1. Pendahuluan
Thank you for choosing the Einhell TC-LD 25 Laser Distance Meter. This device is designed for quick and accurate measurement of distances up to 25 meters. Its compact design and user-friendly interface make it an ideal tool for various applications in construction, renovation, and DIY projects. Please read this manual carefully before using the device to ensure safe and optimal operation.
Figure 1: Einhell TC-LD 25 Laser Distance Meter
2. Informasi Keselamatan
This device uses a Class II laser. Observe the following safety precautions:
- Jangan menatap langsung ke sinar laser.
- Jangan arahkan sinar laser ke orang atau hewan.
- Hindari paparan mata langsung terhadap sinar laser.
- Jangan membongkar atau memodifikasi perangkat. Perbaikan hanya boleh dilakukan oleh personel yang berwenang.
- Jauhkan perangkat dari jangkauan anak-anak.
The laser diode operates at 635 nm.
3. Produk Lebihview
Familiarize yourself with the components of your Einhell TC-LD 25.
Gambar 2: Depan View (Display, Buttons)
Gambar 3: Kembali View (Battery Compartment)
Gambar 4: Sisi View
Komponen:
- Bukaan Laser: Memancarkan sinar laser untuk pengukuran.
- Tampilan Layar: Shows measurement results, mode, and battery status.
- Measurement Button (ON/MEAS): Menghidupkan perangkat dan memulai pengukuran.
- Function/Unit Button (FUNC/UNIT): Cycles through measurement modes and changes units.
- Tombol Titik Referensi: Switches between front and rear reference points.
- Clear/Off Button (C/OFF): Clears the last measurement or powers off the device.
- Kompartemen Baterai: Terletak di bagian belakang untuk baterai AAA.
4. Pengaturan
4.1 Pemasangan Baterai
The Einhell TC-LD 25 requires two (2) AAA alkaline batteries (not included).
- Buka penutup kompartemen baterai yang terletak di bagian belakang perangkat (lihat Gambar 3).
- Masukkan dua baterai AAA, pastikan polaritas yang benar (+/-).
- Tutup penutup ruang baterai dengan rapat.
Gambar 5: Tempat Baterai
5. Petunjuk Pengoperasian
5.1 Menghidupkan/Mematikan
- Untuk Mengaktifkan: Tekan tombol AKTIF/MEAS button. The laser will activate.
- Mematikan: Tekan dan tahan tombol C/MATI button for a few seconds. The device also features an automatic shutdown function after 3 minutes of inactivity to conserve battery life.
5.2 Pengukuran Jarak Dasar
- Nyalakan perangkat.
- Point the laser beam at the target.
- Tekan tombol AKTIF/MEAS button once. The measured distance will be displayed on the screen.
5.3 Pengukuran Berkelanjutan (Minimum/Maksimum)
This mode allows you to track the minimum and maximum distances as you move the device.
- Tekan tombol FUNC/UNIT button until the continuous measurement icon (often a running person or min/max symbols) appears on the display.
- Move the device slowly towards or away from the target. The display will continuously update the current, minimum, and maximum distances.
- Tekan AKTIF/MEAS to stop continuous measurement and view the final minimum and maximum values.
Figure 6: Continuous Measurement Example
5.4 Mengubah Titik Acuan
The device can measure from its front edge or its rear edge. The default is usually the rear edge.
- Tekan tombol Titik acuan button to toggle between front and rear measurement. An icon on the display will indicate the active reference point.
Figure 7: Measuring from Rear Edge
Figure 8: Measuring from Front Edge
5.5 Mengubah Satuan
The device primarily uses metric units (meters).
- Tekan tombol FUNC/UNIT button repeatedly to cycle through available units (e.g., m, ft, in).
6. Pemeliharaan
- Bersihkan perangkat dengan kain lembut dan basah.amp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
- Regularly check the battery compartment for corrosion. Remove batteries if the device will not be used for an extended period.
- Store the device in its included pouch in a dry, dust-free environment.
Figure 9: Included Carrying Pouch
7. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Perangkat tidak menyala | Low or dead batteries; incorrect battery polarity | Ganti baterai; periksa polaritasnya |
| Pengukuran yang tidak akurat | Unstable surface; obstruction in laser path; extreme temperatures | Ensure stable measurement; clear path; operate within specified temperature range |
| Laser tidak terlihat | Bright ambient light; long distance measurement | Use in lower light conditions; use a target plate for long distances |
8. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Nomor Model | TC-LD 25 (2270075) |
| Rentang Pengukuran | 0.05 m - 25 m |
| Akurasi Pengukuran | +/- 3 mm / m |
| Kelas Laser | Kelas II |
| Dioda Laser | 635nm |
| Penonaktifan Otomatis | 3 menit |
| Baterai | 2 x AAA (Alkali) |
| Dimensi (P x L x T) | Ukuran 11.2x2.5x4 cm |
| Berat | 70 gram |
| Bahan | Styrene Butadiene Acrylonitrile |
| Penilaian Perlindungan Internasional | IP54 (Water resistant) |
9. Garansi dan Dukungan
Einhell products are manufactured with high-quality materials and undergo strict quality control. For any warranty claims or technical support, please refer to your purchase documentation or contact Einhell customer service.
Spare parts availability in the EU is guaranteed for 1 year.
For further information, visit the official Einhell store: Toko Einhell
