1. Produk Lebihview
The Vigor VBH 400-E Maxi Rotary Hammer Drill is a powerful 1300W tool designed for heavy-duty drilling and chiseling tasks in concrete, masonry, and wood. It features a robust motor, variable speed control, and a high impact energy for efficient work. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
This image displays the Vigor VBH 400-E Maxi Rotary Hammer Drill, featuring its robust yellow and silver housing, black auxiliary handle, and SDS-plus chuck. Below the tool, various accessories are laid out, including several SDS drill bits of different sizes, two chisels (one pointed, one flat), and a small container of lubricant.
2. Petunjuk Keselamatan Penting
Selalu ikuti tindakan pencegahan keselamatan dasar saat menggunakan peralatan listrik untuk mengurangi risiko kebakaran, sengatan listrik, dan cedera diri.
- Keselamatan Area Kerja: Jaga agar area kerja Anda tetap bersih dan terang. Jangan mengoperasikan perkakas listrik di lingkungan yang mudah meledak, seperti di dekat cairan, gas, atau debu yang mudah terbakar.
- Keamanan Listrik: Steker perkakas listrik harus sesuai dengan stopkontak. Jangan pernah memodifikasi steker. Hindari kontak tubuh dengan permukaan yang diarde atau diarde. Jangan biarkan perkakas listrik terkena hujan atau kondisi basah.
- Keamanan Pribadi: Always wear eye protection, hearing protection, and suitable work gloves. Dress properly; avoid loose clothing or jewelry. Secure long hair.
- Penggunaan dan Perawatan Alat: Do not force the power tool. Use the correct tool for your application. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
- Pencegahan Suap: Always maintain a firm grip on the tool. Be prepared for sudden reactions when the drill bit binds.
- Ekstraksi Debu: When drilling, especially in concrete, significant dust is generated. Use appropriate dust extraction systems and wear a dust mask.
3. Komponen dan Fitur
Familiarize yourself with the main parts of your Vigor VBH 400-E Rotary Hammer Drill:
- SDS-plus Chuck: Untuk memasukkan mata bor dan pahat dengan cepat dan aman.
- Sakelar Pemilih Mode: Memungkinkan pemilihan antara mode pengeboran, pengeboran palu, dan pemahatan.
- Pegangan Utama: Didesain secara ergonomis untuk genggaman dan kontrol yang nyaman.
- Pegangan Bantu: Provides additional stability and control during operation.
- Pemberhentian Kedalaman: Untuk kontrol kedalaman pengeboran yang presisi.
- Sakelar Pemicu: Mengaktifkan alat tersebut.
- Tombol Pengunci: Untuk pengoperasian terus-menerus.
- Kontrol Kecepatan Variabel: Integrated into the trigger for adjusting drilling speed.
4. Pengaturan
4.1 Memasang Pegangan Bantu
Loosen the auxiliary handle by twisting it counter-clockwise. Slide it over the chuck and position it to your desired angle for optimal control and comfort. Tighten by twisting clockwise until secure.
4.2 Inserting Drill Bits/Chisels
- Clean the shank of the SDS-plus bit and apply a small amount of the included grease to the end.
- Tarik kembali selongsong chuck.
- Masukkan mata bor ke dalam chuck sampai terdengar bunyi klik pada tempatnya.
- Release the chuck sleeve. Pull on the bit to ensure it is securely locked. The bit should have a slight axial play; this is normal for SDS-plus systems.
4.3 Sambungan Daya
Ensure the tool's voltage rating matches your power supply (230V). Plug the power cord into a grounded electrical outlet. Always use a residual current device (RCD) for added safety.
5. Petunjuk Pengoperasian
5.1 Memilih Mode Operasi
Rotate the mode selector switch to choose the desired function:
- Pengeboran (Hanya Putar): For drilling in wood, metal, or plastic. No hammering action.
- Pengeboran Palu (Rotary dengan Palu): For drilling in concrete, brick, and stone. Both rotation and hammering action are active.
- Memahat (Hanya Palu): For chiseling, breaking, or demolition work. Rotation is disengaged, only hammering action.
5.2 Memulai dan Menghentikan
To start the tool, press the trigger switch. To stop, release the trigger switch. For continuous operation, press the trigger and then press the lock-on button. To release, press the trigger again.
5.3 Kontrol Kecepatan
The tool features variable speed control. The drilling/hammering speed can be adjusted by the pressure applied to the trigger switch. For precise starting, begin with low speed and gradually increase.
5.4 Working with the Tool
Apply moderate pressure to the tool. Do not force it, as excessive pressure can reduce efficiency and damage the tool or bit. Allow the tool's hammering action to do the work. For optimal performance and tool longevity, allow the tool to rest after prolonged continuous use, especially during heavy-duty applications.
6. Pemeliharaan dan Perawatan
6.1 Pembersihan
After each use, clean the tool's ventilation slots and housing with a soft brush or compressed air. Do not use water or chemical cleaning agents. Regularly clean the chuck to prevent dust and debris buildup.
6.2 Pelumasan
Apply a small amount of the provided grease to the SDS-plus bit shank before insertion to ensure smooth operation and reduce wear on the chuck.
6.3 Penyimpanan
Store the tool in a dry, secure place, out of reach of children. Protect it from direct sunlight, extreme temperatures, and moisture. It is recommended to store the tool in its original carrying case.
7. Penyelesaian masalah
Bagian ini membahas masalah umum yang mungkin Anda temui dengan bor palu putar Anda.
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Alat tidak dimulai | No power supply; Faulty power cord/plug; Trigger switch malfunction | Check power outlet and connections; Inspect power cord for damage; Contact qualified service personnel |
| Reduced hammering action | Incorrect mode selected; Worn carbon brushes; Insufficient lubrication | Ensure hammer drilling/chiseling mode is selected; Have carbon brushes checked/replaced; Apply grease to bit shank |
| Bit tidak terkunci di chuck | Chuck sleeve not pulled back sufficiently; Debris in chuck; Damaged bit shank | Pull chuck sleeve fully back; Clean chuck thoroughly; Use a clean, undamaged bit |
| Alat terlalu panas | Penggunaan berat dalam jangka waktu lama; Lubang ventilasi tersumbat | Allow tool to cool down; Clean ventilation slots; Avoid excessive continuous load |
8. Spesifikasi Teknis
| Spesifikasi | Nilai |
|---|---|
| Model | VBH 400-E |
| Masukan Daya | 1300 Watt |
| Jil.tage | 230 Volt |
| Energi Dampak | 2 - 8 Joules |
| Kecepatan Tanpa Beban | 0 - 500 putaran/menit |
| Tingkat dampak | 1500 - 3600 denyut per menit |
| Max. Drilling Diameter (Concrete) | 40 mm |
| Berat | 7 kg (sekitar 15.43 pon) |
| Dimensi (P x L x T) | Ukuran 47x40.5x15 cm |
9. Garansi dan Dukungan
Your Vigor VBH 400-E Maxi Rotary Hammer Drill is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact your authorized Vigor service center or the retailer from whom you purchased the product. Always provide the model number (VBH 400-E) and serial number (if applicable) when seeking support.
Simpan tanda terima pembelian Anda sebagai bukti pembelian untuk tujuan garansi.
