Leviton 20A 125V Industrial Grade 4-in-1 Receptacle User Manual

Perkenalan

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Leviton 20A 125V Industrial Grade 4-in-1 Receptacle, Model 21254-HI. Please read this manual thoroughly before installation and retain it for future reference.

Informasi Keselamatan

PERINGATAN: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

PERINGATAN: Use this device only with copper or copper-clad wire. Do not use with aluminum wire.

Fitur Produk

• 20 Amp, 125 Volt rating
• Grounding type receptacle
• Durable Nylon body material
• Zinc-plated steel 8-32 mounting screws
• Industrial Series Extra Heavy Duty Hospital Grade design
• 4-in-1 receptacle configuration
• Ivory color finish

Isi Paket

• 1 x Leviton 20A 125V Industrial Grade 4-in-1 Receptacle (Model 21254-HI)

Image: Leviton 20A 125V Industrial Grade 4-in-1 Receptacle in Ivory. This image shows the front view of the electrical outlet with four receptacles.

Petunjuk Instalasi

1. Matikan Daya: Locate the circuit breaker or fuse box that controls the power to the outlet where you intend to install the receptacle. Turn off the power completely and verify it is off using a voltage penguji.
2. Remove Old Receptacle (if applicable): Carefully remove the wall plate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
3. Siapkan Kabel: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight and free of nicks.
4. Hubungkan Kabel:
   • Hubungkan kabel ground tembaga hijau atau telanjang to the green grounding screw on the receptacle.
   • Hubungkan white neutral wire to the silver-colored screw terminals.
   • Hubungkan black or colored hot wire to the brass-colored screw terminals.

   Ensure all connections are tight and secure. For back-wiring, insert stripped wires into the appropriate holes and tighten screws.

5. Dudukan Stopkontak: Carefully fold the wires into the electrical box. Secure the new receptacle to the electrical box using the provided mounting screws.
6. Pasang Pelat Dinding: Attach the wall plate over the receptacle.
7. Pulihkan Daya: Nyalakan kembali daya pada pemutus arus atau kotak sekering.
8. Tes: Test the receptacle with a known working device to ensure proper operation.

Selalu konsultasikan dengan teknisi listrik yang berkualifikasi jika Anda tidak yakin tentang bagian mana pun dari proses pemasangan.

Operasi

The Leviton 21254-HI receptacle provides four outlets for connecting electrical devices. Simply insert the plug of your device into any of the available outlets. This heavy-duty receptacle is designed for demanding environments, offering reliable power connections.

Penting: Do not overload the receptacle. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle.

Pemeliharaan

• Pembersihan: To clean the receptacle, first turn off the power at the circuit breaker. Use a soft, damp Gunakan kain untuk menyeka permukaan. Jangan gunakan pembersih abrasif atau pelarut.
• Inspeksi: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off power and replace the receptacle immediately.
• Keketatan: Ensure mounting screws and wire connections remain tight. Loose connections can cause overheating.

Penyelesaian Masalah

Spesifikasi

Garansi dan Dukungan

For warranty information or technical support, please contact Leviton customer service. Details can typically be found on the product packaging or the official Leviton weblokasi.

Leviton Resmi Weblokasi: www.leviton.com