Panduan Pengguna Switch PoE 10 Port YuanLey YS082G-P

1. Pendahuluan

This manual provides detailed instructions for the YuanLey YS082G-P 10-Port PoE Switch. This unmanaged network switch is designed for various applications, offering 8 Power over Ethernet (PoE+) ports and 2 Gigabit uplink ports for efficient network connectivity and power delivery.

Gambar 1.1: Depan view of the YuanLey YS082G-P 10-Port PoE Switch.

2. Fitur Utama

• Konfigurasi Port: Features 8 PoE ports (10/100Mbps) and 2 Gigabit uplink Ethernet ports (1000Mbps) for high-bandwidth connections.
• Kekuasaan melalui Ethernet (PoE+): Supports IEEE 802.3af/at standards with a maximum total power budget of 120W, delivering up to 30W per port.
• Pasang dan Mainkan: Unmanaged switch design allows for automatic device detection and requires no configuration for easy setup.
• Memperpanjang Fungsi: Enables single PoE ports to support transmission distances up to 250m at 10Mbps when activated.
• Dukungan VLAN: Ports 1-8 support VLAN isolation to reduce network congestion and enhance security.
• Desain Tahan Lama: Constructed with a metal case for bilateral heat dissipation, fanless operation for quiet performance, and 4KV lightning protection.
• Suhu Operasional Lebar: Designed to operate reliably in environments ranging from -10°C to +55°C.

Image 2.1: Port configuration showing 8 PoE ports (10/100Mbps) and 2 Gigabit uplink ports (1000Mbps).

Image 2.2: Diagram illustrating the One Key VLAN function, isolating ports 1-8 while allowing communication with uplink ports.

Image 2.3: Comparison of Extend Mode (250m, 10Mbps) and Default Mode (100m, 100Mbps) for PoE transmission.

Gambar 2.4: Selesaiview of the switch's unmanaged features including metal case, plug and play, 4KV lightning protection, and 12 Gbps switching capacity.

Image 2.5: Illustration of the switch's fanless design and wide operating temperature range (-10°C to +55°C).

3. Isi Paket

Verifikasi bahwa semua item ada dalam paket:

• YuanLey YS082G-P 10-Port PoE Switch
• Kabel Listrik
• Mounting Brackets (for rackmount or wall mount)
• Sekrup untuk pemasangan
• Panduan Memulai Cepat

4. Petunjuk Penyiapan

The YuanLey YS082G-P is a plug-and-play unmanaged switch, requiring minimal setup.

1. Hubungkan Daya: Plug the provided power cord into the AC IN port on the back of the switch and then into a standard electrical outlet. The Power LED on the front panel should illuminate.
2. Hubungkan Uplink: Connect your router or main network device to one of the two Gigabit uplink ports (ports 9 or 10) using a standard Ethernet cable.
3. Hubungkan Perangkat PoE: Connect your PoE-compatible devices (e.g., IP cameras, wireless access points, IP phones) to any of the 8 PoE ports (ports 1-8) using Ethernet cables. The switch will automatically detect and power these devices.
4. Pemasangan (Opsional): Use the included mounting brackets and screws to install the switch in a 19-inch rack or mount it on a wall.

Image 4.2: Visual guide for the simple plug-and-play setup process: Connect to Power, Connect Devices, and Enjoy.

Image 4.3: Illustration of the rackmount design and included brackets for installation.

5. Mode Operasi

The switch features a mode switch on the front panel to select between Default and Extend modes.

• Modus Default: In this mode, all ports operate at their standard speeds (10/100Mbps for PoE ports, 1000Mbps for uplink ports) with a maximum transmission distance of 100 meters.
• Perpanjang Mode: When the switch is set to Extend mode, PoE ports 1-8 can transmit data and power up to 250 meters, but the speed for these ports will be reduced to 10Mbps. This mode is ideal for long-distance deployments of devices like IP cameras where higher bandwidth is not critical.
• VLAN Functionality: The switch supports VLAN isolation on ports 1-8. When enabled, these ports are isolated from each other but can still communicate with the uplink ports (9-10). This helps in segmenting the network, reducing broadcast storms, and improving overall network security and performance.

Image 5.1: The physical switch for selecting between Default and Extend modes.

Image 5.2: Diagram illustrating the functionality of One Key VLAN and the Extend mode for longer PoE distances.

6. Pemeliharaan

To ensure optimal performance and longevity of your YuanLey PoE Switch:

• Keep the device in a well-ventilated area to prevent overheating. The fanless design relies on natural convection.
• Periksa kabel secara berkala untuk mengetahui adanya kerusakan dan pastikan sambungan aman.
• Clean the exterior of the switch with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
• Pastikan sumber daya listrik stabil dan berada dalam tegangan yang ditentukan.tagRentang (AC 100-240V).

7. Penyelesaian masalah

8. Spesifikasi

9. Garansi dan Dukungan

For any questions, technical assistance, or warranty inquiries, please contact YuanLey official support. Refer to the product packaging or the official YuanLey websitus untuk informasi kontak terkini.