WTW 2AA312

Panduan Pengguna Kit Meter pH WTW pH 3310 ProfiLine dengan Elektroda pH SenTix 41

1. Pendahuluan

This manual provides comprehensive instructions for the proper use, setup, operation, and maintenance of the WTW pH 3310 ProfiLine Meter Kit, which includes the SenTix 41 pH Electrode. The WTW pH 3310 is a robust and reliable instrument designed for accurate pH measurements in various applications, from laboratory to field use. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

2. Produk Lebihview

2.1 Fitur Utama

2.2 Komponen Kit

The WTW pH 3310 ProfiLine Meter Kit includes the following items:

WTW pH 3310 ProfiLine Meter with display showing pH 6.973 and temperature 25.0°C

Gambar 1: The WTW pH 3310 ProfiLine Meter, a handheld device with a large LCD screen showing a pH reading of 6.973 and a temperature of 25.0°C. The keypad features buttons for functions such as 'STO' (Store), 'CAL' (Calibration), 'AR' (AutoRead), 'RCL' (Recall), and 'ENTER', along with navigation arrows. The model name 'pH 3310' is visible on the lower left of the device.

3. Pengaturan

3.1 Pemasangan Baterai

  1. Temukan kompartemen baterai di bagian belakang meteran.
  2. Buka penutup kompartemen.
  3. Insert four (4) AA batteries, ensuring correct polarity as indicated inside the compartment.
  4. Close the battery compartment cover securely to maintain the waterproof seal.

3.2 Sambungan Elektroda

  1. Carefully remove the protective cap from the SenTix 41 pH Electrode.
  2. Connect the electrode cable to the designated port on the WTW pH 3310 meter. Ensure the connection is firm and secure.
  3. Rinse the electrode with distilled water before initial use.

3.3 Penyalaan Awal

Tekan tombol AKTIF/NONAKTIF button to power on the meter. The display will illuminate, and the device will perform a self-test before entering measurement mode.

4. Petunjuk Pengoperasian

4.1 Kalibrasi

Regular calibration is essential for accurate pH measurements. The WTW pH 3310 supports up to 5-point calibration using DIN, NIST, or USA buffer recognition.

  1. Prepare fresh calibration buffer solutions (e.g., pH 4.01, 7.00, 10.00).
  2. Tekan tombol KALI tombol untuk masuk ke mode kalibrasi.
  3. Rinse the electrode with distilled water and immerse it in the first buffer solution.
  4. Wait for the reading to stabilize, then confirm the calibration point as prompted by the meter.
  5. Repeat for subsequent buffer solutions.
  6. The meter will automatically recognize the buffer and store the calibration data.

4.2 Pengukuran

  1. Pastikan alat ukur sudah dikalibrasi.
  2. Rinse the electrode with distilled water and immerse it in the sampsolusi.
  3. Wait for the reading to stabilize on the LCD. The AutoRead (AR) function can assist in determining when the reading is stable.
  4. Record the pH and temperature values displayed.

4.3 Pencatatan Data

The pH 3310 meter offers advanced data logging capabilities:

4.4 Transfer Data ke PC

Untuk mentransfer data yang tersimpan ke komputer:

  1. Connect the WTW pH 3310 meter to a PC using a mini-USB cable.
  2. The meter's waterproof USB interface ensures reliable connection.
  3. Follow the instructions in the accompanying software (if applicable) or the meter's menu to initiate data transfer.

5. Pemeliharaan

5.1 Meter Care

5.2 Electrode Care (SenTix 41 pH Electrode)

6. Penyelesaian masalah

This section addresses common issues you might encounter with your WTW pH 3310 meter. For more detailed troubleshooting, refer to the full product manual or contact customer support.

MasalahKemungkinan PenyebabLarutan
Meter tidak menyala.Baterai mati atau tidak terpasang dengan benar.Periksa polaritas baterai; ganti dengan baterai AA baru.
Unstable pH readings.Dirty or damaged electrode; insufficient sample immersion; air bubbles.Clean electrode; ensure proper immersion; gently stir to remove bubbles; recalibrate.
Calibration fails or is inaccurate.Expired or contaminated buffer solutions; dirty electrode; incorrect buffer recognition setting.Use fresh buffer solutions; clean electrode; check buffer recognition settings in the menu.
Data transfer to PC not working.Loose USB connection; driver issues; incorrect software settings.Ensure USB cable is securely connected; check PC device manager for drivers; consult software manual.

7. Spesifikasi

8. Garansi dan Dukungan

For warranty information, technical support, or service inquiries regarding your WTW pH 3310 ProfiLine Meter Kit, please refer to the documentation provided with your purchase or contact WTW customer service directly. Contact details can typically be found on the manufacturer's official websitus atau pada kemasan produk.

For additional resources and product information, visit the official WTW weblokasi: www.wtw.com