1. Pendahuluan
This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 CANDY-X2B Class D 2-Channel AmpPenguat suara. Harap baca manual ini dengan saksama sebelum mencoba pemasangan atau pengoperasian untuk memastikan penggunaan yang benar dan untuk mencegah kerusakan pada unit atau sistem audio kendaraan Anda. Simpan manual ini untuk referensi di masa mendatang.
2. Informasi Keselamatan
- Selalu lepaskan terminal negatif baterai kendaraan sebelum memulai pekerjaan kelistrikan apa pun.
- Pastikan semua kabel terpasang dan terikat dengan benar untuk mencegah terjepit atau rusak.
- Gunakan kabel pengukur yang sesuai untuk sambungan daya, ground, dan speaker seperti yang ditentukan di bagian instalasi.
- Instal ampTempatkan pengangkat di lokasi yang memungkinkan ventilasi memadai untuk mencegah panas berlebih.
- Hindari menginstal amppenguat suara di area yang terpapar kelembapan atau getaran berlebihan.
- Jika Anda ragu tentang bagian mana pun dari proses pemasangan, konsultasikan dengan pemasang audio mobil profesional.
3. Isi Paket
Verifikasi bahwa semua item ada dalam paket:
- DS18 CANDY-X2B Amppengangkat
- Perlengkapan Pemasangan (sekrup, ring)
- Wiring Harness (for high-level input)
- Hex Keys (for terminal screws)
- Instruksi Manual (dokumen ini)
Image: Included accessories for the DS18 CANDY-X2B amplifier, showing the wiring harness, mounting screws, and hex keys.
4. Produk Lebihview
The DS18 CANDY-X2B is a compact Class D 2-channel amplifier designed to deliver significant power output in a small footprint. Its efficient design allows for installation in tight spaces while providing ample power for your car audio system.
Fitur Utama:
- Desain Mini yang Ringkas: Measuring approximately 7.18" x 5" x 1.77", this amplifier can be installed in various locations within your vehicle.
- Output Daya Tinggi: Delivers up to 800 Watts Max power at 1-Ohm, with RMS ratings of 2x120W at 4-Ohm, 2x200W at 2-Ohm, and 350W at 4-Ohm Bridge.
- Jangkauan Aplikasi Luas: Supports speaker impedances from 2 to 8 ohms, offering flexibility for various speaker configurations.
- Hemat Daya: Class D topology ensures high efficiency, drawing minimal power from the vehicle's battery while maximizing output.
- OEM-Ready: Features high-level inputs for seamless integration with factory audio systems.
Image: The DS18 CANDY-X2B amppengangkat, pertunjukanasing its compact form factor and key power specifications.
5. Pengaturan dan Instalasi
Pemasangan yang tepat sangat penting untuk kinerja optimal dan umur pakai yang lebih lama. amppenguat. Ikuti langkah-langkah ini dengan cermat.
5.1 Lokasi Pemasangan
Choose a mounting location that is dry, well-ventilated, and protected from direct sunlight or excessive heat. Ensure there is enough space around the amplifier for air circulation. The compact size of the CANDY-X2B allows for flexible placement options.
5.2 Koneksi Kabel
Refer to the diagrams below for proper wiring of power, ground, remote, input, and speaker outputs.
Koneksi Daya dan Ground:
- GND (Tanah): Connect this terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid connection for optimal performance and safety.
- REM (Pengaktifan Jarak Jauh): Connect this to the remote output of your head unit. This signal turns the amplifier on and off with your audio system.
- +12V (Daya): Connect this terminal directly to the positive terminal of your vehicle's battery. An inline fuse (not supplied, typically 25A for this model) should be installed within 18 inches of the battery.
Koneksi Output Speaker:
Connect your speakers to the LEFT and RIGHT speaker output terminals. For bridged mode operation, refer to the diagram and connect to the designated BRIDGE terminals. Ensure correct polarity (+ to + and - to -).
Image: Rear panel connections of the DS18 CANDY-X2B amplifier, detailing the power, ground, remote, fuse, and speaker output terminals.
Koneksi Input:
The CANDY-X2B supports both Low-Level (RCA) and High-Level inputs.
- Input Level Rendah (RCA): Hubungkan kabel RCA dari pra-unit kepala Andaamp keluaran ke amplifier's INPUT L and R RCA jacks.
- Masukan Tingkat Tinggi: If your head unit does not have RCA outputs, use the supplied high-level input harness. Connect the speaker wires from your head unit to the corresponding wires on the harness, then plug the harness into the amplifier's HIGH INPUT port.
Image: Front panel connections and controls of the DS18 CANDY-X2B amplifier, illustrating low-level RCA inputs, high-level input, and various audio adjustment knobs.
6. Petunjuk Pengoperasian
Suatu ketika amplifier is installed, adjust the settings for optimal audio performance.
6.1 Panel Kontrol Selesaiview
The front panel of the CANDY-X2B features several controls for fine-tuning your audio output:
- PENINGKATAN BASS: Adjusts the bass level enhancement (0dB to +12dB). Use sparingly to avoid distortion.
- FREQ (Frekuensi): Selects the crossover frequency for the Low Pass Filter (LPF) or High Pass Filter (HPF).
- X-OVER (Saklar Crossover): Selects between FULL (full range), LPF (Low Pass Filter), or HPF (High Pass Filter) modes.
- MENDAPATKAN: cocok dengan ampSesuaikan sensitivitas input amplifier dengan level output head unit Anda. Mulailah dengan gain minimum dan tingkatkan secara perlahan hingga volume yang diinginkan tercapai tanpa distorsi.
Gambar: Detail view dari amplifier's control panel, highlighting the Bass Boost, Frequency, Crossover, and Gain adjustment knobs.
6.2 Initial Setup and Tuning
- Setel semua amplifier controls (Gain, Bass Boost) to their minimum positions.
- Atur volume head unit Anda sekitar 75% dari volume maksimumnya.
- Perlahan tingkatkan amplifier's GAIN control until you hear slight distortion, then back off slightly.
- Adjust the X-OVER switch and FREQ knob according to your speaker type:
- For full-range speakers, set X-OVER to PENUH.
- For subwoofers, set X-OVER to LPF and adjust FREQ to the desired low-pass cutoff (e.g., 80Hz-120Hz).
- For component speakers or tweeters, set X-OVER to HPF and adjust FREQ to the desired high-pass cutoff (e.g., 80Hz-120Hz).
- Use the BASS BOOST control sparingly to enhance bass if desired, ensuring no distortion occurs.
7. Pemeliharaan
The DS18 CANDY-X2B ampPenguat sinyal ini membutuhkan perawatan minimal untuk memastikan kinerja jangka panjang.
- Pembersihan: Bersihkan secara berkala ampBersihkan bagian luar pengangkat dengan kain lembut dan kering. Jangan gunakan bahan kimia keras atau pembersih abrasif.
- Koneksi: Regularly check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Ventilasi: Pastikan bahwa ampSirip pendingin amplifier bebas dari debu dan kotoran untuk menjaga pembuangan panas yang optimal.
8. Penyelesaian masalah
Jika Anda mengalami masalah dengan Anda amplifier, refer to the following troubleshooting guide before contacting support.
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak Ada Daya / Amplifier tidak menyala | Sekring putus Sambungan daya atau ground yang longgar Tidak ada sinyal pengaktifan jarak jauh. | Check and replace fuse (use correct rating) Pastikan semua sambungan daya dan ground terpasang dengan aman. Periksa sambungan kabel remote dan output unit utama. |
| Tidak ada Keluaran Suara | Loose input or speaker connections Gain ditetapkan terlalu rendah Volume unit utama terlalu rendah Pengaturan crossover tidak tepat | Check all RCA/high-level inputs and speaker wire connections Increase gain slowly Increase head unit volume Adjust X-OVER and FREQ settings |
| Suara Terdistorsi | Gain ditetapkan terlalu tinggi Impedansi speaker terlalu rendah Koneksi ground yang buruk | Kurangi pengaturan penguatan Pastikan speaker cocok ampperingkat impedansi penguat Verify ground connection is solid and clean |
| Amplifier Terlalu panas | Ventilasi tidak memadai Impedansi speaker terlalu rendah Extended high-volume operation | Relokasi amplifier or improve airflow Periksa impedansi speaker Kurangi volume atau izinkan amppenguat untuk mendinginkan |
9. Spesifikasi
Detailed technical specifications for the DS18 CANDY-X2B Amppengangkat:
| Fitur | Spesifikasi |
|---|---|
| Nomor Model | PERMEN-X2B |
| Jumlah Saluran | 2 |
| AmpKelas lifier | Kelas D |
| Daya Keluaran (Maks) | 800 Watt |
| RMS Wattage @ 4 Ohm | 2x120W |
| RMS Wattage @ 2 Ohm | 2x200W |
| RMS Wattage @ 4 Ohm Bridge | 350W |
| Impedansi Minimum | Stereo 2 Ohm / Jembatan 4 Ohm |
| Respon Frekuensi | 20Hz - 20KHz |
| Rasio Sinyal terhadap Kebisingan | 70dB |
| Jil.tage | 14.4 Volt (DC) |
| Suhu Operasional | Hingga 158 Derajat Fahrenheit |
| Dimensi (P x L x T) | 7.18x5x1.77 inci |
| Berat Barang | 3 pon |
| Bahan | Logam |
| Sertifikasi | Komisi Komunikasi Federal (FCC) |
10. Informasi Garansi
DS18 products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official DS18 websitus. Simpan struk pembelian Anda sebagai bukti pembelian untuk klaim garansi apa pun.
11. Dukungan
If you require further assistance or have questions not covered in this manual, please contact DS18 customer support through their official website or the contact information provided with your product. You can also visit the DS18 Store on Amazon untuk informasi produk dan sumber daya tambahan.
