Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Pendahuluan

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Gambar 1: Depan view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Informasi Keselamatan

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Jangan memasang dengan tangan basah.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Pastikan semua sambungan kabel aman dan mematuhi kode kelistrikan setempat.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Hanya untuk penggunaan di dalam ruangan.

3. Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Sekrup Pemasangan (2 buah)
• Mur Kawat (3 unit)
• Instruksi Manual (Dokumen ini)

4. Instalasi

Ikuti langkah-langkah berikut untuk pemasangan yang aman dan benar:

1. Matikan Daya: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage penguji.
2. Hapus Sakelar yang Ada: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Hubungkan Timer: The ST01 timer typically has three wires:
   • Black (Line): Connect to the incoming hot wire from the circuit breaker.
   • Red (Load): Connect to the wire going to the light fixture or appliance.
   • Hijau (Tanah): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Pasang Timer: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Pasang Pelat Dinding: Attach a standard wall plate (not included) over the timer.
6. Pulihkan Daya: Nyalakan kembali daya pada pemutus arus atau kotak sekering.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. Pengaturan Awal dan Pemrograman

Saat pertama kali dinyalakan atau setelah pemadaman listriktage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Tetapkan Waktu Saat Ini:
   • Tekan tombol JAM tombol.
   • Gunakan JAM Dan MENIT buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Tekan JAM lagi untuk menyimpan dan keluar.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Tekan tombol PROG button. The display will show "1 ON".
   • Menggunakan JAM Dan MENIT tombol untuk mengatur waktu ON yang diinginkan untuk program 1.
   • Tekan PROG lagi. Layar akan menampilkan "1 OFF".
   • Menggunakan JAM Dan MENIT buttons to set the desired OFF time for program 1.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Tekan JAM to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Mengoperasikan Timer

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• ON/MATI manual: Tekan tombol PANDUAN tombol untuk beralih antara mode ON, OFF, dan AUTO.
  • DI: The connected device will remain ON, overriding all programs.
  • MATI: The connected device will remain OFF, overriding all programs.
  • MOBIL: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Pemeliharaan

The Intermatic ST01 timer requires minimal maintenance:

• Pembersihan: Wipe the timer's surface with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
• Baterai: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• Inspeksi: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Penyelesaian masalah

9. Spesifikasi

• Model: ST01
• Jenis: 24-Hour In-Wall Digital Timer
• Jil.tage: 120 - 277 Volt
• Ampera: 15 Sebuah
• Kekuatan: 1800W
• Polandia: 1
• Operasi: ON/OFF, Digital, LCD Display
• Pengaturan Waktu: Format 12 jam
• Baterai: CR2 Lithium (for memory backup)
• Suhu Operasional: 32°F hingga 104°F (0°C hingga 40°C)
• Pemasangan: Siram pemasangan
• Dimensi (Keseluruhan): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• Warna: Putih
• Bahan: Logam
• Sertifikasi: CSA bersertifikat
• Kesesuaian: Incandescent, Fluorescent lighting
• Berat Barang: 8 ons (sekitar 227 gram)

10. Garansi dan Dukungan

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Layanan Pelanggan Intermatik:

• Weblokasi: www.intermatic.com
• Refer to the official Intermatic webKunjungi situs web untuk informasi kontak dan detail garansi terbaru.