TFA Digital Comfort Control Thermo-Hygrometer
Modelnya: 30.5011
Perkenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your TFA Digital Comfort Control Thermo-Hygrometer Model 30.5011. This device is designed to monitor indoor temperature and humidity levels, display dew point, and alert you to potential mold risk, helping you maintain a comfortable and healthy indoor environment.
Informasi Keselamatan
- Jangan biarkan perangkat terkena suhu ekstrem, sinar matahari langsung, atau kelembapan tinggi.
- Hindari menjatuhkan perangkat atau membenturkannya dengan kuat.
- Jangan mencoba membongkar atau memperbaiki perangkat sendiri. Hubungi personel yang berkualifikasi untuk mendapatkan layanan.
- Jauhkan baterai dari jangkauan anak-anak. Buang baterai bekas dengan benar sesuai peraturan setempat.
- Lepaskan baterai jika perangkat tidak akan digunakan dalam jangka waktu lama untuk mencegah kebocoran.
Isi Paket
Harap periksa apakah semua barang ada dan dalam kondisi baik:
- TFA Digital Comfort Control Thermo-Hygrometer (Model 30.5011)
- Penyangga yang Dapat Dilepas
- Instruksi Manual (dokumen ini)
Note: 2 AA batteries are required for operation and may be included depending on the retailer.
Perangkat Berakhirview
The TFA Digital Comfort Control Thermo-Hygrometer features a clear display and intuitive controls for monitoring your indoor climate.
Image: The TFA Digital Comfort Control Thermo-Hygrometer (Model 30.5011) shown on a table, displaying current humidity (69%), temperature (18.1°C), and dew point (10.0°C). A red indicator light for mold risk is visible.
Tampilan Depan:
- Tampilan Kelembaban: Shows current relative humidity in percentagdan (%).
- Tampilan Suhu: Shows current temperature in Celsius (°C) or Fahrenheit (°F).
- Dew Point Display: Shows the dew point temperature.
- Indikator Risiko Jamur: A visual alarm (flashing light) and optional audio alarm indicate when humidity levels exceed a set threshold, signaling a risk of mold formation.
- MIN/MAX Indicator: Shows minimum or maximum recorded values.
Back/Side Controls:
- Tombol MIN/MAX: Tekan untuk view minimum/maximum recorded temperature, humidity, and dew point. Press and hold to reset these values.
- Tombol °C/°F: Switch between Celsius and Fahrenheit temperature display.
- Tombol ATUR: Used to enter settings mode for mold alarm thresholds and audio alarm.
- Kompartemen Baterai: Located on the back, for 2 AA batteries.
- Stand Slot: For attaching the detachable stand.
Pengaturan
1. Pemasangan Baterai
- Temukan penutup ruang baterai di bagian belakang perangkat.
- Geser atau buka penutup untuk membuka kompartemen.
- Masukkan dua (2) baterai AA, pastikan polaritasnya benar (+ dan -) seperti yang ditunjukkan di dalam kompartemen.
- Pasang kembali penutup kompartemen baterai dengan aman.
- The device will power on automatically and begin displaying current temperature and humidity.
2. Penempatan
Place the thermo-hygrometer on a flat surface using its detachable stand. For accurate readings, choose a location away from direct sunlight, heat sources, air conditioning vents, and areas with high airflow. Avoid placing it near windows or doors where external conditions might influence readings.
Petunjuk Pengoperasian
Viewing Minimum and Maximum Values
- Tekan tombol MIN / MAX button once to display the maximum recorded temperature, humidity, and dew point since the last reset.
- Tekan tombol MIN / MAX button again to display the minimum recorded values.
- Tekan tombol MIN / MAX button a third time to return to current readings.
- To reset the MIN/MAX values, press and hold the MIN / MAX tombol selama sekitar 3 detik sementara viewing either MIN or MAX values. The display will flash, indicating the values have been reset.
Mengubah Satuan Suhu (°C/°F)
Tekan tombol ° C / ° F button located on the back or side of the device to switch between Celsius and Fahrenheit temperature units.
Setting Mold Alarm Thresholds and Audio Alarm
The device features a visual and optional audio alarm to indicate high humidity levels that could lead to mold growth. The threshold can typically be set to 55%, 60%, or 65% relative humidity.
- Tekan dan tahan tombol MENGATUR button for approximately 3 seconds to enter the alarm setting mode.
- The current humidity threshold will flash. Use the MIN / MAX button to cycle through available thresholds (e.g., 55%, 60%, 65%).
- Tekan MENGATUR again to confirm the humidity threshold and move to the audio alarm setting.
- Gunakan MIN / MAX button to toggle the audio alarm ON or OFF.
- Tekan MENGATUR one more time to save your settings and exit the alarm setting mode.
When the humidity exceeds the set threshold, the red mold risk indicator light will flash. If the audio alarm is enabled, it will also sound.
Pemeliharaan
Pembersihan
Usap perangkat dengan lembut, damp Jangan gunakan pembersih abrasif atau pelarut, karena dapat merusak layar atau komponen lainnya.asing. Pastikan tidak ada uap air yang masuk ke dalam perangkat.
Penggantian Baterai
When the battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps outlined in the Setup section. Always replace both batteries at the same time with new AA batteries.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada tampilan atau tampilan redup | Baterai mati atau tidak terpasang dengan benar. | Ganti baterai dengan baterai AA baru, pastikan polaritasnya benar. |
| Pembacaan yang tidak akurat | Device placed in an unsuitable location (e.g., near heat source, direct sunlight, vent). | Pindahkan perangkat ke lingkungan dalam ruangan yang stabil, jauhkan dari kondisi ekstrem. Beri waktu agar pembacaan stabil. |
| Mold alarm constantly flashing/sounding | High humidity in the environment; alarm threshold set too low. | Ventilate the room to reduce humidity. Adjust the mold alarm threshold to a higher percentage if desired (refer to "Setting Mold Alarm Thresholds"). |
| MIN/MAX values not resetting | Tombol tidak dipegang cukup lama. | Ensure you press and hold the MIN/MAX button for approximately 3 seconds while viewing MIN or MAX values. |
Spesifikasi
- Model: 30.5011
- Merek: TFA
- Kisaran Suhu: -10°C hingga 60°C (14°F hingga 140°F)
- Rentang Kelembaban Relatif: 1% sampai 99%
- Kekuatan: 2 x baterai AA (1.5V)
- Ukuran: 3.74 x 0.98 x 3.74 inci (9.5 x 2.5 x 9.5 cm)
- Berat: 3.17 ons (90 gram)
- Tipe Pemasangan: Meja
Garansi dan Dukungan
Untuk informasi garansi atau dukungan teknis, silakan merujuk ke dokumentasi yang diberikan saat pembelian atau hubungi penjual Anda. Simpan struk pembelian Anda sebagai bukti pembelian.