1. Pendahuluan
Itu Amprobe LAN-1 LAN Cable Tester is a diagnostic tool designed to identify and trace data cables and connectors. It helps detect common wiring issues such as shorts, miswirings, and open circuits in various cable types. This manual provides detailed instructions for the proper use, setup, and maintenance of your LAN-1 tester.
The LAN-1 evaluates most common cable types, including 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, as well as RJ45 and BNC connectors. It can test cables up to 300 meters long and uses LED indicators and an audible buzzer to signal cable status and errors.
2. Informasi Keselamatan
Harap baca dan pahami semua petunjuk keselamatan sebelum mengoperasikan Amprobe LAN-1 LAN Cable Tester. Failure to follow these instructions may result in injury or damage to the device.
- Jangan gunakan perangkat jika tampak rusak atau tidak berfungsi dengan benar.
- Ensure the correct battery type and polarity are used during installation.
- Hindari memaparkan perangkat pada suhu ekstrem, kelembapan, atau sinar matahari langsung.
- Jangan mencoba memperbaiki atau memodifikasi perangkat sendiri. Serahkan semua perbaikan kepada personel yang berkualifikasi.
- Always disconnect the cable tester from any active network or power source before performing maintenance or battery replacement.
3. Isi Paket
Verifikasi bahwa semua item yang tercantum di bawah ini ada dalam paket Anda:
- LAN-1 LAN Cable Tester
- (1) Remote terminator
- (1) RJ45 to female BNC cable
- (1) RJ45 to male BNC cable
- (1) RJ45 to RJ45 cable
- (1) Female BNC to female BNC cable
- (1) 9V battery (installed)
- Instruksi (manual ini)
4. Produk Lebihview
Itu Amprobe LAN-1 features a compact design with intuitive controls and clear LED indicators for efficient cable testing.
4.1 Fitur Utama
- Cable Testing: Locates and traces data cables and connectors to identify shorts, miswiring, and opens.
- Kompatibilitas Serbaguna: Evaluates 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, along with RJ45 and BNC connectors.
- Indikasi Kesalahan: An audible buzzer indicates an error condition in the cable.
- Jangkauan yang Diperluas: Tests cables up to 300 meters long.
- Hapus Tampilan: Eighteen red and green LEDs indicate the source or test results.
- Mode Tes: Supports Loopback Test and Remote Test functions.
- Kepatuhan Keselamatan: CE - EMC certified.
4.2 Identifikasi Komponen
Gambar 1: Depan view dari Amprobe LAN-1 LAN Cable Tester. This image displays the main unit with its LED pin-out indicator, battery status light, and control buttons including AUTO, MAN, HOLD, TEST, BATT, and the power button.
Gambar 2: Amprobe LAN-1 LAN Cable Tester showing the main unit and the remote terminator module. This view highlights how the remote unit connects to the main tester for comprehensive cable testing.
- PIN-OUT INDICATOR LEDs: Displays the wiring status for each pin (1-8) and ground (G).
- BATT LED: Menunjukkan status baterai.
- Tombol OTOMATIS: Initiates automatic scanning of cable pins.
- MAN Button: Allows manual step-through of cable pins.
- Tombol TAHAN: Pauses the current test result display.
- Tombol UJI: Starts a test cycle.
- POWER Button (Yellow): Menyalakan dan mematikan perangkat.
- Port RJ45: For connecting RJ45 cables.
- BNC Port: For connecting BNC cables.
- Remote Terminator: A separate module used for testing installed cables or long runs.
5. Pengaturan
5.1 Pemasangan Baterai
The LAN-1 tester is powered by one 9V battery, which is typically pre-installed. If replacement is needed:
- Pastikan perangkat dimatikan.
- Temukan penutup kompartemen baterai di bagian belakang unit utama.
- Remove the screw(s) securing the cover and carefully open it.
- Remove the old 9V battery and disconnect it from the terminals.
- Connect a new 9V battery, ensuring correct polarity (+ to + and - to -).
- Masukkan baterai ke dalam kompartemen dan pasang kembali penutupnya, kencangkan dengan sekrup.
The battery provides power for up to 20 hours of testing.
5.2 Menghubungkan Kabel untuk Pengujian
Before testing, ensure the cable is disconnected from any active network equipment.
- For patch cables (short cables not installed in walls): Connect one end of the cable to the RJ45 or BNC port on the main unit and the other end to the corresponding port on the remote terminator.
- For installed cables (e.g., wall plates, patch panels): Connect one end of the cable to the RJ45 or BNC port on the main unit. Connect the remote terminator to the other end of the installed cable (e.g., at the wall plate in another room).
6. Petunjuk Pengoperasian
6.1 Menghidupkan/Mematikan
Tekan kuning KEKUATAN button to turn the device on. Press it again to turn the device off.
6.2 Melakukan Tes
Once the cable is connected, you can perform a test:
- Tekan tombol TES button to initiate a cable test.
- Automatic Scan (AUTO mode): Tekan tombol MOBIL button. The tester will automatically scan through each pin (1-8 and G) and display the results sequentially. This is suitable for quick checks.
- Manual Scan (MAN mode): Tekan tombol PRIA Tombol itu ditekan setiap kali ditekan. PRIA button will advance the test to the next pin, allowing for a detailed examination of each connection.
- Fungsi Hold: Tekan tombol MEMEGANG button to pause the current display of the pin-out indicator. Press it again to resume scanning.
6.3 Menginterpretasikan Indikator LED
The 18 red and green LEDs on the PIN-OUT INDICATOR provide visual feedback on the cable's status:
- LED hijau: Indicates a correct connection for the corresponding pin.
- LED Merah: Indicates an error for the corresponding pin (e.g., open circuit, short circuit, miswiring).
- Tidak ada LED: May indicate an open circuit or a broken wire for that pin.
- Bel: An audible buzzer will sound when an error condition is detected, providing an additional alert.
The LEDs on the remote module will mirror the main unit's display for the corresponding pins, allowing for verification of end-to-end continuity.
6.4 Pemeriksaan Status Baterai
Tekan tombol BATT button to check the battery level. The BATT LED will illuminate if the battery has sufficient power. If the BATT LED does not light up or is dim, replace the 9V battery.
7. Pemeliharaan
7.1 Pembersihan
To ensure the longevity and proper functioning of your LAN-1 tester, keep it clean and free from dust and debris.
- Lap bagian luar perangkat dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
- Ensure no moisture enters the ports or battery compartment.
7.2 Penggantian Baterai
Replace the 9V battery when the BATT LED indicates low power or if the device fails to power on. Refer to Section 5.1 for detailed battery installation instructions.
Selalu buang baterai bekas sesuai dengan peraturan setempat.
8. Penyelesaian masalah
Jika Anda mengalami masalah dengan Amprobe LAN-1 LAN Cable Tester, refer to the following common problems and solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Perangkat tidak menyala. | Baterai lemah atau mati; pemasangan baterai salah. | Ganti baterai 9V, pastikan polaritasnya benar. |
| No LED activity during test. | Cable not properly connected; faulty cable; remote terminator not connected. | Ensure cables are securely connected to both the main unit and remote terminator. Test with a known good cable. |
| Buzzer sounds continuously or unexpectedly. | Short circuit or severe miswiring detected. | Examine the cable for physical damage or incorrect wiring. Check connectors for bent pins. |
| Inconsistent test results. | Loose connections; intermittent cable fault; low battery. | Ensure all connections are tight. Replace battery. Try wiggling the cable during test to identify intermittent faults. |
9. Spesifikasi
| Model | Bahasa Indonesia-1 |
| Catu Daya | (1) 9V battery |
| Daya Tahan Baterai | Up to 20 hours of tests |
| Jenis Kabel yang Diuji | 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, Token Ring cables |
| Cable Connector Types | RJ45 and BNC |
| Panjang Garis Maksimum | 300m |
| Berat | 0.6 lb. / 0.27 kg (approx. 9.5 ounces) |
| Dimensi (T x L x D) | 5.1 x 2.2 x 1.5 inci / 130 x 56 x 38 mm |
| Menampilkan | 18 LEDs (9 Red and 9 Green), 9 LEDs on Remote module |
| Kepatuhan Keselamatan | CE - EMC |
10. Informasi Garansi
Itu Amprobe LAN-1 LAN Cable Tester comes with a Garansi Terbatas Satu Tahun. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, neglect, or unauthorized repair.
For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Amprobe customer support.
11. Dukungan Pelanggan
If you have any questions, require technical assistance, or need to report a problem with your Amprobe LAN-1 LAN Cable Tester, please contact Amprobe customer support.
Silahkan kunjungi officialnya Ampjubah websitus untuk informasi kontak dan sumber daya dukungan terkini.
Sumber Daya Daring: situs web resmi.ampjubah.com