1. Produk Lebihview
The AGS BL512 is a domestic steel line designed for use in brake, fuel, and transmission systems. This durable component is engineered to provide reliable fluid transfer within automotive applications.
- Jenis: Brake Hydraulic Line
- Nomor Bagian: 077146359156
- Dimensi Paket: 1.27 T x 0.762 L x 33.02 W (sentimeter)
- Berat Paket: 0.009 kilogram
Figure 1: The AGS BL512 steel line, showing its robust construction and threaded fittings at each end, suitable for various automotive fluid transfer applications.
2. Spesifikasi
| Atribut | Detil |
|---|---|
| Merek | AGS |
| Bahan | Baja |
| Warna | Perak / abu-abu |
| Dimensi Produk | 13"L x 13"W (as packaged) |
| Berat Barang | 0.32 ons (sekitar 0.009 kg) |
| Ketebalan Dinding Nominal | 1.3 bulan (Note: This value may indicate a data anomaly and typically refers to a physical measurement unit.) |
| Diameter Luar | 0.75 inci |
| Panjang Barang | 33.02 Sentimeter (sekitar 13 inci) |
| UPC | 077146359156 |
| Nomor Bagian Pabrikan | BL-512 |
3. Pengaturan dan Instalasi
Proper installation of the AGS BL512 line is crucial for safety and performance. This product is intended for professional installation or by individuals with significant automotive repair experience.
3.1 Tindakan pencegahan keselamatan
- Selalu kenakan alat pelindung diri (APD) yang sesuai, termasuk kacamata pengaman dan sarung tangan.
- Pastikan kendaraan ditopang dengan aman menggunakan dongkrak atau alat pengangkat sebelum bekerja di bawahnya.
- Lepaskan sambungan baterai kendaraan jika sedang bekerja di dekat komponen listrik.
- Be aware of hot engine components and exhaust systems.
- Handle brake fluid, fuel, and transmission fluid with care, as they can be corrosive or flammable. Dispose of fluids properly.
3.2 Alat dan Bahan yang Diperlukan
- Line wrenches or flare nut wrenches (to prevent rounding off fittings)
- Tubing bender (if custom bends are required)
- Tubing cutter (if custom length is required)
- Flaring tool (if custom flares are required)
- Brake fluid, transmission fluid, or fuel (as applicable)
- Drain pans and rags
3.3 Langkah-Langkah Instalasi (Umum)
- Persiapan: Identify the old line to be replaced. Clean the surrounding area to prevent contamination.
- Pemindahan: Carefully disconnect the old line from its fittings. Be prepared for fluid leakage. Note the routing of the original line.
- Forming (if necessary): If the new line needs to be bent to match the original routing, use a tubing bender to create smooth, gradual bends. Avoid kinking the line.
- Instalasi: Route the new AGS BL512 line in the same path as the original. Secure it with appropriate clips or fasteners.
- Koneksi: Connect the ends of the new line to the corresponding fittings. Hand-tighten first, then use a line wrench to tighten securely, but do not overtighten.
- Fluid System Specifics:
- Garis Rem: After installation, bleed the brake system thoroughly to remove all air. Check for leaks.
- Saluran Bahan Bakar: Check all connections for leaks before starting the engine.
- Transmission Lines: Refill transmission fluid to the correct level and check for leaks.
- Inspeksi Akhir: Double-check all connections for tightness and ensure the line is not rubbing against any moving parts or sharp edges.
4. Pertimbangan Operasional
Once installed, the AGS BL512 line operates as an integral part of your vehicle's fluid transfer system. Its function is passive, ensuring the safe and efficient flow of brake fluid, fuel, or transmission fluid as intended by the vehicle manufacturer.
No direct user operation is required for the line itself after proper installation and system bleeding/filling. The line is designed to withstand the pressures and temperatures typical of its intended automotive applications.
5. Pemeliharaan
The AGS BL512 steel line is a durable component designed for long service life. Regular inspection is recommended as part of routine vehicle maintenance to ensure continued safety and performance.
5.1 Jadwal Inspeksi
- Inspect the line during routine oil changes or other under-vehicle inspections.
- Check immediately if you notice any signs of fluid leaks, spongy brakes, or unusual odors (like fuel).
5.2 What to Look For
- Kebocoran: Any visible fluid weeping or dripping around the line or its connections.
- Korosi: Significant rust or corrosion on the line, especially in areas exposed to road salt or moisture.
- Kerusakan: Kinks, dents, cracks, or abrasions on the line.
- Koneksi Longgar: Ensure all fittings are tight and secure.
If any issues are detected, it is critical to address them promptly. A compromised brake, fuel, or transmission line can lead to serious safety hazards or vehicle damage. Replacement of the affected line is typically the recommended course of action.
6. Penyelesaian masalah
Troubleshooting issues related to the AGS BL512 line primarily involves identifying and addressing leaks or blockages. Given its passive role, most problems stem from improper installation or physical damage.
6.1 Masalah Umum dan Solusinya
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Fluid Leak at Connection | Loose fitting, damaged flare, cross-threaded connection | Tighten fitting (do not overtighten). If leak persists, inspect flare and fitting for damage. Replace line or fitting if damaged. Ensure correct threading. |
| Fluid Leak Along Line | Corrosion, physical damage (kink, crack, abrasion) | Replace the damaged section of the line or the entire line. |
| Restricted Fluid Flow (e.g., weak brakes, fuel starvation) | Kinked line, internal blockage (rare for new lines) | Inspect the line for kinks. If kinked, replace. If blockage is suspected, flush or replace the line. |
For any persistent or severe issues, it is highly recommended to consult a qualified automotive technician.
7. Garansi dan Dukungan
For specific warranty information regarding the AGS BL512 Domestic Steel Brake/Fuel/Transmission Line, please refer to the documentation provided with your purchase or visit the official AGS websitus. Ketentuan garansi biasanya mencakup cacat produksi.
If you require technical assistance or have questions about the product, please contact AGS customer support through their official channels. Contact information can usually be found on the product packaging or the manufacturer's weblokasi.
AGS Official Weblokasi: www.agscompany.com (Catatan: Ini adalah tempat penampung URLMohon verifikasi informasi resmi yang sebenarnya. website for AGS)
