LEKATO 9V AC/DC Pedal Power Supply Adapter User Manual

Perkenalan

Thank you for choosing the LEKATO 9V AC/DC Pedal Power Supply Adapter. This adapter is designed to provide stable and reliable power to most instrument pedals and other 9-volt battery devices, ensuring consistent, battery-free performance. This manual provides essential information for the proper setup, operation, and maintenance of your power supply.

LEKATO 9V AC/DC Pedal Power Supply Adapter, a compact black power brick with a DC barrel connector cable.

Image: The LEKATO 9V AC/DC Pedal Power Supply Adapter.

Fitur Utama

Stable Power Conversion: Converts AC wall power to 9-Volt DC, suitable for a wide range of guitar effect pedals and 9-volt devices.
Manufaktur Berkualitas: Produced in a state-of-the-art facility, adhering to stringent quality controls for durability and performance.
Kinerja yang Konsisten: Ensures reliable, battery-free operation for your devices.
Kompatibilitas Luas: Designed for broad compatibility with various effect pedals. Refer to your device's specifications for exact power requirements.
Professional Noise Isolation: Engineered to minimize unwanted noise, providing a clean power source for your audio equipment.
Perlindungan Keamanan: Includes over-charge, short circuit, temperature, over-voltage, over-current, and overload protection for enhanced safety.

LEKATO Pedal Power Supply with icons for various protections like over-charge, short circuit, temperature, over-voltage, over-current, and overload protection.

Image: LEKATO Pedal Power Supply highlighting its multiple safety features.

Petunjuk Pengaturan

Buka kemasan Adaptor: Carefully remove the LEKATO 9V AC/DC Pedal Power Supply Adapter from its packaging.
Verifikasi Kompatibilitas Perangkat: Before connecting, ensure your device requires a 9V DC power input with a center-negative polarity. The adapter features a 5.5mm*2.1mm barrel connector.
Hubungkan ke Perangkat: Insert the barrel connector of the power supply into the DC input jack of your effect pedal or 9-volt device.
Colokkan ke Stopkontak: Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC, 50/60Hz).
Nyalakan: Once connected, your device should receive power. Observe any indicator lights on your pedal to confirm it is powered on.

Close-up of the power adapter's barrel connector with a diagram showing central negative polarity.

Image: Ensure your device requires central negative polarity (5.5mm*2.1mm barrel connector).

Image showing the extended 5.0 feet cord of the power adapter.

Image: The adapter features an extended 5.0 feet cord for flexible placement.

Petunjuk Pengoperasian

The LEKATO 9V AC/DC Pedal Power Supply Adapter is designed for simple plug-and-play operation. Once connected as per the setup instructions, your compatible device will receive continuous power.

Daya Keluaran: The adapter provides a stable 9V DC output with 1000mA (1A) current, suitable for devices requiring up to 1A.
Masukan Voltage: Compatible with universal input voltage from 100-240V AC, 50/60Hz, making it suitable for international use with appropriate plug adapters (not included).
Pengurangan Kebisingan: The adapter incorporates professional noise isolation to ensure a clean audio signal from your pedals.

Image showing the power adapter with its output specifications: 9V DC 1000mA and input: 100-240V ~ 50/60Hz, 400mA.

Image: Power Watt Compatibility details for the adapter.

Various guitar pedals from different brands connected in a circle, illustrating wide compatibility.

Image: Wide compatibility with various effect pedals.

Video Demonstration: LEKATO Guitar Looper Pedal Set

Video: This video demonstrates the LEKATO Guitar Looper Pedal Set, which can be powered by this 9V AC/DC adapter. It showcases the pedal's functionality and how it integrates into a guitar setup.

Pemeliharaan

Pembersihan: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
Penyimpanan: Store the adapter in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
Perawatan Kabel: Do not bend or crimp the power cord excessively. Avoid placing heavy objects on the cord.
Inspeksi: Periksa adaptor dan kabel secara berkala untuk melihat tanda-tanda kerusakan, seperti kabel yang terkelupas atau retak.asing. If damage is found, discontinue use and replace the adapter.

Penyelesaian Masalah

Masalah	Kemungkinan Penyebab	Larutan
Perangkat tidak menyala.	Adaptor tidak terpasang dengan benar. Device incompatible with 9V DC or center-negative polarity. Stopkontak yang rusak. Adaptor atau kabel rusak.	Ensure adapter is securely plugged into both the device and the wall outlet. Periksa kebutuhan daya perangkat Anda (volt).tage, current, polarity) match the adapter's specifications. Test the power outlet with another working appliance. Inspect the adapter and cable for damage. Replace if necessary.
Suara bising atau dengungan yang berlebihan.	Interferensi loop tanah. Gangguan dari perangkat elektronik lainnya. Kabel atau sambungan rusak.	Pastikan semua kabel audio terlindungi dan terhubung dengan benar. Try plugging the adapter into a different outlet or power strip. Move the adapter away from other electronic devices that may cause interference. Lakukan pengujian dengan kabel audio yang berbeda.
Adaptor terasa panas.	Operasi normal (sedikit hangat). Beban lebih atau hubungan arus pendek. Ventilasi yang buruk.	Sedikit rasa hangat adalah hal yang normal. If excessively hot, disconnect immediately. Check for short circuits in your pedal chain or if the device draws more current than the adapter provides (1000mA). Ensure the adapter is in a well-ventilated area.

Spesifikasi

Merek: LEKATO
Nama Model: M01696Inggris
Masukan: 100-240V AC, 50/60Hz, 400mA
Keluaran: 9V DC, 1000mA (1A)
Polaritas: Pusat Negatif
Tipe Konektor: DC Barrel Connector (5.5mm x 2.1mm)
Panjang Kabel: Sekitar 5.0 kaki
Fitur Khusus: Short Circuit Protection, Over-charge Protection, Temperature Protection, Over-voltage Protection, Over-current Protection, Overload Protection
Perangkat yang Kompatibel: Effect Pedals, 9-Volt Battery Devices
Bahan: Plastik atau Logam
Berat Barang: 2.89 ons
Dimensi Paket: 4.02x3.07x2.6 inci
UPC-nya: 793811852394
ASIN: B07VXGHRSS

Informasi Garansi

This product is covered by a standard return policy. For specific warranty details and duration, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

Return Policy Duration: 30 hari (pengembalian dana/penggantian)

Dukungan Pelanggan

For any questions, technical assistance, or support regarding your LEKATO Pedal Power Supply Adapter, please contact the seller or LEKATO customer service. You can often find contact information on the product packaging or the seller's storefront.

Penjual: WSZCH

Visit the LEKATO Store: LEKATO Store on Amazon

	Panduan Tanya Jawab dan Pemecahan Masalah LEKATO M01698 3 Slot Auto Looper Panduan FAQ dan pemecahan masalah komprehensif untuk LEKATO M01698 3 Slots Auto Looper, yang mencakup masalah umum seperti suara klik, persyaratan catu daya, dan pembaruan firmware.
	Panduan Pengguna Pedal Looper Gitar LEKATO LOOP AUTO Comprehensive user manual for the LEKATO LOOP AUTO guitar looper pedal, detailing features, operation, connection methods, and troubleshooting. Learn how to maximize your creative potential with unlimited overdubs, sync function, and WAV file ekspor Impor.
	Panduan Pengguna Efek Gitar Looper Pro - LEKATO Panduan pengguna lengkap untuk efek gitar LEKATO Looper Pro. Pelajari tentang kualitas audio 48K/24bit, kapasitas perekaman 40 menit, 9 loop, tuner bawaan, dan konektivitas USB untuk WAV. file import/export, and detailed operation instructions. Ideal for guitarists seeking professional looping capabilities.
	Buku Panduan Pengguna LEKATO MINI LOOPER - Fitur, Instruksi & Spesifikasi Panduan pengguna lengkap untuk LEKATO MINI LOOPER, yang merinci fitur-fiturnya, petunjuk panel kontrol, panduan pengoperasian, dan spesifikasi teknis. Pelajari cara merekam, memutar ulang, dan mengelola loop audio.
	Panduan Pembaruan Firmware Seri LEKATO Guitar Looper Petunjuk untuk memperbarui firmware pada Seri LEKATO Guitar Looper Anda guna mengatasi masalah suara tick. Termasuk langkah-langkah untuk mengunduh aplikasi CubeSuite dan melakukan pembaruan OTA.
	Panduan Pemilik Prosesor Efek Gitar LEKATO TANK-G Panduan lengkap untuk Prosesor Efek Gitar LEKATO TANK-G, yang merinci fitur, fungsi, dan pengoperasiannya. Termasuk informasi tentang preset, mode live, modul efek, parameter teknis, dan unduhan perangkat lunak.

LEKATO M01696UK