Buku Panduan Penggunaan Speaker Rak Buku DYNAUDIO Emit M10

Perkenalan

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Informasi Keselamatan Penting

• Bacalah petunjuk ini dengan saksama sebelum mengoperasikan produk.
• Simpan petunjuk ini untuk referensi di masa mendatang.
• Perhatikan semua peringatan pada produk dan petunjuk pengoperasian.
• Ikuti semua instruksi.
• Jangan gunakan peralatan ini di dekat air.
• Bersihkan hanya dengan kain kering.
• Jangan halangi lubang ventilasi apa pun. Pasang sesuai petunjuk produsen.
• Jangan memasang di dekat sumber panas seperti radiator, pemanas, kompor, atau peralatan lainnya (termasuk amppengangkat) yang menghasilkan panas.
• Gunakan hanya perlengkapan/aksesoris yang ditentukan oleh produsen.
• Serahkan semua perbaikan ke teknisi servis yang berkualifikasi. Perbaikan diperlukan jika peralatan mengalami kerusakan, seperti kabel atau steker catu daya rusak, cairan tumpah atau benda jatuh ke dalam peralatan, peralatan terkena hujan atau lembap, tidak beroperasi secara normal, atau terjatuh.

Isi Paket

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Instruksi Manual (dokumen ini)

Jika ada barang yang hilang atau rusak, harap segera hubungi pengecer Anda.

Pengaturan

Penempatan Speaker

Penempatan speaker yang tepat sangat penting untuk kualitas suara yang optimal. Pertimbangkan panduan berikut:

• Jarak dari Dinding: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Tinggi: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereo Triangle: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Masuk: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Gambar: Depan view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Gambar: Depan view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Menghubungkan ke Amppengangkat

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Matikan: Pastikan Anda ampAmplifier dimatikan dan dicabut dari stopkontak sebelum melakukan penyambungan apa pun.
2. Kabel Pembicara: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polaritas: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Koneksi Aman: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Gambar: Belakang view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Mengoperasikan Speaker Anda

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Nyalakan: Colokkan dan nyalakan amppengangkat.
• Kontrol Volume: Mulailah dengan amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Periode Pemakaian: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Pemanggang: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Pemeliharaan

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Pembersihan: Bersihkan kabinet speaker secara teratur dengan kain lembut, kering, dan bebas serat. Untuk noda membandel, gosok perlahan.ampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Pemanggang: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Hindari Sinar Matahari Langsung dan Panas: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Kelembaban: Keep the speakers away from excessive moisture or humidity.
• Perlindungan Pengemudi: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Penyelesaian Masalah

Jika Anda mengalami masalah dengan speaker Anda, lihat masalah dan solusi umum berikut:

• Tidak ada suara:
  • Pastikan amplifier is powered on and connected correctly.
  • Periksa semua sambungan kabel speaker di kedua ujungnya amplifier and the speakers for secure contact and correct polarity.
  • Verifikasi bahwa sumber input yang benar telah dipilih di amppengangkat.
  • Confirm the volume is turned up on the amppengangkat.
• Suara Terdistorsi:
  • Kurangi tingkat volume pada amppenguat. Membebani speaker secara berlebihan dapat menyebabkan distorsi.
  • Periksa sambungan kabel speaker untuk memastikan tidak ada kabel yang kendur atau korsleting.
  • Pastikan amplifier's power output is suitable for the speakers (refer to specifications).
  • Periksa sumber audio untuk mengetahui adanya distorsi.
• Bass Lemah:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Suara Tidak Meratatage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Spesifikasi

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garansi dan Dukungan

Informasi Garansi

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYGaransi ini mencakup cacat material dan pengerjaan dalam penggunaan normal. Harap simpan bukti pembelian Anda untuk klaim garansi.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO weblokasi.

Dukungan Pelanggan

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support websitus untuk bantuan lebih lanjut.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.