Performance Tool W2977 CAN OBD II Scanner Tool User Manual

Produk Selesaiview

The Performance Tool W2977 CAN OBD II Scanner Tool is an essential diagnostic device for vehicle owners and professionals. It provides a straightforward way to interact with your vehicle's On-Board Diagnostics (OBD-II) system, allowing you to quickly identify and resolve issues indicated by the Check Engine Light.

Fitur Utama:

• Cakupan Kendaraan yang Komprehensif: Compatible with most 1996 and newer American, European, and Asian vehicles.
• Powerful Scan Tool: Reads and erases Diagnostic Trouble Codes (DTCs) to pinpoint engine and emissions system problems.
• Antarmuka yang Ramah Pengguna: Simple operation with clear display and intuitive buttons.
• Emissions Readiness Check: Verifies your vehicle's emissions system status for compliance.
• Full OBD2 Protocol Support: Includes support for the Controller Area Network (CAN) protocol.
• Note: Does not work with 2007 Chevy Silverado models.

Panduan Pengaturan

Follow these steps to set up and begin using your W2977 CAN OBD II Scanner Tool:

1. Temukan Port OBD-II: Port OBD-II biasanya terletak di bawah dasbor di sisi pengemudi kendaraan. Lihat buku panduan pemilik kendaraan Anda jika Anda tidak dapat menemukannya.
2. Hubungkan Pemindai: Plug the scanner's cable connector firmly into the vehicle's OBD-II port. Ensure a secure connection.

Image: Connecting the scanner to the vehicle's OBD-II port.

Image: The W2977 scanner held in hand, connected and ready for use.

Once connected, the scanner will power on automatically. Ensure your vehicle's ignition is in the 'ON' position or the engine is running, as required for proper communication.

Petunjuk Pengoperasian

Membaca Kode Masalah Diagnostik (DTC)

1. With the scanner connected and powered on, the display will show 'C.A.N. OBD2'.


Image: Initial display screen of the scanner.

2. Tekan tombol MEMASUKI button to initiate the scan. The display will show 'SCAN...' as it communicates with the vehicle.
3. Once the scan is complete, the scanner will display 'Menu: 1. DTC'. Press MEMASUKI ke view the Diagnostic Trouble Codes.


Image: Menu option to view DTC.

4. If codes are present, they will be displayed. Use the MENGGULIR button to navigate through multiple codes if applicable.
5. If 'NO CODES' is displayed, it means no active Diagnostic Trouble Codes are currently stored in the vehicle's computer.


Image: Display indicating no trouble codes found.

Erasing Kode Masalah Diagnostik (DTC)

Catatan: Erasing DTCs will turn off the Check Engine Light, but it will not fix the underlying problem. Ensure the issue has been resolved before clearing codes.

1. From the main menu, use the MENGGULIR button to navigate to 'Menu: 2. ERASE'.


Image: Menu option to erase DTCs.

2. Tekan tombol MEMASUKI button. The scanner will ask 'ERASE? YES NO'.
3. Tekan MEMASUKI again to confirm 'YES'. The display will show 'ERASE DONE!' indicating the codes have been cleared.

Pemeliharaan

To ensure the longevity and proper functioning of your Performance Tool W2977 scanner, follow these maintenance guidelines:

• Pembersihan: Lap perangkat dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut abrasif.
• Penyimpanan: Simpan pemindai di lingkungan yang bersih dan kering, jauhkan dari suhu ekstrem dan sinar matahari langsung.
• Perawatan Kabel: Avoid kinking or sharply bending the cable. Store it neatly coiled to prevent damage.

Penyelesaian Masalah

Masalah Umum:

• 'LINK ERROR!' Displayed:
  This indicates a communication issue between the scanner and the vehicle.


Image: Display indicating a communication error.

• Ensure the scanner cable is securely connected to the OBD-II port.
• Verify the vehicle's ignition is in the 'ON' position or the engine is running.
• Check if your vehicle is compatible with OBD-II (most vehicles 1996 and newer).
• Cobalah menghubungkan pemindai ke kendaraan lain yang kompatibel untuk mengesampingkan kemungkinan masalah pada pemindai.
• Pemindai Tidak Menyala:
  
  • The scanner draws power from the vehicle's OBD-II port. Ensure the connection is secure.
  • Check the vehicle's fuse for the OBD-II port (often labeled 'CIGAR' or 'AUX POWER').
• No Codes Found, But Check Engine Light is On:
  
  • Some intermittent issues may not store a permanent code immediately. Drive the vehicle for a short period and re-scan.
  • Ensure the vehicle's ignition is on or engine is running during the scan.

Spesifikasi Teknis

Garansi dan Dukungan

The Performance Tool W2977 CAN OBD II Scanner Tool comes with a 1-year limited warranty. For detailed warranty information and terms, please refer to the official documentation.

For further assistance, troubleshooting, or to access the complete user manual, please refer to the official PDF document:

Unduh Panduan Pengguna (PDF)

Anda juga dapat mengunjungi Performance Tool Store on Amazon untuk informasi produk lebih lanjut dan sumber daya dukungan.