Buku Panduan+

Xigmatek EN42098

Xigmatek Galaxy II Elite AY120 ARGB Fan Pack Instruction Manual

Model: EN42098

1. Pendahuluan

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Xigmatek Galaxy II Elite AY120 ARGB 3-fan pack. This product is designed to enhance your computer system's cooling performance and aesthetic appeal with addressable RGB lighting. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Informasi Keselamatan

  • Selalu putuskan daya dari komputer Anda sebelum memasang atau melepaskan komponen apa pun.
  • Tangani komponen dengan hati-hati untuk menghindari kerusakan akibat pelepasan muatan elektrostatik. Pertimbangkan untuk menggunakan gelang anti-statis.
  • Pastikan semua kabel terhubung dengan aman dan benar untuk mencegah korsleting atau kerusakan.
  • Do not attempt to modify the product. Unauthorized modifications may void your warranty and pose safety risks.
  • Jauhkan produk dari cairan dan suhu ekstrem.

3. Isi Paket

Verifikasi bahwa semua item yang tercantum di bawah ini ada dalam paket Anda:

  • 3 x Xigmatek Galaxy II Elite AY120 ARGB Fans (120mm)
  • 1 x Kotak Kontrol ARGB
  • 1 x Remote Control IR
  • Sekrup Pemasangan
Xigmatek Galaxy II Elite AY120 ARGB 3-fan pack with controller and remote

Image 3.1: Contents of the Xigmatek Galaxy II Elite AY120 ARGB 3-fan pack, including three 120mm ARGB fans, the ARGB control box, and the IR remote control.

4. Pengaturan dan Instalasi

Follow these steps to install your Xigmatek Galaxy II Elite AY120 ARGB fans:

  1. Siapkan Sistem Anda: Power off your computer and disconnect it from the power outlet. Open your computer case.
  2. Pasang Kipas:
    • Identify the desired mounting locations for the 120mm fans within your PC case (e.g., front, top, rear).
    • Secure each fan to the case using the provided mounting screws. Ensure the fan's airflow direction is appropriate for your cooling setup (typically intake at the front/bottom, exhaust at the rear/top).
  3. Connect Fans to Control Box:
    • Connect the 6-pin fan cables from each of the three AY120 ARGB fans to the corresponding ports on the ARGB Control Box.
    • Ensure connections are firm.
  4. Connect Control Box to Power:
    • Connect the SATA power connector from your power supply unit (PSU) to the ARGB Control Box. This provides power to the fans and RGB lighting.
  5. Connect Control Box to Motherboard (Optional ARGB Sync):
    • If your motherboard has a 5V 3-pin Addressable RGB (ARGB) header, you can connect the ARGB sync cable from the control box to this header. This allows you to control the fan lighting via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
    • Note: Do not connect to a 12V 4-pin RGB header, as this will damage the fans.
  6. Manajemen Kabel: Atur semua kabel dengan rapi untuk memastikan aliran udara yang baik dan hasil rakitan yang bersih.
  7. Langkah Akhir: Close your computer case, reconnect the power, and power on your system.
Atas view of a single Xigmatek Galaxy II Elite AY120 ARGB fan displaying its vibrant RGB lighting

Image 4.1: A single Xigmatek Galaxy II Elite AY120 ARGB fan, showcasing its illuminated blades and frame.

5. Petunjuk Pengoperasian

Once installed, you can control the ARGB lighting of your fans using either the included IR remote control or your motherboard's software (if connected to a 5V ARGB header).

5.1. Using the IR Remote Control

The IR remote allows you to cycle through various lighting effects, adjust brightness, and change colors. Point the remote directly at the ARGB Control Box for optimal response.

  • Tombol Daya: Turn ARGB lighting On/Off.
  • Tombol Modus: Cycle through different lighting modes and effects.
  • Tombol Kecepatan: Sesuaikan kecepatan efek pencahayaan dinamis.
  • Tombol Kecerahan: Increase or decrease the brightness of the lighting.
  • Tombol Warna: Select static colors or color cycling modes.

5.2. Motherboard ARGB Software Control

If you have connected the control box to your motherboard's 5V 3-pin ARGB header, you can use your motherboard's proprietary software to synchronize and customize the lighting effects. Refer to your motherboard's manual for specific instructions on using its ARGB software.

  • Ensure the ARGB sync cable is properly connected.
  • Install the latest version of your motherboard's RGB control software.
  • Select the appropriate ARGB device within the software to control the fans.

6. Pemeliharaan

Regular maintenance helps ensure optimal performance and longevity of your fans.

  • Pembersihan: Periodically clean the fan blades and frames to remove dust buildup. Use a soft brush or compressed air. Ensure the computer is powered off and unplugged before cleaning.
  • Inspeksi: Check fan cables for any signs of wear or damage. Ensure all connections remain secure.
  • Jangan dilumasi: The fan bearings are sealed and do not require lubrication. Attempting to lubricate them may cause damage.

7. Penyelesaian masalah

If you encounter issues with your Xigmatek Galaxy II Elite AY120 ARGB fans, refer to the following common problems and solutions:

Masalah Kemungkinan Penyebab Larutan
Kipas angin tidak berputar.
  • No power to control box.
  • Loose fan cable connection.
  • Faulty control box or fan.
  • Ensure SATA power cable is securely connected to the control box and PSU.
  • Check all 6-pin fan cables are firmly seated in the control box.
  • Test individual fans if possible. Contact support if components are faulty.
Pencahayaan ARGB tidak berfungsi.
  • No power to control box.
  • Koneksi kabel ARGB longgar.
  • IR remote battery dead or signal blocked.
  • Incorrect motherboard ARGB header connection (e.g., 12V instead of 5V).
  • Motherboard software not configured.
  • Verify SATA power connection to the control box.
  • Check 6-pin fan cables and ARGB sync cable connections.
  • Replace IR remote battery or ensure clear line of sight to control box.
  • Confirm connection to a 5V 3-pin ARGB header only.
  • Ensure motherboard ARGB software is running and configured correctly.
Fans are making unusual noise.
  • Obstruction (cable, dust).
  • Sekrup pemasangan longgar.
  • Faulty fan bearing.
  • Inspect for any cables or debris touching the fan blades.
  • Kencangkan sekrup pemasangan.
  • If noise persists, the fan may be faulty and require replacement.

8. Spesifikasi

Fitur Detil
Nomor Model EN42098
Ukuran Kipas ukuran 120mm
Jenis Pencahayaan RGB yang dapat dialamatkan (ARGB)
Jil.tage 5 Volt
Konektor Daya 6-pin (fan), SATA (control box)
Sinkronisasi Papan Utama 5V 3-pin ARGB Header (compatible with ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync)
Metode Kontrol IR Remote Control, Motherboard Software (via ARGB sync)
Tingkat Kebisingan 1 Anak laki-laki
Dimensi Paket Ukuran 20.1x13.5x10.1 cm
Berat Paket 630 gram

9. Garansi dan Dukungan

Xigmatek products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please refer to the official Xigmatek websitus web atau hubungi penjual lokal Anda. Simpan bukti pembelian Anda untuk klaim garansi.

Untuk bantuan lebih lanjut, silakan kunjungi: www.xigmatek.com