Wavlink AC1200 High Power Wi-Fi Outdoor AP/Repeater/Router User Manual

1. Produk Lebihview

The Wavlink AC1200 High Power Wi-Fi Outdoor AP/Repeater/Router is designed to provide robust and extended wireless connectivity in large outdoor areas such as factories, communities, and streets. It supports simultaneous 2.4GHz and 5GHz wireless network connections, offering combined speeds of up to 1200Mbps. Equipped with high-gain detachable antennas and Power over Ethernet (PoE) support, this device is built to withstand harsh outdoor conditions while delivering reliable Wi-Fi coverage.

Figure 1: Wavlink AC1200 High Power Wi-Fi Outdoor AP/Repeater Overview

2. Isi Paket

Harap verifikasi bahwa semua item ada dalam paket Anda:

• 1 x Wi-Fi AP/Router Unit
• 4 x Antena Omni-directional
• 1 x Kabel Jaringan RJ-45
• 1 x Power Adapter (EU/US/UK/AU plug type, depending on region)
• 1 x POE Converter
• 1 x Main Body Holder
• 2 x Ikatan Kabel
• 1 x Screw Fittings (screws, fixed buckle, plastic rod)
• 1 x Panduan Instalasi Cepat

Gambar 2: Isi Paket

3. Instalasi Perangkat Keras

3.1 Instalasi Antena

1. Carefully spin the 5G antennas into the 5G External RP-SMA connectors on the device.
2. Carefully spin the 2.4G antennas into the 2.4G External RP-SMA connectors on the device.

3.2 Memasang Perangkat

The device can be installed on walls or poles. Ensure the installation location is high and open for optimal signal reception and transmission.

Mounting on Walls:

1. Place the fixed buckle against the wall at the desired height and mark the screw holes.
2. Drill holes and insert the plastic rods.
3. Align the fixed buckle with the holes and secure it to the wall using screws.
4. Attach the outdoor AP unit to the fixed buckle.

Figure 3: Wall Installation Steps

Mounting on Poles:

1. Attach the main body holder to the outdoor AP unit.
2. Secure the outdoor AP unit to a pole using the provided cable ties.

Figure 4: Pole Installation Steps

3.3 Koneksi Power Over Ethernet (PoE)

The device supports passive PoE power supply, allowing for flexible deployment up to 60 meters (196 feet) from a power source. This enables simultaneous power supply and data transmission over a single Ethernet cable.

1. Ensure you use a certified CAT5e/CAT6 Ethernet cable with RJ45 connectors.
2. Connect one end of the Ethernet cable to the LAN DATA IN port of the PoE converter.
3. Connect the other end of the Ethernet cable to the WAN/PoE IN port of the outdoor AP unit.
4. Connect the power adapter to the DC24V port of the PoE converter.
5. Connect another Ethernet cable from your router/network to the PoE port on the PoE converter.

Figure 5: PoE Power Supply Diagram

Figure 6: Detailed Cable and Antenna Installation

4. Configuration and Operating Modes

The Wavlink AC1200 supports multiple operating modes to suit various networking needs.

4.1 Pengaturan Awal

1. After physical installation and power connection, connect your computer to the device's LAN port or wirelessly to its default Wi-Fi network (SSID usually 'WAVLINK-N' or similar, check device label).
2. Buka sebuah web browser and enter the default IP address (e.g., 192.168.10.1) into the address bar.
3. Follow the on-screen prompts to configure your wireless network settings, including selecting an operating mode.

Figure 7: Quick Configuration Steps

Mode Pengoperasian 4.2

The device can operate in the following modes:

• Mode Router: Connects to the internet via a WAN port and creates a private network for connected devices.
• Modus Pengulang: Extends the coverage of an existing Wi-Fi network by repeating its signal.
• Mode AP (Titik Akses): Mengubah koneksi jaringan berkabel menjadi titik akses nirkabel.
• WISP Mode (Wireless Internet Service Provider): Connects wirelessly to an ISP access point and shares the internet connection with local devices.
• Mesh Extender Mode: Supports seamless and stable roaming by extending an existing mesh network. (Note: This device acts as a mesh extender, not a mesh controller.)

Figure 8: Operating Mode Diagrams

5. Spesifikasi

Figure 9: Wireless Configuration Specifications

Gambar 10: Fitur Utamaview

6. Pemeliharaan

• Pembersihan Rutin: Periodically clean the exterior of the device to prevent dust and debris buildup, especially around the ports and antennas.
• Pembaruan Firmware: Check the official Wavlink website for the latest firmware updates. Keeping your device's firmware up-to-date ensures optimal performance, security, and access to new features.
• Pemeriksaan Koneksi: Regularly inspect all cable connections (Ethernet, PoE) for any signs of wear or damage. Ensure they are securely plugged in.
• Tombol Reset: The device features a reset button (labeled 'RESET 8s' or similar) usually located near the ports. Press and hold this button for approximately 8 seconds to restore the device to its factory default settings. Use this only when necessary, as it will erase all custom configurations.

Figure 11: Device Ports and Reset Button Location

7. Penyelesaian masalah

• Tidak ada sinyal Wi-Fi: Verify that the device is powered on and the Wi-Fi LED indicator is lit. Check antenna connections. Ensure the device is configured in the correct operating mode (e.g., AP or Repeater).
• Kecepatan Koneksi Lambat: Ensure the device is placed in an optimal location with clear line-of-sight to client devices and the main router (if in Repeater mode). Check for interference from other wireless devices. Verify that your internet service provider (ISP) is delivering the expected speeds.
• Pemutusan Koneksi yang Sering Terjadi: This could be due to signal interference, an unstable power supply, or an outdated firmware. Try changing the Wi-Fi channel in the device settings. Ensure the power supply is stable and consider updating the firmware.
• Device Resets to Default Settings After Power Loss: If the device consistently resets to its default state after a power outage, ensure that the power supply is stable and that the device's configuration is properly saved. This behavior is unusual and may indicate a power issue or a need for a firmware update.
• Tidak Dapat Mengakses Web Halaman Manajemen: Ensure your computer is connected to the device's network (wired or wireless) and that you are using the correct IP address (default 192.168.10.1). Try clearing your browser's cache or using a different browser.

8. Kiat Pengguna

• For the most reliable connection, select a wireless network with a signal strength greater than 70% when configuring the device in Repeater or WISP mode.
• Install the outdoor antennas at a height of at least 2 meters above the roof or in a high, open area for better reception and wider coverage.
• The actual transmission distance and performance can vary significantly based on your specific environment, including obstacles, interference, and weather conditions.
• Consider using the Mesh Extender mode for seamless roaming if you have a compatible mesh network, providing a consistent Wi-Fi experience across your outdoor space.

9. Garansi dan Dukungan

Wavlink products are designed for reliability and performance. This product comes with a 1-year warranty from the date of purchase. For any quality-related issues within this period, please contact your seller for assistance.

For technical support, product information, or to download the latest drivers and firmware, please visit the official Wavlink website. Most email inquiries are answered within 24 hours.