1. Pendahuluan
Terima kasih sudah membeliasing the FERM CDA1102 3.6V Charger. This charger is specifically designed for use with the FERM CDM1132 lithium-ion cordless screwdriver. Please read this manual carefully before use to ensure safe and efficient operation. Keep this manual for future reference.
2. Petunjuk Keselamatan
Selalu perhatikan tindakan pencegahan keselamatan berikut saat menggunakan pengisi daya:
- Baca semua instruksi: Sebelum menggunakan pengisi daya, baca semua petunjuk dan tanda peringatan pada pengisi daya, baterai, dan produk yang menggunakan baterai.
- Penggunaan dalam ruangan saja: Pengisi daya ini dirancang hanya untuk penggunaan di dalam ruangan. Jangan sampai terkena hujan atau kondisi basah.
- Volume yang tepattage: Pastikan sumber listrik voltage cocok dengan voltage ditentukan pada pengisi daya.
- Hindari kerusakan: Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged. Take it to a qualified service person.
- Ventilasi: Jangan menghalangi lubang ventilasi. Pastikan aliran udara yang cukup di sekitar pengisi daya selama pengoperasian.
- Putuskan daya: Always disconnect the charger from the power source before attempting any cleaning or maintenance.
- Anak-anak dan orang yang tidak berwenang: Keep the charger out of reach of children and persons unfamiliar with these instructions.
- Use only with specified battery: This charger is intended for charging the FERM CDM1132 lithium-ion battery only. Do not attempt to charge other types of batteries, as they may burst, causing personal injury and damage.
3. Produk Lebihview
The FERM CDA1102 charger is a compact unit designed for convenient charging.
Gambar 1: Samping view of the FERM CDA1102 charger, showing the compact design and European plug pins.
Gambar 2: Depan view of the FERM CDA1102 charger, highlighting the USB output port for connecting to the device.
Komponen:
- Unit Pengisi Daya: The main body with integrated plug.
- Port Keluaran USB: For connecting the USB cable to the FERM CDM1132 screwdriver.
- Kabel USB: Supplied for connecting the charger to the screwdriver.
4. Pengaturan
Follow these steps to set up your FERM CDA1102 charger:
- Membongkar: Carefully remove the charger and USB cable from its packaging.
- Memeriksa: Check the charger and cable for any signs of damage. Do not use if damaged.
- Hubungkan Kabel USB: Insert one end of the supplied USB cable into the USB output port of the FERM CDA1102 charger.
- Connect to Screwdriver: Insert the other end of the USB cable into the charging port of your FERM CDM1132 cordless screwdriver.
- Colokkan ke Stopkontak: Insert the charger's plug into a suitable wall power outlet (220-240V AC, 50/60Hz).
Ensure all connections are secure before proceeding to operation.
5. Operation (Charging Process)
Once the charger is set up, the charging process will begin automatically.
- Mulai Pengisian: After connecting the charger to the screwdriver and plugging it into a power outlet, the charging indicator on your FERM CDM1132 screwdriver (if present) should illuminate, indicating that charging has started. Refer to your screwdriver's manual for specific indicator details.
- Waktu Pengisian: Charging time may vary depending on the battery's current charge level and ambient temperature.
- Penyelesaian: The charging indicator on your screwdriver will typically change color or turn off when the battery is fully charged. Disconnect the screwdriver from the charger once charging is complete to prevent overcharging and prolong battery life.
- Putuskan Sambungan dari Daya: Always unplug the charger from the wall outlet when not in use.
Catatan: The charger itself does not have an indicator light. The charging status is typically displayed on the connected FERM CDM1132 cordless screwdriver.
6. Pemeliharaan
Perawatan yang tepat memastikan umur panjang dan kinerja pengisi daya Anda yang optimal.
- Pembersihan: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use abrasive cleaners or solvents.
- Penyimpanan: Store the charger in a dry, cool place, away from direct sunlight and moisture, when not in use. Keep it out of reach of children.
- Perawatan Kabel: Avoid bending or kinking the USB cable excessively. Do not pull the cable to disconnect the charger from the outlet; always grasp the plug.
- Inspeksi: Periodically inspect the charger and cable for any signs of wear or damage. If damage is found, discontinue use and replace the unit.
7. Penyelesaian masalah
If you encounter issues with your FERM CDA1102 charger, refer to the following common problems and solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Screwdriver not charging. |
|
|
| Pengisian lambat. |
|
|
| Pengisi daya terasa hangat saat digunakan. |
|
|
| Jil.tage discrepancy (e.g., label says 5V, product description says 3.6V). |
| The FERM CDA1102 is designed to output 3.6V (DC) for the CDM1132 screwdriver. While some labels might indicate a 5V input (standard for USB power sources), the charger's function is to provide the correct 3.6V output for the tool's battery. If you have concerns, verify the output with a multimeter or contact customer support. |
8. Spesifikasi
| Nomor Model | CDA1102 |
| Masukan Voltage | 220-240V AC, 50/60Hz (via standard wall outlet) / 5V DC (via USB connection to charger) |
| Volume Keluarantage | Tegangan DC 3.6V |
| Alat yang Kompatibel | FERM CDM1132 Lithium-ion Cordless Screwdriver |
| Dimensi (P x L x T) | Ukuran 6x2x3.5 cm |
| Berat | 60 gram |
| Komponen yang Termasuk | FERM CDA1102 USB Charger, USB Cable |
| Sertifikasi | CE |
Catatan: Spesifikasi dapat berubah sewaktu-waktu tanpa pemberitahuan sebelumnya demi peningkatan produk.
9. Garansi dan Dukungan
Informasi Garansi:
For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or consult the official FERM websitus. Simpan bukti pembelian Anda untuk klaim garansi apa pun.
Dukungan Pelanggan:
If you have any questions, require technical assistance, or need to report a problem with your FERM CDA1102 charger, please contact FERM customer support or visit the official FERM websitus untuk bantuan lebih lanjut.
Official FERM Weblokasi: www.ferm.com (Catatan: Ini adalah tempat penampung URL. Please refer to the actual FERM websitus untuk wilayah Anda.)
