Steinbach Active Balls+ Filter System Instruction Manual

Perkenalan

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Steinbach Active Balls+ Filter System, model 040386. This non-self-priming pump is designed to maintain crystal-clear water in pools up to approximately 19,000 liters. Please read this manual thoroughly before initial use to ensure proper function and longevity of your filter system.

Petunjuk Keselamatan

Selalu perhatikan tindakan pencegahan keselamatan berikut untuk mencegah cedera atau kerusakan:

• Pastikan catu daya sesuai dengan spesifikasi pada label produk.
• Putuskan sambungan catu daya sebelum melakukan perawatan atau pembersihan apa pun.
• Jangan mengoperasikan pompa jika kabel listrik atau steker rusak.
• Keep children and unauthorized persons away from the filter system during operation.
• Install the filter system on a stable, level surface, protected from direct sunlight and rain.
• Do not run the pump dry. Ensure it is always filled with water during operation.
• Maximum water temperature for operation is 35°C (95°F).
• Suitable for saltwater up to a salt content of 5 g/l.

Produk Selesaiview dan Komponen

The Steinbach Active Balls+ Filter System consists of several key components designed for optimal pool water filtration.

Gambar 1: Lebihview of the Steinbach Active Balls+ Filter System components, showing the filter tank, pump unit, and various connection parts.

Gambar 2: Rinci view of the 7-way valve, indicating various operational modes such as Filter, Rinse, Waste, Recirculate, Closed, and Backwash.

Figure 3: Product label displaying technical specifications of the pump, including model number, power, voltage, and maximum temperature.

Figure 4: The filter system alongside a visual representation of the filter balls, which are the primary filtration medium.

Figure 5: Dimensional diagram illustrating the approximate height of the filter tank, which is 55 cm (22 inches).

Pengaturan

Follow these steps for initial setup of your filter system:

1. Bongkar Komponen: Keluarkan semua bagian dari kemasan dengan hati-hati. Periksa apakah semua komponen ada sesuai dengan daftar kemasan.
2. Posisikan Sistem: Place the filter system on a firm, level surface near your pool, ensuring it is protected from direct weather exposure.
3. Install Filter Balls: Open the filter tank and carefully pour the approximately 300g of filter balls into the tank. Ensure the central pipe is correctly positioned before closing the tank.
4. Connect Pump to Filter Tank: Attach the pump unit to the filter tank using the provided connections. Ensure all seals are properly seated and connections are tightened to prevent leaks. It is recommended to use PTFE tape on threaded connections for a secure seal.
5. Hubungkan ke Pool: Connect the pool hoses to the filter system's inlet and outlet ports. The inlet hose typically connects from the pool skimmer/main drain to the pump's suction side, and the outlet hose connects from the filter's return side back to the pool.
6. Isi dengan Air: Before starting the pump, ensure the pool is filled with water and the filter system is primed by allowing water to flow into the pump and filter tank.
7. Sambungan Listrik: Connect the power plug to a grounded electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for safety.

Operating the 7-Way Valve

The 7-way valve controls the flow of water through the filter system. Always turn off the pump before changing the valve position.

• MENYARING: This is the standard operating position for daily filtration. Water flows from the pool, through the filter balls, and back to the pool.
• CUCI BELAKANG: Used for cleaning the filter balls. Water flows in reverse through the filter, dislodging trapped debris, and is then directed to waste. Perform backwash when the pressure gauge indicates higher than normal pressure or when water flow decreases.
• BILASAN: Used after backwashing to flush out any remaining debris from the filter and settle the filter balls. Water flows through the filter and is directed to waste.
• LIMBAH: Bypasses the filter and sends water directly from the pool to waste. Useful for vacuuming heavy debris directly to waste or lowering the pool water level.
• REsirkulasi: Circulates water through the pump and back to the pool without passing through the filter. Useful for distributing chemicals quickly.
• TERTUTUP: Shuts off all flow to the filter and pump. Use this position only when the pump is off and for maintenance or when the pool is not in use.
• MUSIM DINGIN: (If applicable) Position for draining the system for winter storage. Consult specific winterization instructions.

Pemeliharaan

Regular maintenance ensures optimal performance and extends the life of your filter system.

• Pencucian balik: Perform backwashing regularly, typically once a week or when the pressure gauge reading increases by 0.2-0.3 bar (3-5 psi) above its clean operating pressure.
  1. Matikan pompa.
  2. Set the 7-way valve to "BACKWASH".
  3. Turn on the pump and run until the water in the sight glass (if present) runs clear (approx. 2-3 minutes).
  4. Matikan pompa.
  5. Set the 7-way valve to "RINSE".
  6. Turn on the pump and run for 30-60 seconds.
  7. Matikan pompa.
  8. Set the 7-way valve back to "FILTER".
  9. Turn on the pump to resume normal filtration.
• Cleaning Filter Balls: The filter balls can be cleaned manually or in a washing machine (in a laundry bag) at 30°C (86°F) without fabric softener. Replace filter balls when they show signs of significant wear or reduced filtration efficiency.
• Pembersihan Keranjang Pompa: Periodically check and clean the pump's pre-filter basket (if applicable) to remove large debris that could obstruct flow.
• Musim dingin: Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location.

Penyelesaian Masalah

Lihat bagian ini untuk masalah umum dan solusinya.

Spesifikasi

Garansi dan Dukungan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Steinbach customer service. Keep your proof of purchase for warranty claims.