1. Pendahuluan
1.1 Produk Lebih dariview
The Excalibur X500.2 is a compact 2-channel amplifier designed for car audio systems, offering a peak power output of 1000 watts. This amplifier provides flexible power options, delivering 2 × 50 W RMS at 4 Ohms or 1 × 150 W RMS when configured in bridged mode. It features advanced sound control capabilities, including adjustable high-pass and low-pass filters, and a bass boost function that allows for sound customization up to +12 dB. Integrated thermal and short-circuit protections ensure reliable operation. With its compact dimensions of 225 × 230 × 55 mm and a weight of approximately 1.95 kg, the X500.2 is suitable for installation in various vehicle types.
Figure 1: Excalibur X500.2 2-Channel 1000W Car Audio Amppenguat. Gambar ini menampilkan tampilan dari atas ke bawah. view dari amppengangkat, pertunjukanasing hitamnya casing with silver accents and the Excalibur logo.
2. Informasi Keselamatan
Please read all instructions carefully before installing and operating your Excalibur X500.2 amppenguat. Kegagalan mengikuti pedoman ini dapat mengakibatkan kerusakan pada amppenguat, kendaraan, atau cedera pribadi.
- Selalu lepaskan terminal negatif baterai kendaraan sebelum memulai pekerjaan kelistrikan apa pun.
- Pastikan grounding yang tepat untuk mencegah bahaya listrik.
- Use appropriate gauge wiring for power and speaker connections as specified in this manual.
- Hindari pemasangan amplifier di lokasi yang terkena sinar matahari langsung, panas berlebih, kelembapan, atau debu.
- Jangan membuka amppengangkat casing. Tidak ada komponen di dalamnya yang dapat diservis oleh pengguna. Serahkan semua servis kepada teknisi yang berkualifikasi.
- Protect wiring from sharp edges and moving parts to prevent shorts and damage.
3. Isi Paket
Verifikasi bahwa semua item ada dalam paket:
- Excalibur X500.2 2-Channel Amppengangkat
- Perlengkapan Pemasangan (sekrup)
- User Manual (dokumen ini)
- Spare Fuse (if included)
4. Fitur Produk
- Flexible Power Output: Delivers 2 × 50 W RMS at 4 Ohms or 1 × 150 W RMS in bridged mode at 4 Ohms.
- Advanced Sound Control: Equipped with adjustable high-pass (HPF) and low-pass (LPF) filters for precise audio tuning.
- Fungsi Penguatan Bass: Provides bass amplification up to +12 dB for enhanced low-frequency response.
- Integrated Protection: Features thermal and short-circuit protection circuits to ensure amplifier longevity and safe operation.
- Desain Kompak: Dimensions of 225 × 230 × 55 mm allow for versatile installation in various vehicle environments.
5. Kontrol dan Koneksi
5.1 Panel Input dan Kontrol
Figure 2: Input and Control Panel. This image shows the side of the amplifier featuring the RCA input jacks, crossover switches, gain control, bass boost, and treble controls.
- Input RCA (INPUT L/R): Connects to the RCA pre-out from your head unit or source.
- Crossover Switch (CROSSOVER): Selects between High Pass Filter (HPF), Low Pass Filter (LPF), or FULL range.
- HPF/LPF Frequency Control: Adjusts the cutoff frequency for the selected filter.
- Gain Control (GAIN): cocok dengan ampSensitivitas input amplifier terhadap level output head unit Anda.
- Bass Boost (BASS): Adjusts the level of bass enhancement.
- Kontrol Treble (TREBLE): Adjusts the level of treble.
5.2 Panel Daya dan Output Speaker
Figure 3: Power and Speaker Output Panel. This image displays the opposite side of the amplifier, showing the power input terminals, fuse, and speaker output terminals.
- Terminal Darat (GND): Connects to a solid chassis ground point in the vehicle.
- Remote Terminal (REM): Terhubung ke kabel pengaktifan jarak jauh dari unit utama Anda.
- +12V Power Terminal (+12V): Connects directly to the positive terminal of the vehicle's battery via an inline fuse.
- Fuse Holder (FUSE 30A): Contains the main protection fuse for the amppengangkat.
- Indikator Daya/Proteksi: LEDs indicating power status (green) and protection mode (red).
- Speaker Output Terminals (L/R, BRIDGE): Connects to your speakers. Use L and R for stereo operation, or BRIDGE for mono operation.
6. Pengaturan dan Instalasi
6.1 Pemasangan Amppengangkat
Pilih lokasi pemasangan yang kering, berventilasi baik, dan terlindung dari sinar matahari langsung dan panas berlebih. Pastikan ada ruang yang cukup di sekitar amplifier for proper cooling. Use the provided mounting hardware to secure the ampPasang amplifier dengan kuat ke permukaan yang kokoh di dalam kendaraan Anda.
6.2 Koneksi Kabel
- Kabel Daya: Run a power cable (minimum 8-gauge recommended) from the vehicle's positive battery terminal to the amplifier's +12V terminal. Install an inline fuse holder (30A) within 18 inches (45 cm) of the battery.
- Pengkabelan Ground: Hubungkan kabel ground (dengan ukuran yang sama seperti kabel daya) dari ampHubungkan terminal GND amplifier ke permukaan logam yang bersih dan tidak dicat pada sasis kendaraan. Pastikan koneksi listrik yang kuat.
- Pengkabelan Pengaktifan Jarak Jauh: Connect a remote turn-on wire (18-gauge recommended) from your head unit's remote output to the ampTerminal REM penguat.
- RCA Input Connections: Hubungkan kabel RCA dari output pre-out head unit Anda ke... amplifier's RCA INPUT L/R jacks.
- Koneksi Pembicara: Connect your speakers to the SPEAKER OUTPUT terminals. For stereo operation, connect left and right speakers to their respective terminals. For bridged mono operation, connect a single speaker to the BRIDGE terminals. Ensure correct polarity.
7. Petunjuk Pengoperasian
7.1 Penyalaan Awal
Setelah semua sambungan terpasang dan diverifikasi, sambungkan kembali terminal negatif baterai kendaraan. Hidupkan unit head Anda. amplifier's power indicator LED should illuminate green. If the protection LED illuminates red, refer to the troubleshooting section.
7.2 Menyesuaikan Pengaturan
- Penyesuaian Keuntungan: Start with the gain control at minimum. Play a familiar piece of music at a moderate volume on your head unit. Slowly increase the amplifier's gain until you hear distortion, then back off slightly. This sets the maximum clean output.
- Pengaturan Persilangan:
- HPF (Filter Akses Tinggi): Use for full-range speakers to block low frequencies, preventing distortion and improving clarity. Adjust the frequency to suit your speakers.
- LPF (Filter Lolos Rendah): Use for subwoofers to allow only low frequencies to pass, ensuring deep bass reproduction. Adjust the frequency to match your subwoofer's characteristics.
- PENUH: Memungkinkan semua frekuensi untuk melewatinya.
- Bass Boost and Treble: Adjust these controls to fine-tune the sound to your personal preference. Use sparingly to avoid distortion.
8. Pemeliharaan
The Excalibur X500.2 amplifier requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they are secure and free from corrosion. Do not use harsh chemicals or abrasive cleaners on the ampPermukaan penguat suara.
9. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada daya (LED daya mati) | Sekring putus, koneksi daya/arde buruk, tidak ada sinyal remote. | Memeriksa amplifier fuse, inline fuse, power and ground wiring. Verify remote turn-on signal from head unit. |
| Protection LED on (Red) | Short circuit in speaker wiring, amplifier overheating, impedance too low. | Check speaker wiring for shorts. Ensure proper ventilation. Verify speaker impedance matches ampspesifikasi lifier. |
| Tidak Ada Suara | RCA cables disconnected, gain too low, head unit settings. | Check RCA connections. Adjust gain. Verify head unit volume and settings. |
| Suara Terdistorsi | Gain too high, improper crossover settings, damaged speakers. | Reduce gain. Adjust crossover settings. Inspect speakers for damage. |
10. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Nomor Model | X500.2 |
| Merek | Pedang Excalibur |
| Jumlah Saluran | 2 |
| Daya Keluaran (Puncak) | 1000 Watt |
| Daya RMS (4 Ohm) | 2x50W |
| RMS Power (4 Ohms Bridged) | 1x150W |
| Dimensi (P x L x T) | 225 x 230 x 55 mm (sekitar 8.86 x 9.06 x 2.17 inci) |
| Berat | 1.95 kg (sekitar 4.3 pon) |
| Jil.tage | 8 Volt (Operasi) |
| Volume Pasokan Maksimumtage | 12 Volt |
| Jenis Pemasangan | Through-hole or Surface Mount |
| Spesifikasi yang Sesuai | CE, RoHS |
| Bahan | Plastik |
| Negara Asal | Cina |
11. Garansi dan Dukungan
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Excalibur websitus. Simpan bukti pembelian Anda untuk klaim garansi.
