1. Pendahuluan
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Petunjuk Keselamatan Umum
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Keselamatan Area Kerja: Jaga agar area kerja tetap bersih dan terang. Area yang berantakan atau gelap dapat meningkatkan risiko kecelakaan. Jangan mengoperasikan peralatan listrik di lingkungan yang mudah meledak, seperti di dekat cairan, gas, atau debu yang mudah terbakar.
- Keamanan Listrik: Hindari kontak tubuh dengan permukaan yang dibumikan atau ditanahkan seperti pipa, radiator, kompor, dan lemari es. Risiko sengatan listrik meningkat jika tubuh Anda dibumikan atau ditanahkan.
- Keamanan Pribadi: Selalu gunakan pelindung mata. Gunakan kacamata pengaman, kacamata pelindung, atau pelindung wajah. Gunakan pelindung telinga saat mengoperasikan alat dalam waktu lama. Berpakaianlah dengan benar; jangan mengenakan pakaian longgar atau perhiasan. Jauhkan rambut, pakaian, dan sarung tangan Anda dari bagian yang bergerak.
- Penggunaan dan Perawatan Alat: Jangan memaksakan penggunaan alat listrik. Gunakan alat listrik yang tepat untuk aplikasi Anda. Alat tersebut akan bekerja lebih baik dan lebih aman pada kecepatan yang dirancang untuknya. Lepaskan baterai dari alat listrik sebelum melakukan penyesuaian apa pun, mengganti aksesori, atau menyimpan alat listrik.
- Penggunaan dan Perawatan Baterai: Isi ulang hanya dengan pengisi daya yang ditentukan oleh pabrikan. Pengisi daya yang sesuai untuk satu jenis baterai dapat menimbulkan risiko kebakaran saat digunakan dengan baterai lain. Gunakan perkakas listrik hanya dengan paket baterai yang dirancang khusus.
3. Produk Lebihview dan Fitur
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Output Torsi Tinggi: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Kontrol Kecepatan Variabel: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Pencahayaan LED Terintegrasi: Three power LEDs provide optimal illumination of the work area.
- Desain Ergonomis: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Konstruksi Tahan Lama: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Klip sabuk: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Pengaturan
4.1 Pemasangan Baterai (Baterai dan Pengisi Daya Dijual Terpisah)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- Untuk melepas baterai, tekan tombol pelepas di sisi-sisi kemasan baterai dan geser keluar.
4.2 Penyisipan dan Pelepasan Bit
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Petunjuk Pengoperasian
5.1 Menghidupkan/Mematikan dan Kontrol Kecepatan
- Untuk memulai: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Penyesuaian Kecepatan: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Untuk Berhenti: Lepaskan sakelar ON/OFF.
5.2 Arah Rotasi
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Forward Rotation (Screwing In): Push the selector switch to the left.
- Reverse Rotation (Screwing Out): Push the selector switch to the right.
- Posisi Kunci: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Pemeliharaan
Perawatan rutin memastikan umur pakai dan kinerja optimal dari impact driver Anda.
- Pembersihan: After each use, clean the tool housing with a soft, damp Gunakan kain. Jangan gunakan bahan kimia keras atau pembersih abrasif. Pastikan lubang ventilasi bebas dari debu dan kotoran.
- Penyimpanan: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Inspeksi: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Alat tidak mulai. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Daya atau kinerja berkurang. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Mata bor tidak terpasang dengan aman. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Spesifikasi
| Fitur | Detil |
|---|---|
| Merek | Di neraka |
| Nomor Model | TE-CI 18/1 Li Solo (4510034) |
| Sumber Daya | Battery Powered (18V Power X-Change) |
| Kecepatan Rotasi Maksimum | 2300 putaran/menit |
| Torsi Maksimum | 140 Newton Meter |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Jil.tage | 18 Volt |
| Berat Barang | 1.18 Kilogram (2.58 pon) |
| Dimensi Produk | 7.8"P x 3.03"L x 6.65"T |
| Bahan | Rubber, Aluminium |
| Komponen yang Termasuk | Akku-Schlagschrauber (Impact Driver Body Only) |
| Baterai Termasuk? | TIDAK |
| Baterai Diperlukan? | Yes (18V Lithium Ion) |
9. Garansi dan Dukungan
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell weblokasi.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
