Klipsch R-5650-S II In-Wall Speaker User Manual

1. Pendahuluan

Terima kasih sudah membeliasing the Klipsch R-5650-S II In-Wall Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read these instructions thoroughly before beginning installation or use to ensure optimal performance and safety.

Fitur Utama:

• Dual 1-inch (2.54cm) Titanium diaphragm compression driver mated to a pivoting 90° x 90° square Tractrix Horn.
• 6.5-inch Cerametallic cone woofer for robust bass response.
• Two vertically stacked Tractrix Horn-loaded tweeters designed to enhance surround sound effects.
• Horn-loaded technology engineered to increase acoustic output and reduce distortion.
• IR receiver knock out for integration with remote control systems.

2. Petunjuk Keselamatan

Always observe the following safety precautions to prevent damage to the speaker or injury to yourself:

• Baca Instruksi: Semua petunjuk keselamatan dan pengoperasian harus dibaca sebelum produk dioperasikan.
• Simpan Instruksi: Petunjuk keselamatan dan pengoperasian harus disimpan untuk referensi di masa mendatang.
• Perhatikan Peringatan: Semua peringatan pada produk dan petunjuk pengoperasian harus dipatuhi.
• Instalasi: Installation should only be performed by qualified personnel. Ensure the mounting surface can support the speaker's weight.
• Pengkabelan: Ensure all wiring is correctly connected and insulated to prevent short circuits or electrical hazards. Turn off power to the amplifier sebelum membuat sambungan.
• Kelembaban: This speaker is not waterproof. Do not expose it to water or excessive moisture.
• Pembersihan: Unplug the product from the amplifier before cleaning. Use a dry cloth only.

3. Isi Paket

The Klipsch R-5650-S II In-Wall Speaker package typically includes:

• One (1) Klipsch R-5650-S II In-Wall Speaker
• Installation Template (usually printed on the packaging)

Note: Additional tools and wiring are required for installation and are not included.

4. Pengaturan dan Instalasi

Proper installation is crucial for optimal sound performance and speaker longevity. Consult a professional installer if you are unsure about any steps.

4.1 Perencanaan Penempatan Pembicara

For surround sound applications, position the R-5650-S II speakers on the side or rear walls, typically at or slightly above ear level when seated. The unique horn array allows for flexible placement while maintaining an enveloping sound field.

4.2 Persiapan Dinding

1. Temukan Stud: Use a stud finder to locate wall studs and avoid them when choosing your mounting location. Ensure there are no electrical wires or plumbing in the desired area.
2. Trace Cutout: Use the provided cutout template to trace the opening on the wall.
3. Pembukaan Potongan: Carefully cut the opening in the drywall using a drywall saw.

4.3 Koneksi Kabel

Sebelum melakukan koneksi apa pun, pastikan Anda amplifier or receiver is turned off and unplugged from the power outlet.

1. Run speaker wire (minimum 16-gauge, heavier for longer runs) from your amplifier to the wall opening.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of the speaker wires.
3. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the amplifier. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.

Gambar 1: Internal view of the Klipsch R-5650-S II In-Wall Speaker, showing the woofer, dual tweeters, and crossover components.

4.4 Memasang Speaker

1. Carefully insert the speaker into the wall opening.
2. Tighten the dog-leg mounting clamps (usually by turning screws on the front baffle) until the speaker is securely fastened to the wall. Do not overtighten.
3. Attach the magnetic grille to the speaker baffle. The grille is designed to snap into place.

5. Petunjuk Pengoperasian

Once installed and connected, your Klipsch R-5650-S II In-Wall Speaker is ready for use.

1. Pastikan semua koneksi aman.
2. Colokkan dan nyalakan amppengangkat atau penerima.
3. Pilih sumber input yang sesuai pada perangkat Anda. amppengangkat.
4. Start playback at a low volume and gradually increase it to your desired listening level.

The pivoting Tractrix Horn allows you to direct the high-frequency sound towards the primary listening area for optimized sound imaging.

6. Pemeliharaan

Your Klipsch R-5650-S II In-Wall Speaker requires minimal maintenance.

• Pembersihan: Use a soft, dry cloth to gently wipe the speaker grille and frame. Avoid using abrasive cleaners, solvents, or excessive moisture.
• Perawatan Kisi-kisi: The magnetic grille can be removed for cleaning if necessary. Handle with care to avoid bending or damaging it.
• Inspeksi: Periksa sambungan kabel speaker secara berkala untuk memastikannya tetap aman.

7. Penyelesaian masalah

If you encounter issues with your speaker, refer to the following common troubleshooting steps:

8. Spesifikasi

9. Informasi Garansi

The Klipsch R-5650-S II In-Wall Speaker comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Klipsch websitus web atau kartu garansi yang disertakan dengan pembelian Anda. Simpan bukti pembelian Anda untuk klaim garansi.

10. Dukungan

Untuk bantuan lebih lanjut, dukungan teknis, atau untuk view additional product information, please visit the official Klipsch weblokasi:

www.klipsch.com