Fluke 106 Palm-sized Digital Multimeter User Manual

1. Pendahuluan

This manual provides essential instructions for the safe and effective use of your Fluke 106 Palm-sized Digital Multimeter. The Fluke 106 is a compact, reliable tool designed for basic electrical measurements in various applications. Please read this manual thoroughly before operating the device.

2. Informasi Keselamatan

Always adhere to safety precautions when using any electrical testing equipment. Failure to do so may result in injury or damage to the multimeter or equipment under test.

• Rated for CAT III 600V: This multimeter is designed for measurements in distribution boards, circuit breakers, wiring, including cables, bus-bars, junction boxes, switches, socket outlets in the fixed installation, and equipment for industrial use and some other equipment, e.g. stationary motors with permanent connection to fixed installation.
• Jangan gunakan multimeter jika terlihat rusak atau jika kabel uji rusak.
• Pastikan fungsi dan rentang yang tepat dipilih sebelum melakukan pengukuran.
• Always connect the common (COM) test lead before connecting the live test lead. Disconnect the live test lead first.
• Jangan gunakan lebih dari volume terukurtage, as marked on the multimeter, between terminals or between any terminal and earth ground.
• Gunakan hati-hati dengan voltagTegangan di atas 30V AC RMS, 42V puncak, atau 60V DC. Tegangan-tegangan initagmenimbulkan bahaya sengatan listrik.
• Ganti baterai ketika indikator baterai lemah muncul untuk memastikan pembacaan yang akurat.

3. Apa yang ada di dalam kotak

Upon unpacking your Fluke 106 Digital Multimeter, verify that all items listed below are present and in good condition:

• Multimeter Digital Fluke 106
• TL75 Test Leads (one red, one black)
• 2 baterai AAA (sudah terpasang atau dijual terpisah)
• User Manual (dokumen ini)

4. Produk Lebihview

The Fluke 106 is designed for ease of use with a clear display and intuitive rotary dial. Its compact size makes it convenient for portability.

4.1. Kontrol dan Tampilan

• Menampilkan: Menampilkan hasil pengukuran, satuan, dan indikator fungsi.
• Saklar Putar: Used to select measurement functions (OFF, V~, V-, mV~, mV-, Ω, Continuity, Capacitance, A~, A-).
• Tombol TAHAN: Membekukan pembacaan saat ini pada layar. Tekan lagi untuk melepaskan.
• Terminal Input:
• KOMENTAR: Terminal umum untuk semua pengukuran (kabel uji hitam).
• VΩ: Masukan untuk volumetage, resistance, continuity, and capacitance measurements (red test lead).
• 10A FUSED: Input for current measurements up to 10A (red test lead).

5. Pengaturan

5.1. Pemasangan Baterai

The Fluke 106 requires two AAA batteries. These are typically included and may be pre-installed. If not, or if replacement is needed:

1. Pastikan multimeter dalam keadaan MATI.
2. Cari penutup kompartemen baterai di bagian belakang multimeter.
3. Gunakan obeng untuk melepaskan sekrup yang mengencangkan penutup.
4. Carefully remove the old batteries (if any) and insert two new AAA batteries, observing the correct polarity (+/-).
5. Pasang kembali penutup kompartemen baterai dan kencangkan dengan sekrup.

5.2. Menghubungkan Kabel Uji

Selalu sambungkan kabel uji dengan benar untuk pengukuran yang akurat dan aman.

1. Masukkan kabel tes hitam ke dalam DAPAT terminal (umum).
2. Untuk volumetage, resistance, continuity, and capacitance measurements, insert the red test lead into the VΩ terminal.
3. Untuk pengukuran arus (hingga 10A), masukkan kabel uji merah ke dalam 10A FUSED terminal.

6. Petunjuk Pengoperasian

Sebelum melakukan pengukuran apa pun, pastikan kabel uji terhubung dengan benar dan sakelar putar diatur ke fungsi yang diinginkan.

6.1. Mengukur Tegangan AC/DCtage (V~ / V-)

1. Setel sakelar putar ke V~ untuk AC jilidtage atau V- untuk DC jilidtage.
2. Connect the black test lead to the COM terminal and the red test lead to the VΩ terminal.
3. Sentuhkan probe penguji ke titik-titik di mana Anda ingin mengukur volume.tage. The reading will appear on the display.

6.2. Mengukur Resistansi (Ω)

1. Setel sakelar putar ke Ω.
2. Connect the black test lead to the COM terminal and the red test lead to the VΩ terminal.
3. Pastikan rangkaian atau komponen tersebut telah dimatikan dayanya sebelum mengukur resistansi.
4. Touch the test probes across the component or circuit. The resistance value will be displayed.

6.3. Uji Kontinuitas ())))

1. Setel sakelar putar ke Ω position. The multimeter will automatically detect continuity.
2. Connect the black test lead to the COM terminal and the red test lead to the VΩ terminal.
3. Pastikan sirkuit atau komponen tersebut telah dimatikan alirannya.
4. Touch the test probes across the points to be tested. If continuity exists (low resistance), the multimeter will emit an audible beep.

6.4. Measuring Capacitance (--| |--)

1. Setel sakelar putar ke --| |-- posisi.
2. Connect the black test lead to the COM terminal and the red test lead to the VΩ terminal.
3. Pastikan kapasitor telah dikosongkan muatannya sebelum pengujian.
4. Touch the test probes across the capacitor terminals. The capacitance value will be displayed.

6.5. Measuring AC/DC Current (A~ / A-)

1. PENTING: For current measurements, the multimeter must be connected in series with the circuit.
2. Setel sakelar putar ke A~ for AC current or A- for DC current.
3. Hubungkan kabel tes hitam ke terminal COM dan kabel tes merah ke terminal 10A FUSED terminal.
4. Open the circuit where you want to measure current and insert the multimeter in series.
5. The current reading will appear on the display.

6.6. Data terus

Tekan tombol MEMEGANG button to freeze the current reading on the display. This is useful for taking readings in hard-to-see locations. Press the MEMEGANG Tekan tombol lagi untuk melepaskan pembacaan dan kembali ke pengukuran langsung.

7. Pemeliharaan

7.1. Pembersihan

Untuk membersihkan multimeter, usap casingnya dengan air.amp cloth and a mild detergent. Do not use abrasives or solvents. Ensure the multimeter is completely dry before use.

7.2. Penggantian Baterai

Saat indikator baterai lemah muncul di layar, ganti baterai seperti yang dijelaskan di Bagian 5.1. Menggunakan multimeter dengan baterai lemah dapat mengakibatkan pembacaan yang tidak akurat.

8. Penyelesaian masalah

If your Fluke 106 multimeter is not functioning as expected, consider the following common issues:

• Tidak Ada Tampilan / Tampilan Redup: Periksa daya baterai. Ganti baterai jika perlu.
• Bacaan yang Salah:
• Ensure the correct function is selected on the rotary switch.
• Verify test leads are securely connected to the correct terminals.
• Periksa kabel uji yang rusak.
• Ensure the circuit is de-energized for resistance/continuity/capacitance tests.
• Tidak Ada Bunyi Bip Kontinuitas: Ensure the rotary switch is set to the continuity function (part of Ω range) and the circuit has low resistance.
• Overload Indication (OL): The measured value exceeds the selected range. Switch to a higher range if available, or verify the circuit is within the multimeter's capabilities.

If problems persist, contact Fluke customer support or an authorized service center.

9. Spesifikasi

10. Garansi dan Dukungan

Fluke products are known for their quality and reliability. For warranty information and technical support, please refer to the official Fluke website or contact an authorized Fluke distributor. Ensure your product is sourced from an authorized distributor to guarantee authenticity and valid warranty coverage.

Untuk bantuan lebih lanjut, kunjungi Fluke Store or contact Fluke customer service.