COX M75 75 ml. x 75 ml. Cartridge Manual Epoxy Applicator

1. Produk Lebihview

An image of the COX M75 manual epoxy applicator, featuring a blue frame, black handle, and metal components for dispensing dual cartridges.

Fitur Utama

• Dedicated mix ratio 1:1
• Stubby cartridge system
• Kemajuan mekanistage 18: 1
• Support discs - secure and accurate cartridge fit
• Wear Compensating Device (WCD)
• Catch plate - sintered steel
• High viscosity materials capability

Deskripsi Produk

The COX M75 is a manual dispenser designed for dual 75ml x 75ml cartridges. It features a stubby cartridge system and provides a mechanical advantage of 18:1, making it suitable for use with low to medium viscosity materials. The applicator includes support discs to ensure a secure and accurate cartridge fit, a durable sintered steel catch plate, and a wear compensating device for extended product life. COX is a recognized leader in quality applicators, with all products manufactured to rigid quality management standards for reliability and durability.

2. Informasi Keselamatan

Always read and understand all safety warnings and instructions before operating this applicator. Failure to do so may result in injury or damage to the product.

• Perlindungan Mata: Always wear appropriate eye protection (safety glasses or goggles) when handling epoxy materials and operating the applicator.
• Perlindungan Kulit: Wear chemical-resistant gloves to prevent skin contact with epoxy resins, which can cause irritation or sensitization.
• Ventilasi: Use the applicator in a well-ventilated area to avoid inhaling fumes from epoxy materials.
• Lembar Data Keselamatan Material (MSDS): Refer to the MSDS provided by the epoxy material manufacturer for specific handling, storage, and disposal instructions.
• Pembuangan yang Benar: Dispose of used cartridges and any epoxy waste according to local regulations.
• Jauhkan dari jangkauan anak-anak: Store the applicator and epoxy materials in a secure location away from children and pets.
• Periksa Sebelum Digunakan: Before each use, inspect the applicator for any signs of damage or wear. Do not use if damaged.

3. Pengaturan

1. Prepare Cartridges: Ensure the dual 75ml x 75ml epoxy cartridges are at the recommended temperature for dispensing as specified by the epoxy manufacturer. Remove any caps or seals from the cartridge nozzles.
2. Tarik kembali pendorong: Pull the plunger rod of the applicator all the way back until it locks into place, creating space for the cartridges.
3. Masukkan Kartrid: Carefully insert the dual epoxy cartridges into the applicator's frame. Ensure the cartridge nozzles are aligned with the front opening and the base of the cartridges rests securely against the support discs. The stubby cartridge system is designed for a precise fit.
4. Pasang Nosel Pencampur: Securely attach the appropriate static mixing nozzle to the end of the cartridges. Ensure it is tightly fastened to prevent leaks during dispensing.

4. Petunjuk Pengoperasian

1. Initial Dispense (Purge): Before applying to your workpiece, dispense a small amount of material onto a scrap surface. This ensures proper mixing within the nozzle and purges any unmixed material.
2. Apply Material: Position the nozzle at the desired application point. Squeeze the trigger handle to dispense the epoxy. The 18:1 mechanical advantage provides efficient dispensing for low to medium viscosity materials.
3. Alur Kontrol: Maintain steady pressure on the trigger for a consistent bead. Release the trigger to stop the flow.
4. Menghilangkan Tekanan: After dispensing, press the thumb release lever (located near the handle) to disengage the plunger rod. This relieves pressure on the cartridges and prevents material from continuing to flow.
5. Remove Cartridges: Once dispensing is complete or if changing cartridges, fully retract the plunger rod and carefully remove the cartridges from the applicator.

5. Pemeliharaan

Proper maintenance ensures the longevity and optimal performance of your COX M75 applicator.

• Pembersihan: After each use, clean any epoxy residue from the applicator frame, plunger rod, and especially the sintered steel catch plate. Use a suitable solvent recommended by the epoxy manufacturer for cleaning uncured epoxy. Avoid harsh abrasives that could damage the finish.
• Pelumasan: Periodically apply a light coat of silicone-based lubricant to the plunger rod to ensure smooth operation.
• Inspect Wear Compensating Device (WCD): The WCD is designed to maintain consistent pressure over time. Regularly check its function to ensure proper engagement with the plunger rod.
• Penyimpanan: Store the applicator in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure the plunger rod is fully retracted before storage.
• Perawatan Nosel: Always remove and properly dispose of used mixing nozzles. Do not attempt to clean and reuse disposable nozzles.

6. Penyelesaian masalah

7. Spesifikasi

8. Garansi dan Dukungan

COX products are manufactured to high standards of quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official COX North America website. For technical support, spare parts, or service inquiries, please contact COX North America directly.

Pabrikan: COX North America
Weblokasi: www.cox-aplikator.com (This is a general placeholder link, please refer to official product documentation for exact support contact details.)