Perkenalan
The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.
Informasi Keselamatan
- Baca semua petunjuk dengan seksama sebelum menggunakan perangkat.
- Simpan manual ini untuk referensi di masa mendatang.
- Jangan biarkan perangkat terkena suhu ekstrem, sinar matahari langsung, atau kelembapan tinggi.
- Hindari menjatuhkan atau membenturkan perangkat dengan keras.
- Jangan mencoba membongkar atau memperbaiki perangkat sendiri. Hubungi petugas servis yang berkualifikasi.
- Buang baterai bekas secara bertanggung jawab sesuai dengan peraturan setempat.
Isi Paket
- 1x BRESSER Temeo Quadro Main Display Unit
- 3x Remote Sensors
- 1x Panduan Pengguna (dokumen ini)
Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.
Produk Selesaiview
Unit Tampilan Utama
Gambar: Depan view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.
Gambar: Belakang view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.
- Layar LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
- Tombol SALURAN: Selects which remote sensor's data is displayed or cycles through channels.
- Tombol ALARM: Activates/deactivates temperature/humidity alarms.
- Tombol MAX/MIN: Menampilkan nilai maksimum dan minimum yang tercatat.
- Tombol ATUR: Enters setup mode for time, date, and alarm settings.
- Kompartemen Baterai: Located on the rear, for 3x AAA batteries.
- Dudukan Terintegrasi: For desktop placement.
Sensor Jarak Jauh
Gambar: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.
- Layar LCD: Shows its current temperature and humidity.
- Peralihan Saluran: Allows selection of channel 1, 2, or 3.
- Kompartemen Baterai: For 2x AAA batteries.
- Lubang Pemasangan: Untuk pemasangan di dinding.
Pengaturan
1. Pemasangan Baterai
- For Remote Sensors:
- Open the battery compartment cover on the back of each remote sensor.
- Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
- Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
- Tutup penutup ruang baterai.
- For Main Display Unit:
- Buka penutup kompartemen baterai di bagian belakang unit utama.
- Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
- Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.
2. Pemasangan Sensor
- After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
- Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
- The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
- If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.
3. Penempatan
- Place the main unit indoors in a central location, away from direct sunlight or heat sources.
- Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.
Petunjuk Pengoperasian
ViewSuhu dan Kelembaban
- The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
- The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.
MAX/MIN Records
- Tekan tombol MAKS/MIN button once to display the maximum temperature and humidity recorded since the last reset.
- Tekan tombol MAKS/MIN button a second time to display the minimum temperature and humidity recorded.
- Untuk menghapus catatan MAX/MIN, tekan dan tahan tombol MAKS/MIN button for approximately 3 seconds while MAX or MIN values are displayed.
Pemilihan Unit Suhu (°C/°F)
- On the main unit, press the MENGATUR Tombol untuk beralih antara Celsius (°C) dan Fahrenheit (°F).
Setting Alarms (if applicable)
- Tekan tombol ALARM tombol untuk masuk ke mode pengaturan alarm.
- Gunakan SALURAN Dan MAKS/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
- Tekan ALARM again to confirm settings and activate the alarm. An alarm icon will appear on the display.
- When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.
Pemeliharaan
- Pembersihan: Usap perangkat dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
- Penggantian Baterai: Ganti baterai saat indikator baterai lemah muncul di layar. Selalu ganti semua baterai dalam satu unit secara bersamaan.
- Penyimpanan: Jika menyimpan perangkat untuk jangka waktu yang lama, lepaskan semua baterai untuk mencegah kebocoran.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada tampilan pada unit utama. | Baterai mati atau tidak terpasang dengan benar. | Periksa polaritas baterai dan ganti dengan baterai AAA yang baru. |
| Remote sensor not displaying data on main unit. | Sensor out of range, incorrect channel setting, or dead batteries. |
|
| Pembacaan yang tidak akurat. | Sensor terpapar sinar matahari langsung, sumber panas, atau kelembapan. | Relocate sensors to a more appropriate, sheltered environment. Allow time for readings to stabilize. |
| Hilangnya sinyal secara berkala. | Interference from other electronic devices or physical obstructions. | Move the main unit or sensors away from potential sources of interference (e.g., TVs, microwaves, large metal objects). |
Spesifikasi
| Nomor Model | 7000020CM3000 |
| Merek | Bahasa Indonesia: BRESSER |
| Dimensi Produk (Unit Utama) | 1.02 x 4.13 x 4.72 inci (2.59 x 10.49 x 11.99 cm) |
| Berat Barang (Satuan Utama) | 0.19 Kilogram (sekitar 6.7 ons) |
| Temperature Range (Main Unit) | Internal sensor range not specified, but upper rating is 55 °C. |
| Akurasi Suhu | Suhu ±1 °C |
| kelembaban Rentang | Not specified, but typically 20% to 95% for similar devices. |
| Frekuensi Nirkabel | Frekuensi 433 MHz |
| Sumber Daya Listrik (Unit Utama) | 3x AAA (LR03) batteries |
| Sumber Daya (Sensor Jarak Jauh) | 2x AAA (LR03) batteries per sensor |
| Number of Remote Sensors Supported | 3 |
Jaminan
This BRESSER product comes with a garansi dua tahun against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.
Mendukung
For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER websitus untuk rincian kontak terkini.
Online resources may include FAQs, additional manuals, and contact forms.
