Perkenalan
This manual provides essential instructions for the safe and efficient operation of your Pro-Ject Pre Box RS Stereo Preamplifier. Please read this manual thoroughly before using the device and retain it for future reference. The Pro-Ject Pre Box RS is a high-fidelity stereo preamplifier designed to provide precise signal amplification and versatile connectivity options for your audio system.
Petunjuk Keselamatan
- Pastikan voltase catu dayatage sesuai dengan persyaratan yang ditetapkan pada unit.
- Jangan biarkan unit terkena hujan atau kelembapan.
- Hindari meletakkan unit di dekat sumber panas atau terkena sinar matahari langsung.
- Jangan membuka casing. Serahkan semua servis kepada personel yang berkualifikasi.
- Disconnect the power cord from the outlet if the unit will not be used for an extended period.
Pengaturan
1. Membongkar
Hapus pra dengan hati-hatiamplifier from its packaging. Check for any signs of damage during transit. Keep the original packaging for potential future transport or servicing.
2. Connecting Audio Sources and Outputs
The rear panel of the Pre Box RS offers a variety of input and output options for connecting your audio components. Refer to the image below for a visual guide to the connections.
Gambar 1: Koneksi Panel Belakang. This image displays the rear panel of the Pro-Ject Pre Box RS preamplifier. Visible connections include RCA inputs (In 1, In 2, In 3), XLR inputs (In 4 L/R, In 5 L/R, In 6 L/R), RCA outputs (Out R, Pre Out R, Out L, Pre Out L), and the 18V power input. The serial number and manufacturer information are also visible.
- Masukan: Connect your audio sources (e.g., CD player, streamer, phono stage) to the available RCA inputs (In 1, In 2, In 3) or XLR inputs (In 4 L/R, In 5 L/R, In 6 L/R). Ensure correct left and right channel connections.
- Keluaran: Hubungkan praamplifier's outputs to your power amplifier or active speakers. The unit provides both RCA (Out R, Out L) and XLR (Pre Out R, Pre Out L) outputs for flexible integration into your audio system.
3. Koneksi Daya
Connect the supplied 18V DC power adapter to the 'Power 18V' input on the rear panel of the preamplifier. Then, plug the power adapter into a suitable wall outlet. Ensure all audio connections are secure before powering on the unit.
Petunjuk Pengoperasian
1. Menghidupkan/Mematikan
Locate the power button on the front panel of the Pre Box RS. Press it once to power on the unit. Press it again to power off. Allow a few seconds for the unit to stabilize after powering on.
2. Pemilihan Masukan
Use the input selector on the front panel to choose your desired audio source. Cycle through the available inputs (In 1, In 2, In 3, In 4, In 5, In 6) until the active source is selected.
3. Kontrol Volume
Adjust the volume using the dedicated volume knob on the front panel. Start with a low volume setting and gradually increase it to a comfortable listening level.
4. Tube Output Stage
The Pre Box RS features a tube output stage. This can typically be engaged or disengaged via a switch on the front panel. Experiment with both modes to find your preferred sound signature, as the tube stage introduces a characteristic warmth and realism to the audio.
Pemeliharaan
Pembersihan
Disconnect the preamplifier from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use liquid cleaners or abrasive materials, as they may damage the finish.
Penggantian tabung
The tubes in the Pre Box RS have a finite lifespan. If you notice a degradation in sound quality or unusual noise, the tubes may need replacement. This procedure should only be performed by qualified service personnel or by following specific instructions provided by Pro-Ject. Contact your dealer or Pro-Ject support for guidance on tube replacement.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada daya | Kabel daya tidak tersambung; stopkontak rusak. | Periksa sambungan kabel daya; coba stopkontak yang lain. |
| Tidak ada suara | Incorrect input selected; cables loose; power ampmatikan. | Select correct input; check all audio cable connections; ensure power amplifier aktif. |
| Suara terdistorsi | Input signal too high; faulty cables; damaged tubes. | Reduce source volume; replace cables; consult service for tube inspection. |
| Suara dengungan atau dengung | Ground loop; faulty cables; proximity to interference sources. | Ensure proper grounding; try different cables; move unit away from other electronics. |
Spesifikasi
- Nomor Model: 13184
- Dimensi Produk: 15.59x13.31x7.32 inci
- Berat Barang: 8 pon
- Pabrikan: Proyek
- ASIN: B00AE7YTTW
- Tanggal Pertama Tersedia: 5 Desember 2012
Garansi dan Dukungan
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Pro-Ject Audio Systems website. Contact your authorized Pro-Ject dealer for service or assistance.
Pro-Ject Audio Systems: www.proyek-audio.com
