StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Model: RKCONS1901 | Merek: StarTech.com

1. Pendahuluan

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Apa yang ada di dalam kotak

  • Konsol KVM
  • 6 ft [1.8 m] KVM cable
  • mur sangkar M5
  • Sekrup M5

3. Pengaturan dan Instalasi

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Pemasangan Rak

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Menghubungkan Kabel

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Belakang view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Gambar 2: Belakang view of the KVM Console with connection ports.

3.3 Referensi Video Instalasi

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Petunjuk Pengoperasian

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Menggunakan Keyboard dan Touchpad

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Navigasi Menu OSD

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Pemeliharaan

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Pembersihan: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Ventilasi: Ensure proper airflow around the console. Do not block ventilation openings.
  • Manajemen Kabel: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Kondisi Lingkungan: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Penyelesaian masalah

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Tidak Ada Tampilan: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Keyboard/Mouse Tidak Merespons: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Spesifikasi

FiturSpesifikasi
Nomor ModelRKCONS1901
MerekStarTech.com
Tinggi Rak1U
Ukuran Layar19 inci
Jenis TampilanActive Matrix TFT LCD
Max Resolusiukuran 1280x1024
Papan ketik99-key full keyboard with numeric keypad
Perangkat PenunjukPapan sentuh
Antarmuka VideoVGA
Dukungan USBYa
Suhu Operasional0 to 40 Degrees Celsius
MTBF50,000 jam
Dimensi Produk (P x L x T)21x19x1.7 inci
Berat Barang26.8 pon

8. Garansi dan Dukungan

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com websitus web atau hubungi layanan pelanggan mereka secara langsung. Simpan struk pembelian Anda untuk klaim garansi.

Dokumen Terkait - RKCONS1901

Praview StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch dengan OSD - Panduan Pengguna
Panduan pengguna lengkap untuk StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch dengan OSD (model SV431DUSBU, SV831DUSBU, SV1631DUSBU). Pelajari tentang instalasi, pengoperasian, fitur OSD, spesifikasi, dan dukungan teknis.
Praview Panduan Pengguna Sakelar KVM Rak 8-Port StarTech.com - 4K 60Hz
Panduan pengguna untuk Switch KVM Rackmount 8-Port StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH. Panduan ini memberikan petunjuk detail tentang instalasi, menghubungkan konsol dan PC, serta menggunakan perintah hotkey untuk pengoperasian 4K 60Hz.
Praview Panduan Pengguna StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch dengan OSD
Panduan pengguna ini memberikan informasi detail tentang StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch dengan OSD, termasuk instalasi, pengoperasian, spesifikasi, dan dukungan teknis.
Praview StarTech.com SV441DUSBI / SV841DUSBI Switch KVM USB Digital Canggih 4/8 Port Melalui IP dengan File Mentransfer Manual Pengguna
Panduan pengguna untuk StarTech.com SV441DUSBI dan SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP dengan File Transfer. Pelajari tentang instalasi, konfigurasi, pengoperasian, manajemen jarak jauh, dan pemecahan masalah.
Praview StarTech.com SV231DVIUDDM & SV431DVIUDDM: Panduan Pengguna Switch KVM USB DVI 2 & 4 Port
Panduan pengguna untuk StarTech.com SV231DVIUDDM (2-port) dan SV431DVIUDDM (4-port) DVI USB KVM Switches dengan DDM. Meliputi instalasi, pengoperasian, spesifikasi, fungsi hotkey, dukungan teknis, dan informasi garansi.
Praview StarTech.com ADJSHELFHD/ADJSHELFHDV Rak Pemasangan Tetap Beban Tinggi 1U yang Dapat Diatur - Instalasi dan Spesifikasi
Pelajari cara memasang dan menggunakan rak server StarTech.com ADJSHELFHD dan ADJSHELFHDV 1U yang dapat disesuaikan dan mampu menahan beban tinggi. Panduan ini mencakup langkah-langkah pemasangan, aksesori yang disertakan, dan spesifikasi teknis untuk rak server yang tahan lama ini.