1. Pendahuluan
The FLIR MR77 Pinless Moisture Meter is a professional-grade instrument designed for accurate moisture and environmental measurements. This device combines pinless moisture detection with an external pin probe, relative humidity, and temperature sensing capabilities, making it a versatile tool for various applications.
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your FLIR MR77 meter to ensure optimal performance and longevity.
2. Membongkar dan Isi
Carefully unpack all items from the packaging. Verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
Isi Paket:
- FLIR MR77 Moisture Meter
- Temperature/Relative Humidity Sensor (MR01)
- Pin Probe (MR02)
- Baterai 9V
- User Manual (dokumen ini)
Figure 2.1: The FLIR MR77 Pinless Moisture Meter with its integrated sensor and display.
3. Pengaturan dan Pemasangan Baterai
3.1 Pemasangan Baterai
- Temukan kompartemen baterai di bagian belakang meteran.
- Buka penutup ruang baterai.
- Insert the included 9V battery, observing correct polarity.
- Tutup penutup ruang baterai dengan rapat.
3.2 Attaching Sensors
The MR77 comes with an integrated pinless sensor and ports for external sensors.
- Temperature/Relative Humidity Sensor (MR01): This sensor is typically pre-attached to the top of the unit. Ensure it is securely fastened for accurate environmental readings.
- Pin Probe (MR02): For penetrating moisture measurements, connect the pin probe cable to the designated port on the side of the MR77.
Figure 3.1: The external temperature and relative humidity sensor (MR01).
Figure 3.2: The pin probe (MR02) for penetrating moisture measurements.
4. Petunjuk Pengoperasian
4.1 Menghidupkan/Mematikan
Tekan tombol Kekuatan button (usually located at the bottom of the device) to turn the meter on or off.
4.2 Tampilan Lebihview
Figure 4.1: Close-up of the MR77 display showing various readings.
The backlit LCD displays moisture readings, relative humidity, air temperature, dew point, and other relevant data. Icons indicate measurement mode, battery status, and other functions.
4.3 Mode Pengukuran
The FLIR MR77 offers multiple measurement capabilities:
- Pinless Moisture: For non-invasive moisture detection up to 0.75 inches (19 mm) deep. Place the back of the meter flat against the surface to be measured.
- Pin Moisture: Use the external pin probe for direct contact measurements in materials like wood or drywall. Insert the pins into the material.
- Kelembaban Relatif (RH): Measures the percentage of moisture in the air using the integrated or external RH sensor.
- Suhu udara: Mengukur suhu udara sekitar.
- Titik Embun: Calculates the dew point temperature based on RH and air temperature.
- Non-Contact IR Thermometer: Use the IR button and laser pointer to measure surface temperatures.
Figure 4.2: Performing a pinless moisture measurement with the FLIR MR77.
Figure 4.3: Using the integrated IR thermometer with laser targeting.
4.4 Material Group Selection
The MR77 allows selection of different material groups for more accurate moisture readings. Refer to the "Material Group Reference" table in the Specifications section for details on specific materials.
Figure 4.4: The display indicating the selected material group (M09) and Relative Humidity (RH).
4.5 Penyimpanan dan Pengambilan Data
Gunakan TOKO / INGAT button to save and retrieve measurement data. Consult the full user manual for detailed instructions on data logging and management.
4.6 Meter Link Smartphone App
The FLIR MR77 can connect to a smartphone app via Bluetooth for enhanced data monitoring, comparison, and reporting. Download the Meter Link app from your device's app store.
Figure 4.5: The Meter Link smartphone app interface for data monitoring and comparison.
5. Pemeliharaan
5.1 Pembersihan
Wipe the meter's exterior with a damp cloth. Do not use abrasive cleaners or solvents. Keep the sensor areas clean and free of debris.
5.2 Penggantian Sensor
The temperature/relative humidity sensor (MR01) is field-replaceable. If readings become inaccurate or the sensor is damaged, replace it with an authorized FLIR replacement part. Refer to the full user manual for detailed replacement instructions.
5.3 Penyimpanan
Store the FLIR MR77 in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.
6. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Meter tidak menyala. | Baterai mati atau tidak terpasang dengan benar. | Periksa polaritas baterai, ganti baterai. |
| Pembacaan kelembapan yang tidak akurat. | Incorrect material group selected; sensor dirty or damaged; external interference. | Verify material group; clean or replace sensor; move away from strong electromagnetic fields. |
| Inaccurate RH/Temperature readings. | Sensor dirty or damaged. | Clean or replace the MR01 sensor. |
| Masalah konektivitas Bluetooth. | Meter not in pairing mode; app issues; distance from device. | Ensure meter Bluetooth is active; restart app/meter; reduce distance. |
For further assistance, refer to the official FLIR MR77 User Manual (PDF) or contact FLIR customer support.
7. Spesifikasi
Spesifikasi Umum:
- Model: MR77
- Ukuran: 6.3 x 3 x 8 inci (16 x 7.6 x 20.3 cm)
- Berat: 1.54 pon (0.7 kilogram)
- Baterai: 1 Lithium Ion battery (included), 9V Alkaline recommended for replacement.
- Daya Tahan Baterai: Approximately 100 hours (without worklight)
- Pabrikan: Sistem FLIR
- Tipe Pemasangan: Meja
- Resistensi Jatuh: Withstands a drop of 2 meters.
Spesifikasi Pengukuran:
- Pinless Moisture Depth (Max): 0.75 inci (19 mm)
- Pin Moisture Range: 7–30% (100% reference only)
- Pin Moisture Accuracy: ±1.5% MC (Moisture Content)
- Pinless Moisture Range: 0–99.9 (relative measurement)
- Rentang Kelembaban Relatif: 10–90%
- Akurasi Kelembaban Relatif: ±2.5% Kelembapan Udara Rendah
- Vapor Pressure Range: 0.0–20.0 kPa
- Vapor Pressure Accuracy: Greater of ±2.0 or 0.2 kPa
- Kisaran Suhu Titik Embun: -22°F hingga 122°F (-30°C hingga 50°C)
Figure 7.1: Detailed specifications for the FLIR MR77.
Material Group Reference:
Figure 7.2: Reference table for selecting appropriate material groups for moisture measurements.
This table provides common names of timbers and other materials, along with their corresponding material group numbers (e.g., Group 1-8 for timbers, Group 9 for plywood, drywall, and oriented strand board, Group 10 for brick, cement screed, and concrete, Group 11 for cement mortar, anhydrite screed, lime mortar, and plaster). Groups 10 and 11 are not specified for accuracy and should be used for reference only.
8. Informasi Garansi
The FLIR MR77 Pinless Moisture Meter is covered by a Garansi Seumur Hidup Terbatas. For specific terms and conditions, including details on coverage and how to make a warranty claim, please refer to the official warranty documentation provided with your product or visit the FLIR weblokasi.
9. Dukungan dan Sumber Daya Tambahan
For further information, technical support, or to access the complete user manual, please use the resources below:
- Unduh Panduan Pengguna Lengkap (PDF)
- Visit the Official FLIR Store on Amazon
- Contact FLIR Customer Support (refer to FLIR's official web(Lihat situs web untuk detail kontak).