1. Pendahuluan
Thank you for choosing the OOYCYOO MPPT Solar Charge Controller. This device is an automatic control unit designed for use in all solar power systems to efficiently manage the charging of batteries from a solar panel array. It utilizes advanced Maximum Power Point Tracking (MPPT) technology to ensure maximum power extraction from your solar panels, providing rapid, efficient, and safe charging for your battery system. This manual provides essential information for the safe installation, operation, and maintenance of your solar charge controller.
2. Petunjuk Keselamatan
Please read all instructions and warnings carefully before installation and operation. Keep this manual for future reference.
- Ensure all wiring is correctly connected and polarity is observed to prevent damage to the controller and other components.
- Always connect the battery first, then the solar panels, and finally the load. Disconnect in the reverse order.
- Do not exceed the maximum PV input voltage (160VDC) or current ratings of the controller.
- Install the controller in a well-ventilated area to ensure proper heat dissipation.
- Avoid short-circuiting the solar panel, battery, or load terminals.
- This device is designed for indoor use. Protect it from direct sunlight, high temperatures, and moisture.
- Hanya personel berkualifikasi yang boleh melakukan pemasangan dan pemeliharaan.
3. Fitur Produk
- Teknologi MPPT Tingkat Lanjut: Continuously tracks the array’s maximum power point for optimal power extraction. Tracking efficiency ≥ 98.1%, peak conversion efficiency up to 98%.
- 4-Stage Charging Algorithm: Features Bulk Charge, Boost Charge, Float Charge, and Equalization for rapid, efficient, and safe battery charging.
- Volume lebartagDukungan e/Power: Supports high PV input power and voltage hingga 160V.
- Multi-Voltage Battery Compatibility: Automatically identifies 12V/24V/36V/48V DC battery systems.
- Versatile Battery Types: Compatible with various battery types including lead-acid (Sealed, Gel, Flooded), lithium (LI, LFP), with pre-set and user-defined charging parameters.
- Sistem Pendinginan Ganda: Constructed with die-cast aluminum for excellent heat dissipation and includes a built-in cooling fan that activates when temperature >45℃ and turns off < 40℃. Fan life up to 5000 hours.
- Blacklight LCD Display: Provides clear real-time system information, including KWH charge amount.
- Perlindungan Keselamatan yang Ditingkatkan: Multiple built-in protection functions for safe and reliable operation.
4. Komponen Produk
The OOYCYOO MPPT Solar Charge Controller features a robust design with clearly labeled terminals and an intuitive LCD display for easy monitoring and control.
- Layar LCD: Shows real-time system status, charging parameters, and energy statistics (KWH).
- Control Buttons (A, B, C, D, SET): Used for navigating menus, adjusting settings, and performing resets.
- Terminal Panel Surya: Connects to the solar panel array.
- Terminal Baterai: Menghubungkan ke bank baterai.
- Terminal Beban: Terhubung ke beban DC.
- 5S Reset Button (A+D): Press A and D buttons simultaneously for 5 seconds to reset.
5. Pengaturan dan Instalasi
Follow these steps for safe and correct installation of your MPPT solar charge controller. Ensure all power sources are disconnected before making any connections.
5.1 Wiring Order
- Hubungkan Baterai: Connect the battery to the controller's battery terminals (positive to positive, negative to negative). Ensure a secure connection. The controller will automatically detect the battery voltage.
- Hubungkan Panel Surya: Connect the solar panel array to the controller's solar panel terminals (positive to positive, negative to negative). Ensure correct polarity.
- Hubungkan Beban: Connect the DC load to the controller's load terminals (positive to positive, negative to negative).
Important: Always connect the battery first and disconnect the solar panels first when disassembling the system.
5.2 Diagram Instalasi
5.3 Pemasangan
- Mount the controller vertically on a wall or stable surface to allow for optimal airflow.
- Ensure there is sufficient space around the controller for heat dissipation, especially above and below the unit where the cooling fan and vents are located.
- Hindari pemasangan di bawah sinar matahari langsung atau di dekat sumber panas.
6. Petunjuk Pengoperasian
Layar LCD 6.1
The blacklight LCD display provides comprehensive information about your solar system's performance. It shows:
- Masukan PV: Jil.tage and current from solar panels.
- Status Baterai: Jil.tage, charge level, and charging stage.
- Output Muat: Current drawn by connected DC loads.
- Energy Statistics: KWH charged.
- System Icons: Indicate solar charging, battery status, load status, temperature, and fault conditions.
6.2 Tombol Kontrol
Use the buttons (A, B, C, D, SET) to navigate through the display menus and adjust parameters. Refer to the on-screen prompts for specific functions.
- Tombol ATUR: Enters/exits menu, confirms selections.
- Tombol A, B, C, D: Navigate menus, adjust values.
- A+D Reset: Press A and D buttons simultaneously for 5 seconds to perform a system reset.
6.3 Pemilihan Jenis Baterai
The controller supports various battery types. Ensure the correct battery type is selected in the settings for optimal charging and battery longevity. The charging algorithm adapts to the selected battery type (e.g., GEL, AGM, Flooded, LI, LiFePO4).
7. Pemeliharaan
Perawatan rutin memastikan umur panjang dan kinerja optimal pengontrol pengisian daya surya Anda.
- Pembersihan: Bersihkan bagian luar pengontrol secara berkala dengan kain kering untuk menghilangkan debu dan kotoran. Pastikan lubang ventilasi bersih.
- Koneksi: Check all wiring connections periodically to ensure they are tight and free from corrosion.
- Operasi Kipas: Listen for the cooling fan to ensure it operates when the controller temperature rises above 45℃. If the fan is not operating, check for obstructions or contact support.
- Pemantauan Sistem: Regularly monitor the LCD display for any fault indicators or unusual readings.
8. Penyelesaian masalah
The controller is equipped with multiple protection functions. If an issue occurs, the LCD display may show a fault code or indicator. Here are common protection functions and potential causes:
| Fungsi Perlindungan | Kemungkinan Penyebab | Larutan |
|---|---|---|
| PV Atas Arus/Daya | Solar panel input power exceeds controller's maximum rating. | Reduce PV input power or check system design. |
| Sirkuit Pendek PV | Short circuit in solar panel wiring. | Inspect and repair PV wiring. |
| Polaritas Terbalik PV | Solar panel connected with incorrect polarity. | Correct PV wiring polarity. |
| Pengisian Terbalik Malam | Current flowing from battery to solar panels at night. | Normal operation, controller prevents significant discharge. |
| Polaritas Baterai Terbalik | Battery connected with incorrect polarity. | Correct battery wiring polarity. |
| Baterai Lebih Voltage | Volume bateraitage exceeds safe limit. | Check battery type settings and ensure proper charging parameters. |
| Baterai Lebih Discharge | Volume bateraitage drops below safe discharge limit. | Charge battery, reduce load, or increase PV input. |
| Kontroler Terlalu Panas | Ambient temperature too high or insufficient ventilation. | Improve ventilation, reduce load, or relocate controller. |
| Memuat Sirkuit Pendek | Short circuit in load wiring. | Inspect and repair load wiring. |
| Beban Berlebihan | Load current exceeds controller's maximum rating. | Mengurangi beban yang terhubung. |
| TVS Volume Tinggitage Transien | Temporary high voltage spike detected. | Usually self-recovering. Check for external electrical disturbances. |
9. Spesifikasi
9.1 General Specifications (EC40A-H & EC60A-H)
- Nominal Sistem Voltage: 12V/24V/36V/48V DC Auto identifying
- Vol bateraitagRentang: 9V ~ 55V
- Maks. PV Sirkuit Terbuka Voltage: Tegangan 160VDC
- Terminal Daya: 6-12 AWG
- Ukuran: Kira-kira. 11 x 6 x 2.5 inci (28 x 15 x 6.3 cm)
- Berat: Sekitar 4 pon (1.8 kg)
- Efisiensi Pelacakan: ≥ 98.1%
- Efisiensi Konversi Puncak: Hingga 98%
- Pendinginan: Dual Cooling (Die-cast aluminum housing + Built-in fan)
- Sertifikasi: CE, FC
9.2 Model-Specific Technical Data
| Parameter | EC40A-H (40A Model) | EC60A-H (60A Model) |
|---|---|---|
| Arus Pengisian Terukur | 40A | 60A |
| 12V Battery System Max. PV Input Power | 500W (PV Voc ≤ 72V) | 720W (PV Voc ≤ 72V) |
| 24V Battery System Max. PV Input Power | 1000W (PV Voc ≤ 108V) | 1440W (PV Voc ≤ 108V) |
| 36V Battery System Max. PV Input Power | 1500W (PV Voc ≤ 144V) | 2100W (PV Voc ≤ 144V) |
| 48V Battery System Max. PV Input Power | 2000W (PV Voc ≤ 160V) | 2800W (PV Voc ≤ 160V) |
9.3 Skenario Aplikasi
10. Kiat Pengguna
- Ukuran yang Tepat: Ensure your solar panel array's total power and voltage are within the controller's specifications for your battery system voltage to prevent damage and ensure efficient operation.
- Kesehatan Baterai: Regularly check your battery's health and water levels (for flooded batteries) to maximize its lifespan.
- Ekspansi Sistem: If expanding your solar system, ensure the new components are compatible with your existing setup and the controller's capacity. For higher current needs, two 60A controllers can be put in parallel to achieve 120A.
11. Garansi dan Dukungan
Untuk informasi garansi, dukungan teknis, atau pertanyaan layanan, silakan hubungi penjual atau produsen Anda secara langsung. Simpan struk pembelian Anda sebagai bukti pembelian.
