1. Pendahuluan
Thank you for choosing the ANSMANN FL1600R 20W Cordless LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.
The ANSMANN FL1600R is designed for various craft activities, offering a balance of performance and mobility. Its compact design, battery operation, and high light output ensure comfortable and efficient work.
2. Petunjuk Keselamatan
Selalu perhatikan tindakan pencegahan keselamatan berikut untuk mencegah cedera atau kerusakan pada produk:
- Do not look directly into the LED light source when it is active, as this may cause eye damage.
- Jauhkan perangkat dari jangkauan anak-anak.
- Jangan membuka atau memodifikasi perangkat. Perbaikan hanya boleh dilakukan oleh personel yang berkualifikasi.
- Use only the original power supply unit provided with the device for charging.
- Ensure the work light is placed on a stable surface to prevent it from tipping over.
- Jangan mengoperasikan perangkat jika terlihat rusak.
- The work light is IP54 rated for protection against dust and splashing water. Do not immerse it in water.
- Operate the device within the specified temperature range of -20 °C to 50 °C.
3. Isi Paket
Silakan periksa paket untuk item berikut:
- 1x ANSMANN FL1600R 20W Cordless LED Work Light (approx. 1440 g)
- 1x Power Supply Unit (12 V/1000 mA – European plug)
- 1x Panduan Pengguna
4. Produk Lebihview
The ANSMANN FL1600R features a robust design with a blue frame and a black light housing. It includes an integrated stand for flexible positioning and a handle for portability.
Gambar 1: Depan view of the ANSMANN FL1600R 20W Cordless LED Work Light, highlighting its blue frame and black LED housing.
5. Pengaturan
The ANSMANN FL1600R is designed for immediate use. No complex assembly is required.
- Membongkar: Carefully remove the work light and all accessories from the packaging.
- Penempatan: Place the work light on a stable, flat surface using its integrated adjustable stand. The stand allows for flexible angling of the light.
- Pemasangan Opsional: The work light features an integrated tripod mount for use with compatible tripods (sold separately). It can also be mounted using a wall-mount bracket (see Figure 2).
Figure 2: Illustration of mounting options, including a tripod stand and wall-mount bracket (accessories sold separately).
6. Petunjuk Pengoperasian
The work light offers three illumination levels for various needs.
- Daya Hidup/Mati: Locate the power button, typically on the back or side of the light housing. Press once to turn on the light.
- Menyesuaikan Kecerahan: Subsequent presses of the power button will cycle through the brightness levels:
- 25% Kecerahan: Approximately 400 lumens, providing up to 10 hours of illumination.
- 50% Kecerahan: Approximately 800 lumens, providing up to 6 hours of illumination.
- 100% Kecerahan: Approximately 1600 lumens, providing up to 3 hours of illumination.
- Matikan: After cycling through all brightness levels, pressing the button again will turn off the work light.
Figure 3: Icons illustrating the key features: 20W power, 1600 lumens output, rechargeable battery, and three dimming levels.
Figure 4: The work light in a typical workshop application, demonstrating its portability and utility.
7. Mengisi Baterai
The ANSMANN FL1600R is equipped with a rechargeable Lithium-ion battery.
- Hubungkan Pengisi Daya: Plug the provided power supply unit into the charging port on the work light. Then, connect the power supply to a suitable wall outlet.
- Indikator Pengisian Daya: The work light typically has an indicator light that shows the charging status. Refer to the specific indicator behavior in the product's quick start guide if available.
- Waktu Pengisian: A full charge for the 32.6 Wh battery takes approximately 4 to 5 hours.
- Pengoperasian Selama Pengisian Daya: Jika lamp is switched on while charging, its brightness will be reduced to 50% to prioritize charging efficiency and prevent overheating.
8. Pemeliharaan
Perawatan yang tepat memastikan umur panjang dan kinerja optimal lampu kerja Anda.
- Pembersihan: Clean the exterior of the work light with a soft, damp Gunakan kain. Jangan gunakan pembersih abrasif atau pelarut. Pastikan port pengisian daya bebas dari debu dan kotoran.
- Penyimpanan: When not in use for extended periods, store the work light in a cool, dry place. It is recommended to charge the battery every 3-6 months to maintain its health.
- Perawatan Baterai: The integrated Lithium-ion battery is not user-replaceable. Do not attempt to open the battery compartment.
9. Penyelesaian masalah
If you encounter issues with your ANSMANN FL1600R, refer to the following common problems and solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu tidak menyala. | Baterai habis. | Isi daya baterai menggunakan catu daya yang disediakan. |
| Cahaya redup atau berkedip-kedip. | Daya baterai rendah. | Isi ulang baterainya. |
| Pengisian daya tidak dimulai. | Power supply not properly connected or faulty. | Ensure the power supply is securely connected to both the light and the wall outlet. Try a different outlet. Verify the power supply is not damaged. |
| Brightness reduced during charging. | Operasi normal. | This is an intended feature to protect the battery and charging circuit. Full brightness resumes once charging is complete and the charger is disconnected. |
If the problem persists after attempting these solutions, please contact ANSMANN customer support.
10. Spesifikasi Teknis
| Fitur | Spesifikasi |
|---|---|
| Nomor Model | Nomor telepon 1600-0275 |
| Merek | ANSMANN |
| Kekuatan | 20 Watt |
| Fluks Bercahaya | 1600 lumen (maks) |
| Illumination Levels | 25% (400 lm, 10h), 50% (800 lm, 6h), 100% (1600 lm, 3h) |
| Suhu Warna | 5000 Kelvin (Putih Siang Hari) |
| Indeks Renderasi Warna (CRI) | > 80 |
| Jenis Baterai | 4x Lithium-ion (included), 32.6 Wh |
| Waktu Pengisian Daya | 4-5 jam |
| Masukan Voltage | 12 Volts (via power supply) |
| Peringkat Perlindungan | IP54 (Terlindung dari debu dan cipratan air) |
| Suhu Operasional | -20 °C hingga 50 °C |
| Dimensi (P x L x T) | Ukuran 8.5x28.5x27.5 cm |
| Berat | 1.48 kg (1485 g) |
| Bahan | Logam |
| Umur Rata-rata | 50,000 Jam |
| Label Energi | F (as per EU Energy Label) |
Figure 5: Key features of the work light, including 5000K daylight white, CRI > 80, temperature resistance, and IP54 rating.
Figure 6: EU Energy Label for the product, indicating an energy efficiency class of F. For more details, refer to the Basis data EPREL.
11. Garansi dan Dukungan
ANSMANN provides a Garansi pabrik 10 tahun for this product, excluding the battery. The battery is subject to standard warranty terms for rechargeable batteries.
For warranty claims, technical support, or spare parts availability, please contact your retailer or ANSMANN customer service directly. Availability of spare parts is guaranteed for 1 year.
Harap siapkan nomor model Anda (1600-0275) dan bukti pembelian saat menghubungi dukungan.
12. Informasi Lingkungan
Do not dispose of the device or its battery with household waste. Electronic devices and batteries must be collected separately and recycled in an environmentally sound manner. Please use the return and collection systems available in your country for disposal.
