IKEA 602.172.28 Wall/Ceiling Bracket

1. Produk Lebihview

The IKEA 602.172.28 Wall/Ceiling Bracket is designed to securely hold curtain rods, allowing for flexible curtain placement. Its adjustable design enables curtains to be hung either close to the window or further out, accommodating various window treatments and room layouts. This bracket is compatible with RÄCKA and HUGAD curtain rods and can be used to create single, double, or triple-layer curtain solutions.

Fitur Utama:

• Adjustable curtain rod holder position.
• Includes two anti-slip liners: a thick liner for RÄCKA curtain rods and a thin liner for HUGAD curtain rods.
• Supports creation of double- or triple-layer curtain solutions with additional BETYDLIG curtain rod holders.

2. Komponen

The IKEA 602.172.28 Wall/Ceiling Bracket consists of the following parts:

• Wallbracket/Hook: Made of Steel with Epoxy/polyester powder coating.
• Bantal: Made of Silicone rubber.
• Menutupi: Made of ABS plastic.
• Sekrup: Made of Steel, Galvanized, Paint.

3. Pengaturan dan Instalasi

Follow these steps to properly install your IKEA 602.172.28 Wall/Ceiling Bracket:

1. Pilih Lokasi Pemasangan: Determine whether you will mount the bracket on the wall or the ceiling. Ensure the surface is suitable for drilling and can support the weight of the curtains and rod.
2. Tandai Lubang Bor: Hold the bracket in the desired position and mark the locations for the mounting screws. Use a level to ensure proper alignment.
3. Lubang Bor: Drill pilot holes at the marked locations. Use appropriate drill bits and wall plugs for your wall or ceiling material (wall plugs are typically sold separately).
4. Braket Aman: Attach the bracket to the wall or ceiling using the provided screws. Ensure it is firmly secured.
5. Insert Anti-slip Liner: Select the appropriate anti-slip liner for your curtain rod. Use the thick liner for RÄCKA curtain rods or the thin liner for HUGAD curtain rods. Insert the liner into the bracket's rod holder.
6. Insert Curtain Rod: Place your RÄCKA or HUGAD curtain rod into the bracket's holder.
7. Sesuaikan Posisi: The curtain rod holder position can be adjusted to hang curtains closer to or further from the wall/window. Loosen the adjustment screw, slide the holder to the desired depth, and then tighten the screw to secure it.
8. Add Additional Brackets (Optional): For wider windows or heavier curtains, install additional brackets for support. For double or triple-layer curtain solutions, add extra BETYDLIG curtain rod holders (sold separately) to the main bracket.

4. Operasi

Once installed, the bracket requires minimal operation. The primary adjustable feature is the depth of the curtain rod from the mounting surface.

• Adjusting Rod Depth: To change how far the curtain rod extends from the wall or ceiling, locate the small screw on the side of the rod holder. Loosen this screw, slide the rod holder to the desired position, and then firmly tighten the screw to secure it.
• Inserting/Removing Rods: To insert or remove a curtain rod, simply slide it into or out of the bracket's holder. Ensure the anti-slip liner is correctly in place to prevent the rod from slipping.

5. Pemeliharaan

To ensure the longevity and proper function of your bracket, follow these simple maintenance guidelines:

• Pembersihan: Wipe the bracket clean with a soft, damp cloth. Use a mild detergent if necessary, then wipe dry. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Inspeksi: Periodically check all screws and connections to ensure they remain tight. If any screws feel loose, tighten them carefully to prevent the bracket from becoming unstable.
• Anti-slip Liners: Ensure the silicone rubber cushion (anti-slip liner) is in good condition and properly seated within the bracket to prevent the curtain rod from slipping. Replace if damaged.

6. Penyelesaian masalah

If you encounter any issues with your bracket, consider the following solutions:

• Curtain Rod Slipping:
  • Ensure the correct anti-slip liner (thick for RÄCKA, thin for HUGAD) is used and properly inserted.
  • Verify that the adjustment screw holding the rod in place is tightened securely.
• Bracket Feels Loose:
  • Check and tighten all mounting screws securing the bracket to the wall or ceiling.
  • Ensure appropriate wall plugs were used during installation for your specific wall material.
• Difficulty Adjusting Rod Position:
  • Loosen the adjustment screw sufficiently before attempting to slide the rod holder.
  • Ensure no debris is obstructing the sliding mechanism.

7. Spesifikasi

8. Garansi dan Dukungan

Untuk informasi mengenai garansi, pengembalian, atau dukungan produk lebih lanjut, silakan merujuk ke situs resmi IKEA. websitus web atau hubungi layanan pelanggan IKEA secara langsung. Simpan struk pembelian Anda sebagai bukti pembelian.