Greenworks G40PSH 40V 2-in-1 Cordless Pole Saw and Hedge Trimmer Instruction Manual

1. Pendahuluan

This instruction manual provides essential information for the safe and effective operation, assembly, maintenance, and troubleshooting of your Greenworks G40PSH 40V 2-in-1 Cordless Pole Saw and Hedge Trimmer. Please read this manual thoroughly before first use and keep it for future reference. This tool is designed for pruning branches and trimming hedges in residential outdoor environments.

2. Informasi Keselamatan Umum

PERINGATAN: Baca semua peringatan dan instruksi keselamatan. Kegagalan untuk mengikuti peringatan dan petunjuk dapat mengakibatkan sengatan listrik, kebakaran, dan/atau cedera serius.

• Selalu kenakan alat pelindung diri (APD) yang sesuai, termasuk kacamata pengaman, sarung tangan, pelindung telinga, dan alas kaki yang kokoh.
• Jauhkan anak-anak dan orang sekitar saat mengoperasikan alat.
• Jangan mengoperasikan alat ini dalam kondisi basah atau di dekat cairan atau gas yang mudah terbakar.
• Pastikan area kerja bebas dari rintangan dan puing-puing.
• Periksa alat apakah ada kerusakan sebelum setiap penggunaan. Jangan gunakan jika rusak.
• Remove the battery pack when not in use, before cleaning, or when changing accessories.
• Maintain proper balance and footing at all times. Do not overreach.
• Use only Greenworks 40V battery packs and chargers with this tool.

3. Isi Paket

Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact Greenworks customer service.

• 1x 40V Power Head
• 1x Pole Saw Attachment (20 cm guide bar)
• 1x Hedge Trimmer Attachment (51 cm double-action blade)
• 1x Tali Bahu
• 1x Blade Sheath (for hedge trimmer)
• 1x Chain Cover (for pole saw)
• Manual Instruksi

Gambar 1: Lebihview of the Greenworks G40PSH 2-in-1 Pole Saw and Hedge Trimmer components.

4. Perakitan dan Pengaturan

The Greenworks G40PSH is a modular tool. Follow these steps to assemble the desired configuration.

4.1 Attaching the Pole Extension (if applicable)

1. Align the arrow on the pole extension with the arrow on the power head.
2. Push the pole extension into the power head until it clicks into place.
3. Tighten the coupling knob securely.

4.2 Attaching the Hedge Trimmer Head

1. Ensure the battery is removed from the power head.
2. Align the arrow on the hedge trimmer attachment with the arrow on the power head (or pole extension).
3. Push the attachment into the power head/pole extension until it clicks into place.
4. Tighten the coupling knob securely.

4.3 Attaching the Pole Saw Head

1. Ensure the battery is removed from the power head.
2. Align the arrow on the pole saw attachment with the arrow on the power head (or pole extension).
3. Push the attachment into the power head/pole extension until it clicks into place.
4. Tighten the coupling knob securely.
5. Fill the chain oil reservoir with appropriate bar and chain oil. The pole saw features automatic lubrication.

Figure 2: The Greenworks G40PSH tool in its assembled form.

4.4 Memasang Paket Baterai

1. Pastikan alat dimatikan.
2. Sejajarkan rusuk pada kemasan baterai dengan alur pada port baterai alat.
3. Slide the battery pack into the tool until it locks into place.
4. Untuk melepasnya, tekan tombol pelepas baterai dan tarik baterai keluar.

5. Petunjuk Pengoperasian

Always ensure you have read and understood the safety information before operating the tool.

5.1 Operasi Umum

1. Wear all recommended PPE.
2. Attach the shoulder strap for improved balance and reduced fatigue, adjusting it for comfortable use.
3. To start the tool, press the safety lock-out button and then squeeze the trigger switch.
4. Untuk menghentikan alat, lepaskan sakelar pemicu.

Figure 3: The tool offers an extended reach of up to 2.4 meters for high branches.

5.2 Using the Hedge Trimmer Attachment

1. Adjusting the Pivoting Head: The hedge trimmer head can be adjusted to 7 different positions over a 105-degree range. To adjust, press the pivot release button and rotate the head to the desired angle. Ensure it locks securely before use.
2. Teknik Pemangkasan: Use a sweeping motion, cutting small amounts at a time. For best results, cut the sides of the hedge first, then the top.
3. Kapasitas Pemotongan: The hedge trimmer is designed for branches up to 18 mm in diameter. Do not force the blades through thicker material.

Figure 4: The hedge trimmer features a 7-position pivoting head for optimal cutting angles.

5.3 Using the Pole Saw Attachment

1. Chain Oiling: Ensure the chain oil reservoir is filled before each use. The automatic oiler will lubricate the chain during operation.
2. Pengencangan Rantai: Periodically check chain tension. The tool features a tool-less bar and chain locking system for easy adjustment. A properly tensioned chain should be snug but still allow you to pull it around the guide bar by hand.
3. Teknik Pemotongan: Allow the saw to reach full speed before contacting the branch. Make a small undercut first to prevent pinching, then complete the cut from the top. Support the branch to prevent it from tearing the bark when it falls.
4. Kapasitas Pemotongan: The pole saw is suitable for branches up to 20 cm in diameter.

Figure 5: The pole saw includes an automatic lubrication system for the chain.

Figure 6: Tool-less chain tensioning ensures proper chain tightness for safe operation.

6. Pemeliharaan

Perawatan rutin memastikan kinerja optimal dan memperpanjang umur alat Anda. Selalu lepaskan baterai sebelum melakukan perawatan apa pun.

6.1 Pembersihan

• Setelah setiap penggunaan, bersihkan alat dengan adamp kain. Jangan gunakan bahan kimia keras atau pembersih abrasif.
• Remove any debris, sap, or sawdust from the hedge trimmer blades and pole saw chain/guide bar.
• Pastikan lubang ventilasi bebas dari penghalang.

6.2 Perawatan Mata Pisau Pemangkas Pagar

• Lubricate the blades with light machine oil after each use to prevent rust and ensure smooth operation.
• If blades become dull, they can be sharpened by a qualified service technician.
• Always store the hedge trimmer with the blade sheath in place.

6.3 Pole Saw Chain and Guide Bar Care

• Regularly check the chain for sharpness and damage. A dull chain can cause kickback and poor cutting performance.
• Sharpen the chain as needed or replace it if damaged. Refer to the chain manufacturer's instructions for sharpening.
• Clean the guide bar groove and oil holes to ensure proper lubrication.
• Balikkan bilah pemandu secara berkala untuk memastikan keausan yang merata.
• Always store the pole saw with the chain cover in place.

6.4 Penyimpanan

• Simpan alat di tempat yang kering dan aman, jauhkan dari jangkauan anak-anak.
• Lepaskan unit baterai dari alat sebelum disimpan.
• Simpan paket baterai di tempat yang sejuk dan kering, jauh dari sinar matahari langsung dan suhu ekstrem.

7. Penyelesaian masalah

This section addresses common issues you might encounter. For problems not listed here, contact Greenworks customer service.

8. Spesifikasi

9. Garansi dan Dukungan

9.1 Informasi Garansi

The Greenworks G40PSH 40V 2-in-1 Cordless Pole Saw and Hedge Trimmer comes with a Garansi 3 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage due to misuse, neglect, unauthorized repairs, or normal wear and tear.

9.2 Dukungan Pelanggan

For technical assistance, spare parts, or warranty claims, please contact Greenworks customer service. Refer to the Greenworks official website or your product packaging for the most current contact information in your region.

When contacting support, please have your product model number (G40PSH) and serial number (if applicable) ready.