1. Pendahuluan
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm designed to provide protection from two hazards in a single unit. It features a 10-year sealed lithium battery backup, eliminating the need for battery replacement throughout the alarm's lifespan. This alarm utilizes intelligent sensor technology to offer a fast response to various fire types, including smoldering and fast-flaming fires, while also detecting carbon monoxide (CO) and reducing nuisance alarms.
Fitur Utama:
- Perlindungan Ganda: Mendeteksi asap dan karbon monoksida.
- Cadangan Baterai Tertutup 10 Tahun: No battery replacement required for the life of the alarm.
- Voice Warning System: Verbally announces "Fire" or "Warning, Carbon Monoxide" to clearly identify the hazard.
- Teknologi Penginderaan Ionisasi: Optimized for detecting fast-flaming fires.
- Fitur Senyap: Untuk sementara, alat ini membisukan alarm yang mengganggu selama kurang lebih 9 menit.
- Dapat saling terhubung: Can connect with up to 24 compatible Kidde devices (18 initiating).
Figure 1: Kidde i12010SCO highlighting its 10-year battery and voice alarm capabilities.
2. Informasi Keselamatan Penting
WARNING: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION AND OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, INJURY, OR DEATH.
- Alarm ini dirancang untuk penggunaan di rumah saja.
- Regularly test the alarm weekly by pressing the test/reset button.
- Jangan mengecat alarm. Cat dapat menyumbat ruang sensor dan mencegah alarm beroperasi dengan baik.
- Jangan memasang di area dengan suhu atau kelembapan ekstrem.
- Pastikan aliran listrik dimatikan pada pemutus sirkuit sebelum pemasangan atau perawatan.
3. Isi Paket
Pastikan bahwa barang-barang berikut termasuk dalam paket Anda:
- Kidde i12010SCO Combination Smoke and Carbon Monoxide Alarm
- Mounting Bracket
- Tali pengaman
- Panduan Instalasi dan Manual Pengguna
Gambar 2: Depan view of the Kidde i12010SCO alarm with its wiring harness.
4. Instalasi
This alarm is designed to be hardwired into a 120V AC circuit. It is recommended that a qualified electrician install this unit.
Langkah-langkah Instalasi:
- Matikan Daya: Before beginning installation, ensure the power to the circuit where the alarm will be installed is turned off at the main fuse or circuit breaker panel.
- Remove Old Alarm (if applicable): If replacing an existing alarm, carefully remove it from its mounting bracket and disconnect the wiring harness.
- Pasang Braket Pemasangan: Secure the new mounting bracket to the electrical box using the provided screws. Ensure the bracket is firmly attached.
- Hubungkan Kabel Harness: Connect the new wiring harness to the household wiring. Match the wire colors: black to black (hot), white to white (neutral), and red to red (interconnect, if applicable). Use wire nuts to secure connections. If not interconnecting, cap the red wire.
- Attach Alarm to Harness: Plug the alarm unit into the wiring harness.
- Mount Alarm: Sejajarkan alarm dengan braket pemasangan dan putar searah jarum jam hingga terkunci dengan aman pada tempatnya.
- Activate Battery Backup: Once the alarm is mounted, remove the battery activation tag (if present) to activate the sealed 10-year lithium battery backup.
- Pulihkan Daya: Nyalakan kembali daya di panel sekering utama atau pemutus sirkuit.
- Uji Alarm: Press and hold the Test/Reset button for a few seconds until the alarm sounds and the voice announcement is heard.
Figure 3: Proper installation of the alarm on a ceiling.
Figure 4: The wiring harness for connecting the alarm to household electrical wiring.
Video 1: Official product video demonstrating the features and benefits of the Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning.
5. Operasi
Voice Warning System:
The alarm provides clear voice announcements to distinguish between smoke and carbon monoxide hazards:
- Smoke Detected: The alarm will sound and announce "Fire! Fire!"
- Karbon Monoksida Terdeteksi: The alarm will sound and announce "Warning, Carbon Monoxide!"
Figure 5: Visual representation of the voice warning system for smoke and carbon monoxide.
Tombol Uji/Reset:
- Pengujian: Press and hold the Test/Reset button to test the alarm's circuitry and voice announcement. The alarm will cycle through its warning sounds and voice messages.
- Mengatur ulang: If the alarm is sounding due to a detected hazard, pressing the Test/Reset button will silence the alarm for a short period. If the hazard persists, the alarm will reactivate.
Fitur Senyap:
The Hush feature temporarily silences the alarm for approximately 9 minutes in case of a nuisance alarm (e.g., cooking smoke). To activate, press the Test/Reset button during an alarm. The alarm will enter Hush mode only if it is in an alarm state. After 9 minutes, the alarm will automatically reset and resume normal operation.
Figure 6: Location of the Test/Hush button on the alarm unit.
Interkoneksi:
This alarm can be interconnected with up to 24 compatible Kidde devices, with a maximum of 18 initiating devices. When one interconnected alarm senses a hazard, all interconnected alarms will sound, providing early warning throughout your home.
Figure 7: The Smart Interconnect feature allows multiple alarms to communicate.
6. Pemeliharaan
Baterai:
The Kidde i12010SCO features a sealed 10-year lithium battery that does not require replacement. The alarm is designed to operate for 10 years from the date of activation. After 10 years, the unit should be replaced.
Membersihkan Alarm Anda:
It is recommended to clean your alarm every six months to prevent dust and debris from interfering with its operation.
- Use a soft brush or a vacuum cleaner with a soft brush attachment to remove dust from the alarm's vents.
- Jangan gunakan air, pembersih, atau pelarut, karena dapat merusak unit.
7. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Alarm berbunyi secara berkala | Low battery (after 10 years) or unit not properly seated. | Replace the entire alarm unit if it's past its 10-year life. Ensure the alarm is twisted securely onto its mounting bracket. |
| Nuisance alarms (false alarms) | Asap masakan, uap, kelembapan tinggi, debu, atau serangga. | Use the Hush feature. Relocate the alarm if it's consistently exposed to nuisance sources. Clean the alarm regularly. |
| Alarm tidak berbunyi selama pengujian | No AC power, battery not activated, or faulty unit. | Check circuit breaker. Ensure battery activation tag is removed. If issues persist, replace the unit. |
8. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Nomor Model | i12010SCO |
| Sumber Daya | Hardwired (120 Volts AC) with 10-Year Sealed Lithium Battery Backup |
| Jenis Sensor | Ionization (Smoke) & Electrochemical (CO) |
| Jenis Alarm | Audible (85 dB at 10 feet) & Voice Warning |
| Suhu Operasional | 40°F (4.4°C) hingga 100°F (37.8°C) |
| Kelembaban Operasional | 10%-85% non-condensing relative humidity (RH) |
| Ukuran | 5.5x1.5x5.5 inci |
| Berat Barang | 12 ons (340 gram) |
| Dapat saling terhubung | Hingga 24 perangkat Kidde (18 sebagai inisiator) |
Figure 8: Dimensions of the Kidde i12010SCO alarm.
9. Garansi dan Dukungan
Informasi Garansi:
Kidde offers a limited warranty for this product. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase for warranty claims.
Dukungan Pelanggan:
For technical assistance, troubleshooting, or warranty inquiries, please contact Kidde Customer Support. Contact information can typically be found on the product packaging or on the official Kidde website. It is recommended to have your product model number (i12010SCO) and date of purchase available when contacting support.
Sumber Daya Daring: For additional information, FAQs, and product registration, visit the official Kidde weblokasi: www.kidde.com
