Perkenalan
The Elero RevoLine series offers intelligent drive solutions for various mounting situations. The Roltop M10 tubular drive is designed for roller shutters, awnings, and screens, providing reliable and efficient operation. This manual provides essential information for the safe and effective installation, operation, and maintenance of your Elero Roltop M10 drive.
Figure 1: Elero Roltop M10 Tubular Drive
This image shows the main product, the Elero Roltop M10 tubular drive, a cylindrical device typically installed inside a roller tube for automated operation of blinds or awnings.
Informasi Keselamatan
Harap baca semua petunjuk keselamatan dengan saksama sebelum pemasangan dan pengoperasian. Kegagalan mengikuti petunjuk ini dapat mengakibatkan cedera atau kerusakan pada produk.
- Pemasangan harus dilakukan oleh personel yang berkualifikasi sesuai dengan peraturan kelistrikan setempat.
- Putuskan aliran listrik sebelum melakukan pekerjaan instalasi, perawatan, atau perbaikan apa pun.
- Ensure the drive is correctly sized for the application (e.g., weight of the roller shutter/awning).
- Do not allow children to play with the control devices.
- Jauhkan tangan dan pakaian longgar dari bagian yang bergerak selama pengoperasian.
- The drive is designed for indoor use or protected outdoor environments within the specified temperature range.
Komponen Termasuk
The following components are typically included with your Elero Roltop M10 tubular drive:
- 1x Tubular Drive (Elero Roltop M10)
- 1x Adapter Kit for SW60 Shaft
- 1x 2-meter Plug-in Connection Cable
- (Motor bracket not included)
Spesifikasi
Detailed technical specifications for the Elero Roltop M10 tubular drive:
| Fitur | Spesifikasi |
|---|---|
| Pabrikan | Elero |
| Model | Pesawat M10 |
| Dimensi (Paket) | Ukuran 76.3x11.3x10.3 cm |
| Berat | 2.28 kg |
| Bahan | Alloy steel, aluminum (gold), chrome-plated steel |
| Jenis Daya | Daya listrik |
| Jil.tage | 230 Volt |
| Metode Instalasi | Roller shutter shaft installation |
| Kisaran Suhu | -20 hingga +60 Derajat Celcius |
| Fitur Khusus | Intelligent force measurement, soft brake (up to 20 Nm) |
| Aplikasi | Roller shutters, awnings, screens |
| Shaft Size Compatibility | From diameter = 50 mm (comes with SW60 adapter kit) |
| Torsi Terukur | 10 mil/jam |
| Nilai Kecepatan | 14rpm |
| Nilai Arus | 0.6 Sebuah |
| Konsumsi Daya Terukur | 140W |
| Kelas Perlindungan (IP) | 44 |
| End Switch Range | 40 revolutions |
| Operating Duration (min S2) | 5 menit |
| Diameter Luar | 60 mm |
Figure 2: Technical Data Table for Elero Roltop Drives (M7/23, M10, M12/23, M20, M30, M40, M50)
This image displays a table with various technical specifications for different Elero Roltop drive models, including rated voltage, frequency, torque, speed, current, power consumption, shaft diameter, IP rating, end switch range, operating duration, length, weight, and operating temperature range.
Figure 3: Dimensional Drawing of Elero Roltop Drive
This image provides a technical drawing showing the dimensions of the Elero Roltop drive, including overall length (A), mounting length (B), diameter (Ø45), and dimensions of the connection end (55mm, 14mm, 33mm), indicating the pluggable connection cable.
Pengaturan dan Instalasi
The Elero Roltop M10 drive is designed for installation within a roller shutter shaft. Ensure the shaft diameter is at least 50 mm. The drive comes with an adapter kit for SW60 shafts.
Langkah-langkah Instalasi:
- Persiapan: Ensure power is disconnected. Prepare the roller shutter shaft and ensure it is clean and free of obstructions.
- Pemasangan Adaptor: Attach the appropriate adapters from the SW60 kit to the drive head.
- Penyisipan Drive: Carefully insert the tubular drive into the roller shutter shaft. Ensure it is securely seated and aligned.
- Pengkabelan: Connect the 2-meter plug-in connection cable to the drive. Route the cable safely to the power supply, ensuring it is not pinched or damaged. Parallel wiring is possible.
- Pemasangan: Secure the drive within the shaft assembly. The drive is suitable for both left and right-hand mounting.
- Sambungan Daya: Connect the drive to the main power supply (230 Volts) via a suitable switch or control unit.
Penyesuaian Posisi Akhir:
For Elero RevoLine drives with mechatronic limit switches, the end positions can be set using a mounting cable. The drive features intelligent force measurement and a quiet soft brake (up to 20 Nm).
- Mechatronic End Position Detection: The drive automatically detects terminal positions with a soft stop.
- Adjustable End Positions: Final positions can be set via the mounting cable.
- Perlindungan Beban Berlebih: Features intelligent force measurement and suspension protection (up/down and free, not for RolTop M10-K).
- Discharge at End Position: Discharge can be activated at the end position (not for RolTop M10-K).
Figure 4: End Position Programmability Options
This image displays a table outlining the programmability options for end positions (top and bottom), including "On Stop" (Auf Anschlag) and "Freely Adjustable" (Frei einstellbar) combinations.
Petunjuk Pengoperasian
Once installed and configured, the Elero Roltop M10 drive operates automatically based on the control signals it receives from your switch or automation system.
- Operasi Dasar: Use your wall switch or remote control to move the roller shutter/awning up or down.
- Berhenti Otomatis: The drive will automatically stop at the pre-set upper and lower end positions.
- Intermediate Stops: If your control system supports it, you may be able to program intermediate stop positions.
- Soft Brake: The drive features a quiet soft brake for smooth stopping, especially for models up to 20 Nm.
- Perlindungan Beban Berlebih: The intelligent force measurement system helps protect the drive and the roller shutter/awning from damage due to obstructions.
Pull Force Tables:
Refer to the pull force tables to understand the maximum permissible weight for different roller shutter heights and shaft types.
Figure 5: Pull Force Tables for RevoLine M Drives
This image presents multiple tables detailing the maximum permissible weight (in kg) for a given roller shutter height (1.0m, 1.5m, 2.0m, 2.5m, 3.0m) across various RevoLine M drive models, considering different shaft types (e.g., 65° with 8mm, 11mm, 14mm wall thickness).
Pemeliharaan
The Elero Roltop M10 tubular drive is designed for minimal maintenance. However, regular checks can ensure long-term performance.
- Pembersihan: Keep the area around the drive and the roller shutter/awning free from dust and debris. Do not use abrasive cleaners.
- Pemeriksaan Kabel: Periodically check the connection cable for any signs of wear, damage, or fraying. Replace if necessary.
- Pemeriksaan Penghalang: Ensure the path of the roller shutter/awning is clear of obstructions during operation.
- Inspeksi Profesional: For complex issues or internal components, consult a qualified technician.
Penyelesaian Masalah
If you encounter issues with your Elero Roltop M10 drive, refer to the following common problems and solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Drive does not respond. | No power, faulty wiring, control unit issue. | Check power supply. Verify cable connections. Test control unit. |
| Drive stops prematurely. | Obstruction, incorrect end position setting, motor overload. | Remove obstructions. Re-adjust end positions. Check if the load exceeds specifications. |
| Suara-suara yang tidak biasa selama pengoperasian. | Misalignment, worn components, internal issue. | Check for proper alignment. If noises persist, contact a qualified technician. |
| Roller shutter/awning does not fully open/close. | End positions incorrectly set. | Re-program the end positions using the mounting cable. |
If the problem persists after attempting these solutions, please contact Elero customer support or a certified service technician.
Garansi dan Dukungan
Elero products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Elero websitus atau hubungi distributor lokal Anda.
- Pabrikan: Elero
- Weblokasi: www.elero.com (Silakan periksa wilayahnya) websitus)
- Suku cadang: Information regarding spare parts availability is not directly provided in the product specifications. Please contact Elero support for details.
