Avaya J100 Wireless Module (700512402) User Manual

1. Pendahuluan

The Avaya J100 Wireless Module (model 700512402) is an optional hardware accessory designed to enhance the connectivity of compatible Avaya J129, J179, and K155 IP Phones. This module provides seamless Wi-Fi and Bluetooth capabilities, allowing for greater flexibility in phone placement and headset usage.

This manual provides essential information for the proper installation, operation, and maintenance of your J100 Wireless Module. Please read these instructions carefully before proceeding with installation or use.

Image 1: Avaya J100 Wireless Module. This image displays the compact design of the module, showing its connectors and casing.

2. Informasi Keselamatan

• Always disconnect the IP Phone from its power source before installing or removing the J100 Wireless Module.
• Handle the module with care to avoid damage to its electronic components.
• Jangan biarkan modul terkena kelembapan, suhu ekstrem, atau sinar matahari langsung.
• Ensure proper ventilation around the IP Phone after installation.
• Only use the module with compatible Avaya IP Phones as specified.

3. Isi Paket

Verifikasi bahwa paket Anda berisi item berikut:

• Avaya J100 Wireless Module (700512402)
• Quick Start Guide or Documentation (if included)

If any items are missing or damaged, please contact your vendor or Avaya support.

4. Pengaturan dan Instalasi

Follow these steps to install the Avaya J100 Wireless Module into your compatible Avaya IP Phone:

1. Matikan Ponsel: Disconnect the power cable from your Avaya J129, J179, or K155 IP Phone.
2. Temukan Slot Modul: Identify the designated slot for the wireless module on the back or side of your IP Phone. This slot is typically covered by a removable panel.
3. Lepaskan Penutup: Carefully remove the cover panel from the module slot. This may involve gently prying it off or unscrewing a small screw, depending on your phone model.
4. Sisipkan Modul: Align the Avaya J100 Wireless Module with the slot and gently insert it until it is fully seated. Ensure the connectors are properly aligned to avoid damage.
5. Modul Keamanan (jika ada): If your phone model requires it, secure the module with any screws that were removed from the cover panel.
6. Ganti Penutup: Reattach the cover panel to the module slot.
7. Menghidupkan Ponsel: Reconnect the power cable to your IP Phone. The phone will power on and automatically detect the newly installed J100 Wireless Module.

Once the phone powers on, it should recognize the module, and you will be able to configure Wi-Fi and Bluetooth settings through the phone's menu.

5. Petunjuk Pengoperasian

5.1. Konektivitas Wi-Fi

To connect your Avaya IP Phone to a Wi-Fi network:

1. Access the phone's menu and navigate to the "Settings" or "Network" options.
2. Select "Wi-Fi" or "Wireless Settings."
3. Enable Wi-Fi if it is not already active.
4. The phone will scan for available Wi-Fi networks. Select your desired network from the list.
5. Enter the Wi-Fi password (if required) using the phone's keypad.
6. Confirm the connection. The phone should now be connected to the Wi-Fi network.

5.2. Konektivitas Bluetooth

To pair a Bluetooth headset or other device with your Avaya IP Phone:

1. Ensure your Bluetooth device is in pairing mode (refer to your device's manual for instructions).
2. On your Avaya IP Phone, navigate to the "Settings" or "Bluetooth" menu.
3. Enable Bluetooth if it is not already active.
4. The phone will scan for nearby Bluetooth devices. Select your device from the list.
5. If prompted, enter the pairing code (usually "0000" or "1234" for headsets, or as specified by your device).
6. Confirm the pairing. Once paired, your Bluetooth device should be ready for use with the phone.

Catatan: Some Bluetooth headsets may enter a power-saving mode when not in use, which could lead to a slight delay in call alerts. This is normal behavior for certain devices.

6. Pemeliharaan

• Pembersihan: Use a soft, dry cloth to clean the exterior of the module and the phone. Do not use liquid cleaners or aerosols.
• Penyimpanan: If removing the module for extended periods, store it in a cool, dry place, away from direct sunlight and extreme temperatures.
• Pembaruan Firmware: Ensure your Avaya IP Phone's firmware is up to date, as this can improve module performance and compatibility. Refer to your phone's documentation or Avaya support for firmware update procedures.

7. Penyelesaian masalah

8. Spesifikasi

• Nomor Model: 700512402
• Merek: tersedia
• Perangkat yang Kompatibel: Avaya J129, Avaya J179, Avaya K155 IP Phones
• Antarmuka Perangkat Keras: Bluetooth, Ethernet (via phone connection)
• Protokol Tautan Data: Bluetooth, Ethernet (via phone connection)
• Kecepatan Transfer Data: Up to 100 Megabits Per Second (via Ethernet, module provides wireless)
• Berat Barang: Sekitar 1.13 ons (32 gram)
• Dimensi Paket: Sekitar 4.96 x 3.11 x 1.73 inci
• Pertama Tersedia: 18 Juli 2019

9. Garansi dan Dukungan

For warranty information, please refer to the documentation provided with your original Avaya IP Phone or contact your authorized Avaya reseller. Avaya provides technical support for its products. For assistance, visit the official Avaya support websitus atau hubungi departemen layanan pelanggan mereka.

You can find more information and support resources on the official Avaya weblokasi: www.avaya.com/support