Panduan Pengguna Lampu Sorot LED Philips myLiving PONGEE (Model 5058131PN)

1. Pendahuluan

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Informasi Keselamatan

Selalu perhatikan tindakan pencegahan keselamatan berikut untuk mencegah cedera atau kerusakan:

Keamanan Listrik: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
Hanya untuk penggunaan dalam ruangan: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
Tipe Bohlam: Gunakan hanya bohlam LED GU10 seperti yang ditentukan. Jangan melebihi daya maksimum.tage ditunjukkan pada perlengkapan.
Penanganan: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
Pembersihan: Bersihkan perlengkapan tersebut dengan kain lembut dan kering. Jangan gunakan pembersih abrasif atau pelarut.

3. Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:

Philips myLiving PONGEE LED Spot Light fixture (1 unit)
Perangkat keras pemasangan (sekrup, colokan dinding)
Manual instruksi

Catatan: A GU10 LED bulb is tidak termasuk dan harus dibeli secara terpisah.

Packaging box for Philips myLiving PONGEE LED Spot Light

Gambar 2: Kemasan Produk

4. Pengaturan dan Instalasi

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

Siapkan Area Instalasi: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
Putuskan Daya: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
Pasang Basis: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
Hubungkan Perlengkapannya: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
Pasang Bohlam: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
Pasang Badan Perlengkapan: Secure the main body of the spot light to the mounted base.
Pulihkan Daya: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Petunjuk Pengoperasian

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

Menyalakan/Mematikan: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
Menyesuaikan Arah Cahaya: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Pemeliharaan

Pembersihan: Pastikan aliran listrik dimatikan dan perlengkapan sudah dingin sebelum dibersihkan. Lap bagian luar dengan kain lembut, kering, dan bebas serat. Jangan gunakan cairan pembersih, aerosol, atau bahan abrasif.
Penggantian Bohlam:
1. Matikan pasokan listrik pada pemutus arus.
2. Allow the bulb to cool completely.
3. Putarlah bohlam GU10 lama secara perlahan berlawanan arah jarum jam untuk melepaskannya dari soket.
4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
5. Mengembalikan daya.

7. Penyelesaian masalah

Masalah	Kemungkinan Penyebab	Larutan
Lampu tidak menyala.	Tidak ada catu daya. Lampu rusak atau tidak terpasang dengan benar. Sambungan kabel longgar.	Periksa pemutus arus atau sekring. Pastikan sakelar dinding dalam posisi ON. Ganti bohlam dengan bohlam LED GU10 yang baru. Konsultasikan dengan teknisi listrik yang berkualifikasi untuk memeriksa sambungan kabel.
Cahaya berkedip.	Sambungan bohlam longgar. Sakelar peredup tidak kompatibel (jika ada). Bohlam rusak.	Ensure the bulb is securely twisted into the socket. Jika menggunakan sakelar peredup, pastikan sakelar tersebut kompatibel dengan bohlam LED. Ganti bohlam.

8. Spesifikasi

Merek: Pencahayaan Philips
Nomor Model: 5058131PN
Dimensi Produk (P x L x T): Ukuran 10x13.8x8.2 cm
Berat Barang: 345 gram
Bahan: Logam
Warna: Putih
Gaya: Modern
Jenis Sumber Cahaya: DIPIMPIN
Bulb Socket Type: Lampu GU10
Jumlah Umbi: 1 (bulb not included)
Masukan Voltage: 220-240 Volts
Sumber Daya: Electrical cable (wired)
Tipe Instalasi: Surface Mount (Ceiling/Wall)
Peringkat IP: IP20 (hanya penggunaan dalam ruangan)
Fitur Khusus: Energy-efficient, Swivel head
Kegunaan Khusus: Home, Bedroom, Living Room

9. Garansi dan Dukungan

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting websitus. Anda juga dapat menghubungi pengecer Anda untuk mendapatkan bantuan.

Simpan bukti pembelian Anda untuk klaim garansi apa pun.

Philips Lighting 5058131PN