1. Pendahuluan
The Intermec PM43 is a mid-range industrial label printer designed for reliable performance and ease of use. This printer supports both direct thermal and thermal transfer printing methods, making it versatile for various labeling applications. It features a user-friendly interface, available with either a color touch-screen or universal icons, to simplify operation and reduce training requirements. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PM43 printer.
Gambar 1: Depan view of the Intermec PM43 printer, showing the control panel and media output slot.
2. Pengaturan
2.1 Pembongkaran dan Penempatan
Carefully remove the printer from its packaging. Ensure all packing materials are removed. Place the printer on a stable, flat surface with adequate space around it for ventilation and access to ports and media loading areas.
2.2 Menghubungkan Daya
- Pastikan sakelar daya printer berada pada posisi MATI (O).
- Connect the power cord to the printer's AC inlet.
- Colokkan ujung kabel daya yang lain ke stopkontak yang diarde.
2.3 Connecting to a Host System
The PM43 printer supports USB and Ethernet connectivity.
- Koneksi USB: Hubungkan kabel USB dari port USB printer ke port USB yang tersedia di komputer Anda.
- Koneksi Ethernet: Hubungkan kabel Ethernet dari port Ethernet printer ke router atau sakelar jaringan Anda.
Figure 2: Rear panel of the PM43 printer, illustrating the power inlet, power switch, USB ports, and Ethernet port.
2.4 Memuat Media
The PM43 printer can use various media types, including labels, tags, and continuous media. For thermal transfer printing, a ribbon is also required.
- Open the printer's media cover.
- Letakkan gulungan label pada spindel pemasok media, pastikan label keluar dari bagian bawah gulungan.
- Thread the media through the guides and under the printhead assembly.
- If using thermal transfer, load the ribbon onto the ribbon supply spindle and thread it according to the internal diagrams.
- Tutup penutup media.
Gambar 3: Internal view of the PM43 printer, highlighting the media and ribbon loading mechanisms.
3. Petunjuk Pengoperasian
3.1 Menghidupkan/Mematikan
- To power on, flip the power switch on the rear panel to the ON (I) position. The printer will perform a self-test.
- To power off, flip the power switch to the OFF (O) position.
3.2 Pencetakan Dasar
Once the printer is connected and media is loaded, you can send print jobs from your host system. Ensure the correct printer drivers are installed on your computer.
- Buka dokumen atau aplikasi yang ingin Anda cetak.
- Select the Intermec PM43 printer from the print dialog.
- Adjust print settings (e.g., label size, print density) as needed.
- Mulai proses pencetakan.
3.3 Using the User Interface
The PM43 features either a color touch-screen or a universal-icon interface for direct control and configuration. Navigate through menus to adjust settings such as media calibration, network configuration, and printer status.
4. Pemeliharaan
4.1 Membersihkan Kepala Cetak
Regular cleaning of the printhead is crucial for maintaining print quality and extending the printhead's lifespan. Use a lint-free cloth or a printhead cleaning pen with isopropyl alcohol.
- Power off the printer and disconnect the power cord.
- Buka penutup media.
- Gently wipe the printhead element from the center outwards.
- Allow the printhead to dry completely before closing the cover and powering on the printer.
4.2 Replacing Media and Ribbon
Replace media rolls and thermal transfer ribbons as they run out. Refer to section 2.4 for loading instructions. Always ensure the correct media and ribbon types are used for optimal performance.
5. Penyelesaian masalah
This section addresses common issues you might encounter with your PM43 printer.
5.1 Kualitas Cetak Buruk
- Faded or incomplete print: Clean the printhead (see section 4.1). Ensure the ribbon (if thermal transfer) is correctly loaded and not depleted. Adjust print density settings.
- Smudged print: Verify media type is compatible. Ensure printhead pressure is correctly set.
5.2 Media Jams
- Matikan printer.
- Open the media cover and carefully remove any jammed media.
- Ensure media is loaded correctly and guides are properly adjusted.
- Close the cover and power on.
5.3 Masalah Konektivitas
- Printer not detected: Check all cable connections (USB/Ethernet). Restart the printer and host system. Verify driver installation.
- Masalah jaringan: Confirm network cable is connected. Check network settings on the printer and host system.
6. Spesifikasi
The following table outlines the key technical specifications for the Intermec PM43 printer.
| Fitur | Spesifikasi |
|---|---|
| Nama Model | PM43 |
| Teknologi Percetakan | Direct Thermal / Thermal Transfer |
| cetak Warna | Monokrom (Hitam) |
| Kecepatan Cetak Maksimum | 12 inci per detik |
| Resolusi Cetak Maksimal | 203dpi |
| Jenis Media yang Didukung | Black Mark, Continuous Label, Fanfold, Gap, Label, Linered Label, Linerless, Notch, Roll Fed, Tag |
| Ukuran Media Maksimum | 4 x 6 inci |
| Konektivitas | USB, Ethernet |
| Ingatan | 128MB |
| Metode Kontrol | Touch-screen or Universal-icon interface |
| Dimensi Produk | 25x18x16 inci |
| Berat Barang | 1 pon |
| Sumber Daya | Pasokan AC |
| Language Emulation | DSim, Fingerprint, IPL, XML |
Figure 4: Regulatory and compliance labels found on the Intermec PM43 printer.
7. Informasi Garansi
The Intermec PM43 printer is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec support weblokasi.
8. Dukungan
For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Intermec support website or contact your authorized Intermec dealer. Ensure you have your printer's model number (PM43A01000000201) and serial number available when seeking support.
