Perkenalan
The Technoline WS 9140-IT is a temperature station designed for monitoring both indoor and outdoor temperatures. It features a DCF-77 radio-controlled clock for automatic time synchronization, an alarm with snooze function, and records minimum and maximum temperature values. This device can be conveniently placed on a table or mounted on a wall.
Isi Paket
Mohon periksa apakah semua komponen ada di dalam paket:
- 1 x WS 9140-IT Base Station
- 1 x TX37-IT Outdoor Sensor
- User Manual (dokumen ini)
Produk Selesaiview
The Technoline WS 9140-IT consists of a main base station and a wireless outdoor sensor. The base station displays time, indoor temperature, and outdoor temperature. It also features control buttons for settings and functions.
Gambar 1: Technoline WS 9140-IT Temperature Station and its packaging.
Gambar 2: Depan view of the base station and the outdoor sensor, showing display elements and technical specifications.
Base Station Display Elements:
- Tampilan Waktu: Shows current time, synchronized via DCF-77 radio signal.
- Suhu Dalam Ruangan: Displays the temperature measured by the base station.
- Suhu Luar Ruangan: Displays the temperature received from the wireless sensor.
- MIN/MAX Indicators: Shows recorded minimum and maximum temperatures.
- Indikator Baterai: Alerts when batteries are low.
Tombol Kontrol:
- MENGATUR: Enters setting mode.
- ALARM: Activates/deactivates alarm and enters alarm setting mode.
- MIN/MAX RESET: Displays minimum/maximum values and resets them.
- '+' / '-': Menyesuaikan nilai selama pengaturan atau mengubah opsi tampilan.
Pengaturan
1. Pemasangan Baterai
For the Outdoor Sensor (TX37-IT):
- Buka penutup kompartemen baterai di bagian belakang sensor luar ruangan.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Tutup penutup ruang baterai dengan rapat.
For the Base Station (WS 9140-IT):
- Open the battery compartment cover on the back of the base station.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Tutup penutup ruang baterai dengan rapat.
Note: Always insert batteries into the outdoor sensor first, then into the base station to ensure proper synchronization.
2. Penempatan Sensor
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings. The maximum transmission distance is 100 meters in open air. Avoid placing it near large metal objects or electrical appliances that may interfere with the signal.
3. Initial Synchronization (DCF-77 Radio Clock)
After battery installation, the base station will automatically begin searching for the DCF-77 radio signal. This process may take several minutes. Once the signal is received, the time will be set automatically. A radio tower icon will appear on the display, indicating successful synchronization.
4. Manual Time Setting (Optional)
If the radio signal is not available or if you prefer to set the time manually:
- Tekan dan tahan tombol MENGATUR sampai angka jam berkedip.
- Gunakan '+' or '-' tombol untuk mengatur jam.
- Tekan MENGATUR again to confirm and move to minute setting.
- Menggunakan '+' or '-' untuk menyesuaikan menit.
- Tekan MENGATUR to confirm and exit manual time setting.
5. Penyesuaian Zona Waktu
To adjust for different time zones (± 12 hours):
- Dalam mode tampilan waktu normal, tekan dan tahan MENGATUR sampai angka jam berkedip.
- Tekan MENGATUR repeatedly until the time zone offset (e.g., '00') flashes.
- Gunakan '+' or '-' buttons to adjust the time zone offset.
- Tekan MENGATUR untuk mengonfirmasi dan keluar.
Petunjuk Pengoperasian
1. Membaca Suhu
The current indoor and outdoor temperatures are continuously displayed on the base station's screen.
2. Minimum/Maximum Temperature Recording
The station automatically records the minimum and maximum indoor and outdoor temperatures since the last reset.
- Tekan tombol MIN/MAX RESET button once to display the maximum recorded temperatures.
- Tekan tombol MIN/MAX RESET button a second time to display the minimum recorded temperatures.
- Tekan dan tahan tombol MIN/MAX RESET button to clear the recorded minimum and maximum values. The display will show the current temperatures, and new min/max values will begin recording.
3. Alarm Setting and Snooze Function
Mengatur Alarm:
- Tekan tombol ALARM Tekan tombol sekali untuk menampilkan waktu alarm.
- Tekan dan tahan tombol ALARM tombol sampai angka jam alarm berkedip.
- Gunakan '+' or '-' tombol untuk mengatur jam alarm.
- Tekan ALARM again to confirm and move to alarm minute setting.
- Menggunakan '+' or '-' untuk menyesuaikan menit alarm.
- Tekan ALARM untuk mengonfirmasi dan keluar dari pengaturan alarm.
Mengaktifkan/Menonaktifkan Alarm:
- Dalam mode tampilan waktu normal, tekan ALARM button repeatedly to toggle the alarm ON or OFF. An alarm icon will appear on the display when the alarm is active.
Fungsi Tunda:
- When the alarm sounds, press any button (except ALARM) to activate the snooze function. The alarm will sound again after approximately 5 minutes.
- Untuk mematikan alarm sepenuhnya, tekan tombol ALARM button when it is sounding.
4. Indikator Baterai Lemah
A low battery icon will appear on the display when the batteries in either the base station or the outdoor sensor need to be replaced. Replace all batteries promptly to ensure continuous operation and accurate readings.
Pemeliharaan
1. Penggantian Baterai
When the low battery indicator appears, replace the batteries in both the base station and the outdoor sensor. Use 2 x AA Mignon LR06 batteries for each unit. Ensure correct polarity during installation.
2. Pembersihan
Bersihkan unit dengan kain lembut,amp Jangan gunakan pembersih abrasif atau pelarut, karena dapat merusak layar atau komponen lainnya.asing. Ensure the units are dry before re-inserting batteries or operating.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| No outdoor temperature display or '---' | No signal from outdoor sensor; Batteries in sensor are low or incorrectly inserted; Sensor too far from base station or obstructed. | Check sensor batteries and polarity. Move sensor closer to base station. Avoid obstructions like thick walls or metal objects. Re-synchronize by removing and re-inserting batteries in both units (sensor first). |
| Tampilan waktu salah | DCF-77 signal not received; Incorrect time zone setting. | Ensure base station is placed away from electronic interference. Allow time for automatic synchronization. Manually set time or adjust time zone if necessary. |
| Tampilan redup atau kosong | Low batteries in base station. | Replace batteries in the base station. |
| Alarm tidak berbunyi | Alarm is not activated; Alarm time is incorrectly set. | Ensure the alarm icon is visible on the display. Verify the alarm time setting. |
Spesifikasi
- Model: WS 9140-IT
- Merek: Teknolin
- Base Station Dimensions (L x W x H): Ukuran 73x25x158 mm
- Dimensi Sensor Luar Ruangan (P x L x T): Ukuran 38x21x128 mm
- Base Station Power: 2 x AA Mignon LR06 batteries (not included)
- Daya Sensor Luar Ruangan: 2 x AA Mignon LR06 batteries (not included)
- Kisaran Suhu Dalam Ruangan: -10°C hingga +40°C
- Kisaran Suhu Luar Ruangan: -40°C hingga +60°C
- Frekuensi Transmisi: Frekuensi 868 MHz
- Jarak Transmisi: Hingga 100 meter (lapangan terbuka)
- Fitur Khusus: DCF-77 Radio-controlled clock, Manual time setting option, Time zone adjustment (± 12 h), MIN/MAX temperature memory, Alarm with snooze function, Low battery indicator, Wall mount or table stand.
- Bahan: Plastik
Gambar 3: The Technoline WS 9140-IT base station can be wall-mounted for convenient viewing.
Garansi dan Dukungan
Specific warranty information and detailed support contacts are not provided in the product data. For warranty claims or technical assistance, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. You may also visit the official Technoline webSitus untuk informasi dukungan umum.