Produk Selesaiview
The OER 9624995 Windshield Glass Support is a reproduction component designed for 1970-1981 Camaro models. This part is crucial for properly positioning and supporting the vehicle's windshield glass. It is constructed from stamped galvanized steel and features a rubber-coated foot for secure placement and protection. Each support includes an installation screw. Two units are typically required for a complete installation.
An image showing the OER 9624995 Windshield Glass Support. This component features a black rubber-coated section attached to a galvanized steel base, which includes a circular mounting hole. The steel base has a distinct shape designed for specific vehicle fitment.
Panduan Instalasi
This section provides general guidance for the installation of the OER 9624995 Windshield Glass Support. Professional installation is recommended to ensure proper fitment and vehicle integrity.
- Persiapan: Ensure the vehicle's windshield area is clean and free from debris. Gather necessary tools, which may include screwdrivers, wrenches, and protective eyewear.
- Pelepasan Komponen Lama (jika ada): Carefully remove any existing or damaged windshield glass support components. Note the original positioning for accurate reinstallation.
- Positioning the Support: Place the new OER 9624995 Windshield Glass Support in its designated location. The galvanized steel base should align with the mounting point, and the rubber-coated foot should be positioned to support the windshield glass.
- Securing the Support: Use the included installation screw to firmly attach the support to the vehicle's frame. Ensure the screw is tightened securely but do not overtighten to avoid damaging the component or vehicle.
- Repeat for Second Support: If installing two supports (as typically required), repeat the process for the second unit on the opposite side.
- Pemeriksaan Akhir: After installation, verify that both supports are securely fastened and that the windshield glass is properly seated and supported.
Note: Specific installation procedures may vary based on the exact vehicle model and existing conditions. Refer to a vehicle-specific service manual for detailed instructions.
Fungsi dan Tujuan
The OER 9624995 Windshield Glass Support serves a critical structural role in the vehicle. Its primary function is to provide stable and precise positioning for the windshield glass, preventing movement and ensuring a secure fit within the vehicle's frame. The rubber-coated foot helps to cushion the glass, reduce vibrations, and prevent direct metal-to-glass contact, which could lead to damage.
Pemeliharaan
The OER 9624995 Windshield Glass Support is designed for durability and requires minimal maintenance. However, periodic inspection can help ensure its longevity and proper function.
- Inspeksi Visual: Periodically inspect the support for any signs of wear, corrosion on the galvanized steel, or degradation of the rubber coating. Check for loose screws or any deformation.
- Pembersihan: If dirt or debris accumulates on the support, gently clean it with a damp cloth. Avoid harsh chemicals that could damage the rubber or galvanized finish.
- Pemeriksaan Kekencangan: Occasionally check the tightness of the installation screw to ensure the support remains firmly attached.
Penyelesaian Masalah
If issues arise with the windshield glass support, consider the following:
- Windshield Rattle or Movement:
- Menyebabkan: Loose installation screw or worn rubber foot.
- Larutan: Check and tighten the installation screw. If the rubber foot is significantly worn or damaged, the support may need replacement.
- Visible Damage to Support:
- Menyebabkan: Impact, age, or environmental exposure.
- Larutan: If the galvanized steel is bent or corroded, or the rubber is cracked or missing, the support should be replaced to ensure proper windshield stability.
- Kesulitan Selama Instalasi:
- Menyebabkan: Incorrect part for vehicle model, existing vehicle damage, or improper alignment.
- Larutan: Verify the part number matches your vehicle's requirements. Inspect the vehicle's mounting area for any damage. Seek professional assistance if alignment issues persist.
Spesifikasi
| Atribut | Detil |
|---|---|
| Nama Produk | Windshield Glass Support |
| Nomor Model | 9624995 |
| Merek | BIJIH |
| Kesesuaian | 1970-1981 Pontiac Firebird & Chevy Camaro |
| Bahan | Stamped Galvanized Steel, Rubber |
| Ukuran | 2.5x2x1 inci |
| Berat Barang | 1 pon |
| Jumlah yang Dibutuhkan | 2 (Sold Individually) |
| Komponen yang Termasuk | Sekrup instalasi |
Informasi Garansi
Specific warranty details for the OER 9624995 Windshield Glass Support are not provided in this manual. For information regarding product warranty, please contact the manufacturer, ORE, or the authorized seller from whom the product was purchased. It is recommended to retain your proof of purchase for any warranty claims.
Dukungan Pelanggan
For technical assistance, installation queries, or other support needs related to the OER 9624995 Windshield Glass Support, please reach out to the manufacturer or your point of purchase.
- Pabrikan: BIJIH
- Penjual: Jolt Parts (if purchased via Amazon)
- Refer to the packaging or product listing for direct contact information.
