Secukey SK4-W

Secukey SK4-W Standalone Access Control System

Panduan Pengguna

1. Pendahuluan

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Secukey SK4-W Standalone Access Control System. Please read this manual carefully before installation and use to ensure proper functionality and safety.

The Secukey SK4-W is a robust, IP66-rated access control device designed for outdoor use, featuring RFID card and PIN code access. It is an ideal solution for securing doors, gates, and other entry points.

2. Produk Lebihview

2.1 Fitur Utama

  • IP66 Waterproof and Anti-Vandal Design: Cocok untuk lingkungan luar ruangan yang keras.
  • Beberapa Mode Akses: Supports RFID card only, PIN code only, or Card + PIN for enhanced security.
  • Kapasitas Pengguna Tinggi: Manages up to 1000 users.
  • Integrated Relay: Built-in NO, NC, Com relay for direct door lock control.
  • Adjustable Output Times: Programmable lock output time (1-99 seconds) and alarm output time (1-3 minutes).
  • Wiegand 26-bit Interface: Supports external Wiegand readers, exit buttons, and alarms.
  • Latch Mode: Allows the door or gate to remain open.
  • Volume lebartagRentang: Operates on 12~28V AC/DC.
  • Papan tombol dengan lampu latar: Memastikan visibilitas dalam kondisi cahaya redup.
  • Konstruksi Tahan Lama: Zinc alloy casing with powder coating.

2.2 Komponen yang Termasuk

  • 1 x Secukey SK4-W Standalone Access Control Device (RFID/PIN)
  • 1 x Master Add Card
  • 1 x Master Delete Card
  • 1 x Panduan Pengguna

2.3 Produk Views

Depan view of the Secukey SK4-W access control system, showing the silver casing and black keypad with numbers 0-9, asterisk, and hash symbols.

Gambar 1: Depan view of the SK4-W unit, highlighting the keypad and Secukey branding.

Bagian depan bersudut view of the Secukey SK4-W access control system, showing the silver casing and black keypad.

Gambar 2: Sudut view of the SK4-W, providing a perspective of its slim profile.

Samping view of the Secukey SK4-W access control system, emphasizing its compact design.

Gambar 3: Sisi view of the SK4-W unit.

Sisi lain view of the Secukey SK4-W access control system, showing the depth of the unit.

Gambar 4: Sisi lain view of the SK4-W unit.

Kembali view of the Secukey SK4-W access control system, showing the wiring harness for connections.

Gambar 5: Kembali view of the SK4-W unit, displaying the integrated wiring for installation.

3. Pengaturan dan Instalasi

3.1 Memasang Perangkat

The SK4-W is designed for surface mounting. Choose a secure location near the door or gate, ensuring it is within reach for users and protected from direct impact. Use appropriate screws and wall plugs for the mounting surface.

3.2 Diagram Pengkabelan

The device requires a 12~28V AC/DC power supply (not included). Connect the wires according to the diagram provided in the full manual. Ensure all connections are secure and insulated to prevent short circuits.

  • Masukan Daya: Connect to 12~28V AC/DC power source.
  • Lock Output (NO/NC/COM): Connect to your electric lock.
  • Alarm Output: Connect to an external alarm system (if applicable).
  • Wiegand In/Out: For connecting external Wiegand readers or other Wiegand devices.
  • Tombol Keluar: Connect a push-to-exit button for convenient egress.

For detailed wiring schematics, please refer to the comprehensive wiring diagram included in the product packaging.

4. Petunjuk Pengoperasian

4.1 Initial Setup and Master Cards

Upon first power-up, the device will be in factory default mode. Use the included Master Add Card and Master Delete Card to manage user access.

  • Menambahkan Pengguna: Present the Master Add Card, then present the new user's RFID card or enter their PIN.
  • Menghapus Pengguna: Present the Master Delete Card, then present the user's RFID card or enter their PIN to be deleted.

4.2 Mode Akses

The SK4-W supports three primary access modes:

  1. Card Only Mode: Users gain access by presenting a valid RFID card.
  2. PIN Only Mode: Users gain access by entering a valid 4-6 digit PIN code.
  3. Card + PIN Mode: Users must present a valid RFID card and then enter their corresponding PIN code for access. This mode offers the highest security.

Refer to the full programming guide for instructions on how to switch between access modes and manage user PINs.

4.3 Visitor PINs

The SK4-W supports up to 10 visitor PINs, which can be set to be valid for 1 to 10 uses. This feature is useful for temporary access for guests or service personnel.

Image illustrating the visitor PIN feature, showing a person using the access control system and a separate image of the device in water, indicating IP66 waterproof rating.

Figure 6: The SK4-W supports visitor PINs and is IP66 waterproof, suitable for outdoor installation.

4.4 Latch Mode

The latch mode allows the door or gate to remain unlocked for an extended period, which can be useful during peak hours or for maintenance. Consult the programming manual for activation and deactivation procedures.

5. Pemeliharaan

The Secukey SK4-W is designed for minimal maintenance due to its robust construction and IP66 rating. However, regular checks can prolong its lifespan and ensure optimal performance.

  • Pembersihan: Wipe the keypad and casing dengan lembut, damp kain. Hindari pembersih atau pelarut abrasif.
  • Pemeriksaan Koneksi: Periodically inspect wiring connections for any signs of wear, corrosion, or loosening.
  • Pembaruan Firmware: Periksa pabrikannya websitus untuk pembaruan firmware yang tersedia.
Image showing the Secukey SK4-W access control system embedded in ice, illustrating its ability to operate in extreme cold temperatures down to -40 degrees Celsius.

Figure 7: The SK4-W is designed to withstand extreme operating temperatures, from -40°C to 60°C.

6. Penyelesaian masalah

MasalahKemungkinan PenyebabLarutan
Perangkat tidak menyala.Tidak ada catu daya; tegangan tidak tepattage; loose wiring.Check power connections and ensure correct 12~28V AC/DC supply. Verify wiring.
Kartu RFID tidak dikenali.Card not enrolled; incorrect card type (not 125 KHz EM); damaged card.Ensure the card is properly enrolled. Verify it is a 125 KHz EM card. Try another card.
Kode PIN tidak berfungsi.Incorrect PIN; PIN not enrolled; device in card-only mode.Double-check the PIN. Ensure the PIN is enrolled. Verify the access mode setting.
Door lock not activating.Incorrect lock wiring (NO/NC); lock power issue; relay output time too short.Check lock wiring and power. Adjust the lock output time in settings.
Wiegand output issues.Incorrect Wiegand wiring; incompatible Wiegand device.Verify Wiegand 26-bit wiring. Ensure external device compatibility.

If the problem persists, please contact Secukey technical support for assistance.

Diagram illustrating Wiegand 26-bit input and output data signals, showing Data 0 and Data 1 waveforms with timing specifications.

Figure 8: Wiegand 26-bit input and output signal timing diagram.

7. Spesifikasi

AtributNilai
Nomor ModelSK4-W
MerekAman
Dimensi (P x L x T)Ukuran 13.0x5.6x2.3 cm
Berat500 gram
WarnaPerak
Catu Daya12 ~ 28V AC / DC
Peringkat Perlindungan Ingress (IP)IP66 (Waterproof, Anti-Vandal)
Kapasitas PenggunaHingga 1000 pengguna
Panjang Kode PIN4 sampai 6 digit
Jenis Kartu125 KHz EM Card
Antarmuka WiegandWiegand 26-bit Input & Output
Kunci Beban Keluaran3A Maksimal
Beban Output Alarm3A Maksimal
Suhu Operasional-40 °C hingga 60 °C (-40 °F hingga 140 °F)
Kelembaban Operasional10% hingga 90% (tanpa kondensasi)
Casing BahanZinc Alloy with Powder Coating

8. Garansi dan Dukungan

Secukey products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Secukey weblokasi.

Informasi Kontak:

  • Pabrikan: Aman
  • Weblokasi: www.secukey.com (Mantanamp(tautan sebenarnya mungkin berbeda)
  • Pelayanan pelanggan: Lihat kemasan produk atau webSitus untuk kontak dukungan regional.

Harap simpan bukti pembelian Anda untuk klaim garansi.

Dokumen Terkait - SK4-W

Praview Secukey K7 Mini Keypad: Standalone Access Control User Manual
Comprehensive user manual for the Secukey K7 Mini Keypad, detailing installation, programming, access modes, Wiegand integration, and troubleshooting for standalone door access control systems.
Praview Panduan Pengguna Kontrol Akses RFID Tertanam Secukey E2/E3
Panduan pengguna komprehensif untuk sistem kontrol akses RFID tertanam Secukey E2 dan E3. Meliputi detail instalasi, konfigurasi, manajemen pengguna, dan pengoperasian.
Praview Panduan Pengguna Akses Interkom Video Secukey VCONTROL-4F
Panduan pengguna untuk sistem interkom video Secukey VCONTROL-4F, yang merinci instalasi, pemrograman, fitur, dan pemecahan masalah untuk kontrol akses RFID dan sidik jari.
Praview Panduan Instalasi Interkom Video Secukey VCONTROL 4-R dengan Kontrol Akses
Panduan instalasi lengkap untuk sistem interkom video Secukey VCONTROL 4-R, yang dilengkapi kemampuan kontrol akses. Dokumen ini menyediakan instruksi detail, spesifikasi teknis, dan diagram pengkabelan untuk menyiapkan perangkat.
Praview Panduan Pengguna Pembaca RFID Seri Secukey S-RX
Panduan pengguna untuk pembaca RFID Seri Secukey S-RX, yang merinci spesifikasi, pemasangan, pengkabelan, sinyal data, dan kepatuhan FCC untuk teknologi kartu EM/HID 125 KHz dan kartu Mifare 13.56 MHz.
Praview Pembaca Secukey XK6-RX OSDP: Panduan Pengguna, Instalasi, dan Pemrograman
Panduan lengkap untuk Secukey XK6-RX OSDP Reader. Meliputi fitur, spesifikasi, instalasi, pengkabelan, mode pemrograman, pengaturan keypad, baud rate, alamat OSDP, pengaturan ulang pabrik, dan daftar kemasan untuk sistem kontrol akses.