Perkenalan
The Pinlock HJ-20M lens is an anti-fog insert designed to prevent fogging on your motorcycle helmet visor. It creates a double-glazed effect by forming an airtight seal between the Pinlock lens and the helmet visor, effectively isolating the temperature difference that causes fog.
Kesesuaian
This Pinlock lens is specifically designed for HJC HJ-20M face shields. It is compatible with HJC FG-17 and HJC IS-17 helmet models that feature Pinlock-ready visors.
Catatan: Ensure your helmet visor has the built-in Pinlock pins for proper installation.
Pengaturan dan Instalasi
- Siapkan Pelindung Wajah: Remove your helmet visor from the helmet. Clean the inside of the visor thoroughly with a soft cloth and mild soap and water. Ensure it is completely dry and free of dust or debris.
- Lenturkan Visor: Gently flex the visor flat to allow the Pinlock pins to move closer together. This will create tension when the Pinlock lens is installed.
- Posisikan Lensa: Align the Pinlock lens with the pins on the inside of your visor. The silicone seal on the Pinlock lens should face the visor.
- Insert the Pins: Carefully insert one side of the Pinlock lens onto a pin. While keeping the visor flexed, gently push the other side of the Pinlock lens onto the second pin.
- Periksa Segelnya: Release the visor. The Pinlock lens should now be securely in place with a tight seal around its edges. If there are gaps, remove the lens, flex the visor more, and re-install.
Deskripsi Teks Gambar: The image displays a clear, curved plastic lens, which is the Pinlock HJ-20M anti-fog insert. It has a slightly elongated oval shape, tapering at both ends. Small, semi-circular cutouts are visible at each end, designed to engage with the Pinlock pins on a helmet visor. The lens appears smooth and transparent, indicating its function as an optical insert.
Petunjuk Pengoperasian
Once properly installed, the Pinlock lens operates automatically to prevent fogging. No special actions are required during use. The lens maintains a clear field of vision by creating an insulating air layer between itself and the main visor.
Perawatan dan Pembersihan
Cleaning the Pinlock Lens
To clean the Pinlock lens, remove it from the visor. Use only a soft, damp kain dan sabun lembut. Do not use alcohol-based cleaners, abrasive materials, or strong chemical solvents, as these can damage the anti-fog coating and the silicone seal. Rinse with clean water and allow to air dry.
Cleaning the Visor
Clean the main visor separately using appropriate visor cleaning solutions or mild soap and water. Ensure the visor is completely dry before re-installing the Pinlock lens.
Penyelesaian Masalah
Fogging Persists
- Periksa Segel: Ensure the Pinlock lens is creating a tight, airtight seal against the main visor. If there are gaps, remove and re-install the lens, flexing the visor more to increase tension on the pins.
- Lensa Bersih: Dirt or oils on the lens surface can impair its anti-fog properties. Clean the lens as per the maintenance instructions.
- Pin Adjustment: Some Pinlock pins are adjustable. If fogging persists, you may need to rotate the pins slightly to increase the tension on the lens, thereby improving the seal.
Goresan atau Kerusakan
- Handle the Pinlock lens with care. Avoid contact with sharp objects or abrasive surfaces.
- If the lens is scratched or damaged, its effectiveness may be reduced, and replacement is recommended.
Spesifikasi
- Merek: Kunci Pin
- Model: DKS 111 (HJ-20M)
- Bahan: Plastik
- Warna: Jernih
- Kesesuaian: HJC HJ-20M face shields (HJC FG-17, HJC IS-17 helmets)
- Fungsi: Anti-fog insert
- Ukuran: Sekitar 11.81 x 3.94 x 3.94 inci
- Berat Barang: Sekitar 1.41 ons
Catatan: Dimensi dan berat bersifat perkiraan dan mungkin sedikit berbeda.
Garansi dan Dukungan
For specific warranty information or technical support regarding your Pinlock HJ-20M lens, please refer to the official Pinlock website or contact your authorized Pinlock dealer. Keep your purchase receipt as proof of purchase.
