Heltec Wireless Brushless DC Controller User Manual

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your Heltec Wireless Brushless DC Controller. Designed for electric two-wheelers and three-wheelers, this controller offers reliable performance with advanced features such as anti-theft, multi-speed control, reversing, and repair functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Produk Lebihview

The Heltec Brushless DC Controller is a high-performance component for electric vehicles, offering robust power output and intelligent control. It is compatible with a wide range of electric two-wheelers (e.g., e-bikes, scooters) and three-wheelers (e.g., tricycles).

Fitur utama meliputi:

• Output Daya Tinggi: Available in 2000W and 2500W versions for strong acceleration and climbing ability.
• Multi-Voltage Dukungan: Operates with 48V, 60V, or 72V battery systems.
• Kontrol Nirkabel: Simplifies installation and reduces wiring complexity.
• Tahan Lama Casing: Features an aluminum waterproof, moisture-proof, and dust-proof casing for extended service life.
• Operasi Kebisingan Rendah: Engineered for quiet performance, as low as 15 decibels.

3. Spesifikasi

Refer to the table below for detailed product parameters for both models.

4. Isi Paket

Paket ini berisi barang-barang berikut:

For 2000W Model:

• Pengontrol * 1
• Sekrup * 5
• Function lines * 3

For 2500W Model:

• Pengontrol * 1
• Sekrup * 5
• Function lines * 3

5. Instalasi dan Pengaturan

This section describes the wiring harness connections for the controller. Please ensure all connections are secure and correct before powering on the system. If the provided plugs are not universal for your vehicle, you may need to adapt the wiring according to the functional wire ends.

5.1. Controller Wiring Harness Description (2500W Model)

• Hall line: Connects to the motor's Hall sensors for position feedback.
• Study line: Used for motor learning/matching.
• Burglar alarm: Connects to the vehicle's alarm system.
• Turn handle: Connects to the throttle/accelerator.
• Layar LCD: Connects to the vehicle's LCD display for information.
• Instrumen: Connects to other vehicle instruments.
• Low brake: Connects to the low-level brake signal.
• High brake: Connects to the high-level brake signal.
• Pelayaran: For cruise control functionality.
• Kabel listrik: Main power input from the battery.
• Astern: For reverse gear functionality.
• Three cycle: Likely related to a three-speed mode or cycle function.
• Tiga kecepatan: For selecting between different speed modes.

5.2. Controller Wiring Harness Description (2000W Model)

• Hall line: Connects to the motor's Hall sensors for position feedback.
• Study wire: Used for motor learning/matching.
• Burglar alarm: Connects to the vehicle's alarm system.
• Alarm Power supply: Provides power for the alarm system.
• Turn handle: Connects to the throttle/accelerator.
• One-click access: Function for quick access or mode change.
• Yadea Instrument: Connects to Yadea brand instruments.
• Astern: For reverse gear functionality.
• Low brake: Connects to the low-level brake signal.
• High brake: Connects to the high-level brake signal.
• Pelayaran: For cruise control functionality.
• Positive electrode wire: Main positive power connection.
• Soft and hard start: For adjusting acceleration characteristics.
• Tiga kecepatan: For selecting between different speed modes.
• Three speed cycle: For cycling through speed modes.

5.3. General Connection Guidance

Ensure all connections are made according to your vehicle's wiring diagram and the functions described above. Incorrect wiring can damage the controller or other vehicle components.

6. Petunjuk Pengoperasian

Once the controller is correctly installed and connected, you can operate your electric vehicle using its various functions:

• Daya Hidup/Mati: Use your vehicle's main power switch. The controller will initialize automatically.
• Kontrol Kecepatan: Use the 'Turn handle' (throttle) to control the vehicle's speed.
• Three-Speed Mode: If your vehicle supports it, use the 'Three speed' or 'Three speed cycle' wire to switch between different speed settings (e.g., low, medium, high).
• Membalikkan: Activate the 'Astern' function for reverse movement, if available on your vehicle.
• Pengereman: The controller integrates with your vehicle's braking system via 'Low brake' and 'High brake' lines.
• Anti pencurian: If connected to an alarm system, the controller supports anti-theft features.
• Kontrol Pelayaran: Engage the 'Cruise' function for maintaining a constant speed, if supported.
• One-Line Pass / Repair: These functions are typically for diagnostic or specific operational modes. Consult your vehicle's manual for specific usage.

7. Pemeliharaan

To ensure the longevity and optimal performance of your Heltec Brushless DC Controller, follow these maintenance guidelines:

• Jaga kebersihan: Regularly clean the exterior of the controller to prevent dust and dirt buildup. Use a soft, dry cloth.
• Hindari Kelembaban: Sementara casing is waterproof and moisture-proof, avoid prolonged exposure to extreme wet conditions or submersion. Ensure all connections are dry before operation.
• Periksa Koneksi: Periksa secara berkala semua sambungan kabel untuk memastikan kekencangannya dan tanda-tanda keausan atau korosi. Sambungan yang longgar dapat menyebabkan pengoperasian yang terputus-putus atau kerusakan.
• Manajemen Suhu: Ensure the controller is installed in a location with adequate airflow to prevent overheating, especially during heavy use.
• Hindari Dampak: Lindungi pengontrol dari benturan fisik, yang dapat merusak komponen internal.

8. Penyelesaian masalah

If you encounter issues with your controller, consider the following general troubleshooting steps:

• Tidak Ada Daya: Check battery connections, main power switch, and the controller's power cord. Ensure the battery is charged.
• Motor Tidak Merespons: Verify all motor phase wires and Hall sensor connections. Check the throttle ('Turn handle') connection.
• Operasi intermiten: Inspect all wiring for loose connections or damaged insulation.
• Kebisingan yang Tidak Biasa: Ensure the motor is properly connected and there are no mechanical obstructions.
• Terlalu panas: Check for proper ventilation around the controller. Reduce load if operating in extreme conditions.

For persistent issues, it is recommended to consult a qualified technician or contact Heltec customer support.

9. Kiat Pengguna

• Pengaturan awal: After installation, perform a motor learning procedure (using the 'Study line') if your motor and controller are not pre-matched. This optimizes performance.
• Jil.tagKompatibilitas: Always ensure your battery voltage matches the controller's supported voltage range (48V/60V/72V) to prevent damage.
• Instalasi Profesional: If you are unfamiliar with electrical wiring, it is highly recommended to seek professional assistance for installation to avoid potential hazards.

10. Garansi dan Dukungan

For warranty information, technical support, or service inquiries, please contact HeltecTools Store directly. Keep your purchase receipt as proof of purchase. Do not attempt to open or modify the controller, as this may void your warranty.