1. Pendahuluan
This manual provides detailed instructions for the installation, operation, and maintenance of your ELCO Lighting ELST66BZ 120V LED Mini Step Light. This product is designed to provide efficient and reliable illumination for steps, pathways, and other outdoor areas. Please read this manual thoroughly before installation and retain it for future reference.
2. Informasi Keselamatan
Untuk memastikan pemasangan dan pengoperasian yang aman, harap perhatikan tindakan pencegahan berikut:
- PERINGATAN: Risiko sengatan listrik. Putuskan sambungan daya pada sekring atau pemutus arus sebelum memasang atau menyervis.
- Semua sambungan listrik harus sesuai dengan peraturan daerah, peraturan daerah, atau Kode Listrik Nasional (NEC). Konsultasikan dengan teknisi listrik yang berkualifikasi jika Anda tidak terbiasa dengan sambungan kabel listrik yang benar.
- This product is intended for outdoor use and is UL listed for wet locations.
- Jangan memasang di dekat bahan yang mudah terbakar.
- Ensure the fixture is securely mounted to a standard single-gang receptacle box.
- Jangan mencoba memodifikasi perlengkapan atau komponennya.
3. Isi Paket
Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:
- ELCO Lighting ELST66BZ LED Mini Step Light Fixture (1)
- Perangkat Keras Pemasangan (sekrup, mur kawat)
- Pemasangan Bracket
4. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Nomor Model | ELST66BZ |
| Masukan Voltage | 120V |
| Konsumsi Daya | 0.8W |
| Sumber Cahaya | LED terintegrasi |
| Suhu Warna | 3000K (Putih Hangat) |
| Indeks Renderasi Warna (CRI) | 90+ |
| Bahan Lensa | Smooth White Acrylic |
| Dimensi Pelat Depan | 4 1/2" W x 2 3/4" H |
| Pemasangan | Horizontal or Vertical, Single-Gang Box |
| Bahan Perumahan | St.Galvanisampbaja ed |
| Menyelesaikan | Black (Powder-Coated) |
| Jangka hidup | 35,000 jam (L70) |
| Sertifikasi | UL Listed for Wet Locations |
5. Petunjuk Instalasi
Follow these steps to install your ELCO Lighting ELST66BZ LED Mini Step Light:
- Mempersiapkan untuk Instalasi:
- Matikan aliran listrik di pemutus sirkuit atau kotak sekering untuk menghindari sengatan listrik.
- Ensure the mounting location is a standard single-gang receptacle box.
- Pasang Braket:
- Attach the provided installation bracket to the single-gang box using the screws.
- Buat Sambungan Listrik:
- Connect the black wire from the fixture to the black (hot) wire from the electrical box.
- Hubungkan kabel putih dari lampu ke kabel putih (netral) dari kotak listrik.
- Connect the green (ground) wire from the fixture to the bare copper or green ground wire from the electrical box.
- Secure all connections with wire nuts and ensure they are tight. Carefully tuck wires into the electrical box.
- Pasang Perlengkapannya:
- Align the step light fixture with the mounting bracket.
- Secure the fixture to the bracket using the provided screws. Ensure the faceplate sits flush against the mounting surface.
- Pulihkan Daya:
- Nyalakan kembali daya pada pemutus arus atau kotak sekering.
- Uji lampu untuk memastikan pengoperasian yang benar.
6. Operasi
The ELCO Lighting ELST66BZ LED Mini Step Light operates directly from a 120V power supply. Once properly installed and connected to a switched power source, the light will illuminate when the switch is activated. The integrated LED provides a warm white light (3000K) with high color accuracy (90+ CRI), designed for consistent and long-lasting performance.
7. Pemeliharaan
The ELCO Lighting ELST66BZ LED Mini Step Light requires minimal maintenance:
- Pembersihan: Bersihkan perlengkapan secara berkala dengan kain lembut.amp cloth to remove dust and debris. Do not use abrasive cleaners or solvents, as these may damage the finish or lens.
- Umur Panjang LED: The integrated LED is designed for a long lifespan (35,000 hours L70) and does not require bulb replacement.
- Inspeksi: Occasionally inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and address them promptly.
8. Penyelesaian masalah
If your ELCO Lighting ELST66BZ LED Mini Step Light is not functioning as expected, refer to the following table:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu tidak menyala | Tidak ada daya ke perlengkapan | Periksa pemutus arus atau sekring. Pastikan sakelar dinding dalam keadaan AKTIF. |
| Kabel longgar atau salah | Turn off power. Verify all wire connections are secure and correct according to Section 5. | |
| Cahaya berkedip | Sambungan kabel longgar | Turn off power. Check and tighten all wire connections. |
| Sakelar peredup yang tidak kompatibel (jika ada) | This fixture is not designed for use with dimmer switches. Ensure it is connected to a standard ON/OFF switch. | |
| Output cahaya berkurang | Dirt or debris on lens | Bersihkan lensa dengan lembut, damp kain. |
If the problem persists after attempting these solutions, contact ELCO Lighting customer support.
9. Garansi dan Dukungan
ELCO Lighting products are manufactured to high standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official ELCO Lighting website. For technical assistance, replacement parts, or any other inquiries, please contact ELCO Lighting customer support through their official channels.
ELCO Lighting Contact Information:
Please refer to the ELCO Lighting official websitus atau kemasan produk untuk rincian kontak terkini.
