1. Pendahuluan
This manual provides detailed instructions for the setup, operation, and maintenance of the MIPRO ACT 311B Wireless Radio System, which includes the ACT 311B Diversity Receiver and the ACT-32T Bodypack Transmitter. This system is designed for professional audio applications, offering reliable wireless performance and ease of use.
2. Produk Lebihview
The MIPRO ACT 311B system consists of a single-channel diversity receiver and a compact bodypack transmitter. Key features include Automatic Channel Targeting (ACT) for quick frequency synchronization and robust signal transmission.
Figure 2.1: MIPRO ACT 311B Wireless Radio System. This image displays the complete system, featuring the ACT 311B Diversity Receiver at the bottom and the ACT-32T Bodypack Transmitter positioned above it. Both units are black with green LCD displays. The receiver has two antennas, while the transmitter has one flexible antenna.
Figure 2.2: MIPRO ACT 311B Diversity Receiver. Sebuah close-up view of the ACT 311B Diversity Receiver. It is a black, rack-mountable unit with a front panel featuring a green LCD display, control buttons (SET, ACT, MODE, UP, DOWN), and a power knob. Two detachable antennas are visible on the rear of the unit (shown here extending upwards).
Figure 2.3: MIPRO ACT-32T Bodypack Transmitter. This image shows the ACT-32T Bodypack Transmitter. It is a compact, black plastic unit with a green LCD display showing group and channel information. It features an ON/OFF button, MODE button, SET button, a flexible antenna, and a mini XLR input connector at the top.
3. Petunjuk Penyiapan
3.1. ACT 311B Receiver Setup
- Sambungan Daya: Connect the provided external power supply to the DC input on the rear panel of the ACT 311B receiver. Plug the power supply into an appropriate AC outlet.
- Pemasangan Antena: Attach the two antennas to the ANTENNA connectors on the rear of the receiver. Ensure they are securely fastened and positioned for optimal signal reception.
- Koneksi Keluaran Audio: Connect the receiver's audio output to your mixer, audio interface, or PA system using either the symmetrical XLR output or the unbalanced 6.3mm jack output.
- Nyalakan: Turn the POWER knob clockwise to power on the receiver. The LCD display will illuminate.
3.2. ACT-32T Bodypack Transmitter Setup
- Pemasangan Baterai: Open the battery compartment on the ACT-32T transmitter. Insert two AA batteries, observing the correct polarity (+/-). Close the compartment securely.
- Koneksi Mikrofon/Instrumen: Connect your microphone or instrument cable (with a mini XLR connector) to the input jack on the top of the transmitter.
- Nyalakan: Press and hold the ON/OFF button to power on the transmitter. The LCD display will show channel, gain, and battery status.
4. Petunjuk Pengoperasian
4.1. Automatic Channel Targeting (ACT) Synchronization
The ACT function allows for quick and precise frequency synchronization between the receiver and transmitter.
- Pemilihan Saluran Penerima: On the ACT 311B receiver, use the UP/DOWN buttons to select the desired group (GRP) and channel (CH).
- Activate ACT: Press the ACT button on the receiver. The display will show "ACT" and an infrared signal will be emitted.
- Align Transmitter: Position the ACT-32T transmitter's infrared sensor (usually located near the display) in front of the receiver's ACT window (infrared port).
- Sinkronisasi: The transmitter will automatically synchronize with the receiver's frequency. The transmitter's display will update to show the new group and channel.
4.2. Adjusting Transmitter Settings (ACT-32T)
The ACT-32T allows adjustment of input sensitivity and RF output power.
- Sensitivitas Input: Press the MODE button to cycle through settings. When "GAIN" or "INPUT SENS" is displayed, use the SET button to adjust the input sensitivity for your microphone or instrument. This optimizes the audio level and prevents distortion.
- Daya Keluaran RF: Similarly, navigate to the "RF POWER" setting. Use the SET button to select between 10mW and 50mW output power. Higher power (50mW) provides greater range but consumes more battery.
- Fungsi Bisu: The ACT-32T features a mute switch. Toggle this switch to temporarily silence the audio transmission without powering off the unit. The LCD will indicate the mute status.
5. Pemeliharaan
- Pembersihan: Use a soft, dry cloth to clean the surfaces of the receiver and transmitter. Avoid using liquid cleaners or solvents.
- Penggantian Baterai: Replace the AA batteries in the ACT-32T transmitter when the low battery indicator appears on the LCD. Always use fresh, high-quality batteries.
- Penyimpanan: When not in use for extended periods, remove batteries from the transmitter and store the system in a cool, dry place away from direct sunlight and extreme temperatures.
- Perawatan Antena: Handle antennas carefully. Ensure they are not bent or damaged, as this can affect signal quality.
6. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada output audio dari receiver. |
|
|
| Poor sound quality or dropouts. |
|
|
| Tampilan pemancar kosong. |
|
|
7. Spesifikasi
| Fitur | Detil |
|---|---|
| Tipe Sistem | UHF Wireless Radio System |
| Model | ACT 311B (Receiver), ACT-32T (Bodypack Transmitter) |
| Rentang Frekuensi | Frekuensi 823-832MHz |
| Lebar pita | Frekuensi 24 MHz |
| Stabilitas Frekuensi | ±0.005% (-10~60°C) |
| Kepekaan | 10dBµV, at signal/noise distance > 80dB |
| Rentang Transmisi | 50 Hz~18 kHz |
| Receiver Output Power | 2 selectable settings (microphone and line signal) |
| Receiver Connectors | Symmetrical XLR and Unbalanced 6.3mm Jack |
| Catu Daya Penerima | Pasokan daya eksternal |
| Dimensi Penerima (L x T x D) | Ukuran 210 × 44 × 180 mm |
| Berat Penerima | 0.8 kg |
| Transmitter Synchronization | ACT Sync (Automatic Channel Targeting) |
| Perumahan Pemancar | Sturdy plastic |
| Baterai Pemancar | 2 baterai AA |
| Waktu Operasi Pemancar | Hingga 12 jam (dengan baterai AA) |
| Daya Keluaran Pemancar | 10mW/50mW adjustable |
| Input Pemancar | Mini XLR (for microphone/instrument) |
| Jenis Bahan | Plastik |
| Berat Barang (Total) | 1.6 kg |
8. Garansi dan Dukungan
MIPRO products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official MIPRO website. For technical support, contact your authorized MIPRO dealer or distributor.
Harap simpan bukti pembelian Anda untuk klaim garansi.
