Panduan Instruksi Lampu Langit-langit Sensor Gerak TOOWELL

1. Pendahuluan

Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.

2. Produk Lebihview

Fitur Utama

Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
Kecerahan: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
Nirkabel & Mudah Dipasang: No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.

Apa yang ada di dalam kotak

1 x Battery powered ceiling light
Mounting hardware (screws, anchors, fixing plug)
Baterai TIDAK termasuk.

Gambar Produk

TOOWELL Motion Sensor Ceiling Light with motion sensor visible — The TOOWELL Motion Sensor Ceiling Light, showcasing its sleek design and integrated motion sensor.

Key features of the TOOWELL Motion Sensor Ceiling Light including lumens, motion activation, auto-off, and battery life — Sebuah selesaiview of the light's key features: 400 Lumens, 19ft motion activated, 20 seconds auto-off, and 180 days long-lasting battery life.

Diagram showing easy no-wire installation and battery compartment for 4 D-cell batteries — Illustration of the easy, no-wire installation process, highlighting the compartment for 4 D-cell batteries (not included).

Comparison of Daylight Mode and Night Mode operation for the motion sensor light — Visual representation of the Daylight Mode (motion activates light all day) and Night Mode (motion activates light only in darkness) settings.

Examples of the motion sensor light used in a closet, pantry, bathroom, and laundry room — Berbagai aplikasi contohamples, showing the light installed in a closet, pantry, bathroom, and laundry room.

Diagram illustrating the 120-degree detection angle and 19ft maximum detection range of the motion sensor — Detailed diagram showing the 120-degree detection angle and maximum 19ft detection range of the motion sensor.

3. Pengaturan dan Instalasi

The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:

Prepare the Light: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
Pasang Baterai: Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.

Diagram showing how to insert 4 D-cell batteries into the light unit — Insert 4 D-cell batteries into the designated slots, ensuring correct polarity.

Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.

Diagram showing how to twist the back plate to secure it to the light unit — Twist the back plate clockwise until it locks securely into place.

Pasang Pelat Dasar: Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.

Diagram showing the mounting plate being screwed into a ceiling — Securely screw the mounting plate to your desired ceiling or wall location using the provided hardware.

Attach the Light Unit: Align the light unit with the mounted base plate and twist clockwise until it clicks into place.

Diagram showing the light unit being twisted onto the mounted plate — Attach the light unit to the mounted plate by twisting it clockwise until it locks.

Hapus Film Pelindung: Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.

4. Petunjuk Pengoperasian

Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:

Mode Cahaya Siang: Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.

The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.

5. Pemeliharaan

Penggantian Baterai: When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
Pembersihan: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
Umur LED: The integrated LED lights are designed for a long lifespan and do not require replacement.

6. Penyelesaian masalah

Masalah	Kemungkinan Penyebab	Larutan
Lampu tidak menyala.	1. Baterai sudah habis atau terpasang dengan tidak benar. 2. Light mode is set incorrectly for ambient light conditions. 3. Tidak ada gerakan yang terdeteksi dalam jangkauan.	1. Replace batteries and ensure correct polarity. 2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode. 3. Ensure motion is within 20 feet and 120-degree detection angle.
Lampu tetap menyala terus-menerus.	1. Gerakan berkelanjutan terdeteksi. 2. Light mode is set to 'Daylight' in a constantly bright area.	1. Ensure no continuous motion is within the sensor's range. 2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness.
Cahayanya redup.	Baterai lemah.	Ganti keempat baterai D-cell tersebut.
Motion sensor is not responsive.	1. Sensor is obstructed or dirty. 2. Incorrect installation height.	1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor. 2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft).

7. Spesifikasi

Spesifikasi	Nilai
Merek	TERLALU BAIK
Model	Update Daylight Motion Sensor Light
Jenis Sumber Cahaya	LED (SMD2835)
Kecerahan	400 lumen cahaya
Suhu Warna	5000 Kelvin
Sumber Daya	4 D-cell Batteries (Not Included)
Sudut Sensor Gerak	120 derajat
Rentang Deteksi Gerakan	Hingga 20 kaki
Timer Mati Otomatis	20 detik (setelah tidak ada gerakan)
Dimensi Produk	7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H)
Berat Barang	14.4 ons
Bahan	Akrilonitril Butadiena Stirena (ABS)
Jenis Instalasi	Siram gunung
Penggunaan Dalam/Luar Ruangan	Hanya untuk penggunaan di dalam ruangan

8. Garansi dan Dukungan

Informasi Garansi

Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.

Dukungan Pelanggan

If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL weblokasi.

When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.

TOOWELL Update Daylight Motion Sensor Light