1. Pendahuluan
This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.
2. Informasi Keselamatan
- Bacalah semua petunjuk dengan saksama sebelum mengoperasikan perangkat.
- Pastikan voltase catu dayatage is within the specified range for the device. A power supply is not included and must be purchased separately.
- Jangan biarkan perangkat terkena kelembapan atau suhu ekstrem.
- Hanya personel berkualifikasi yang boleh melakukan pemasangan dan pemeliharaan.
- Putuskan aliran listrik sebelum membersihkan atau memperbaiki perangkat.
3. Isi Paket
Before installation, verify that the package contains the following items:
- Moxa EDS-208 Unmanaged Ethernet Switch
- Panduan Instalasi Cepat (jika disertakan)
- Kartu Garansi (jika disertakan)
Jika ada di antara barang-barang ini yang hilang atau rusak, silakan hubungi perwakilan penjualan Anda untuk mendapatkan bantuan.
4. Produk Lebihview
Gambar 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.
4.1. Tata Letak Panel Depan
- Blok Terminal Input Daya: Located at the top, a green removable terminal block for connecting the DC power supply.
- LED daya (P): Menunjukkan status daya perangkat.
- 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
- Tautan/LED Aktivitas: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.
5. Pengaturan
5.1. Memasang Sakelar
The EDS-208 supports DIN-rail mounting. To mount the switch:
- Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
- Hook the top of the DIN-rail clip over the top edge of the DIN rail.
- Press the switch firmly against the DIN rail until the clip snaps into place.
5.2. Menghubungkan Daya
Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage dan persyaratan saat ini.
- Pastikan sumber listrik dimatikan.
- Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
- Insert the terminal block firmly into its receptacle on the switch.
- Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.
5.3. Connecting Network Devices
Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.
6. Mengoperasikan Sakelar
6.1. Indikator LED
The EDS-208 features several LED indicators to provide status information:
- LED daya (P):
- Pada: Sakelar menerima daya.
- Mati: Sakelar tidak menerima daya.
- Link/Activity LEDs (per RJ45 port):
- Pada: Tautan jaringan yang valid telah terjalin.
- Berkedip: Data sedang dikirim atau diterima melalui port.
- Mati: Tidak ada tautan jaringan yang dibuat.
6.2. Fungsi Dasar
The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:
- Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
- Negosiasi Otomatis: Automatically determines the best speed and duplex mode for each connected device.
- MDI/MDI-X Otomatis: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
- Perlindungan terhadap Badai Siaran: Helps prevent network congestion caused by excessive broadcast traffic.
7. Pemeliharaan
7.1. Pembersihan
To clean the switch:
- Disconnect power to the device.
- Gunakan kain lembut dan kering untuk menyeka bagian luar sakelar.
- Jangan gunakan cairan pembersih atau aerosol, karena dapat merusak perangkat.
7.2. Pertimbangan Lingkungan
Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.
8. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada daya (LED daya mati) |
|
|
| No link (Link LED off) |
|
|
| Kinerja jaringan lambat |
|
|
9. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Model | EDS-208 |
| Port Ethernet | 8 port RJ45 10/100BaseT(X) |
| Standar | IEEE 802.3, 802.3u, 802.3x |
| Kecepatan Transfer Data | 100 Megabits Per Second (Max) |
| Masukan Daya | Not specified (Power Supply not Included) |
| Peringkat Saat Ini | 0.07 Amps |
| Suhu Operasional | -10 hingga 60°C (14 hingga 140°F) |
| Suhu Penyimpanan | Tidak ditentukan |
| Kelembaban | Tidak ditentukan |
| Bahan Perumahan | Plastik |
| Dimensi (P x L x T) | 3.94 x 1.57 x 3.41 inci (100 x 40 x 86.6 mm) |
| Berat Barang | 1 pound (0.45 kg) |
| Pemasangan | rel DIN |
10. Garansi & Dukungan
10.1. Informasi Garansi
Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa websitus. Simpan bukti pembelian Anda untuk klaim garansi.
10.2. Dukungan Teknis
If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa weblokasi (www.moxa.com) atau melalui distributor lokal Anda.
