Diono Radian 3R Convertible Car Seat Instruction Manual

Perkenalan

The Diono Radian 3R is an all-in-one convertible car seat designed for children from 5 to 120 pounds, adapting from rear-facing to forward-facing with a harness, and finally to a high-back booster. Engineered with a steel-reinforced frame, it offers extended rear-facing capability up to 50 pounds. Its slim-fit design allows for three-across seating in most vehicles. The Radian 3R also features a SuperLATCH system for secure installation, a foldable design for portability, machine-washable covers, and is FAA approved for airline use.

Apa yang ada di dalam kotak

• Radian® 3R Car Seat
• Detachable Rear-Facing Base
• Foam Harness Pads
• Lap Belt Cushion
• Safe Stop® Energy Absorbing Harness
• Rear-Facing Top Tether
• Manual Instruksi

Fitur Produk

• 10 Years, One Car Seat: Designed to grow with your child from 5 to 120 lbs, offering 4 modes in 1 seat.
• Extended Rear-Facing: Safely accommodates children rear-facing up to 50 lbs.
• Desain Slim-Fit: Allows for three-across installation in most vehicles without compromising safety or comfort.
• Rangka yang Diperkuat Baja: Mechanically engineered with automotive-grade high-strength steel for enhanced protection.
• ComfortPlus Memory Foam: Included for superior comfort.
• Portabel & Ramah Perjalanan: Features an original fold for easy transport and storage, and is FAA approved for airline use.
• Perawatan Mudah: Removable, machine-washable covers for convenient cleaning.

Pengaturan dan Instalasi

Proper installation is crucial for child safety. Always refer to the detailed instructions in the included manual and your vehicle's owner's manual.

Mode Instalasi

Gambar: The Diono Radian 3R car seat demonstrating its four usage modes: newborn rear-facing (from 2.3 kg), extended rear-facing (up to 22.7 kg), forward-facing with harness (10-29 kg), and high-back booster (18-54 kg).

Gambar: Three Diono Radian 3R car seats installed side-by-side in a vehicle's back seat, showcasing the slim-fit design that allows for three-across seating.

Bracing for Rear-Facing Installation

When installing the Radian 3R in a rear-facing position, bracing refers to the car seat touching the vehicle seat in front of it. Diono allows bracing, but it is essential to check your vehicle's manual (typically in the airbag section) to ensure it does not prohibit any contact or pressure on the vehicle seat, which could interfere with airbag sensors. If your vehicle manual does not prohibit it, bracing is acceptable. Ensure there is enough space to fit a pencil between the car seat and the vehicle seat to account for the child's weight.

LATCH System Installation

The SuperLATCH system (UAS Compatible) simplifies installation. For rear-facing, extend the LATCH/UAS strap, place the car seat in the back seat, slide the strap through the rear-facing belt path, and attach the connectors to the vehicle's LATCH anchors. Tighten the strap by pressing down firmly in the center of the car seat while pulling the strap. For forward-facing, you can use the LATCH system and the top tether. Ensure the car seat is installed securely with no more than 1 inch of movement side-to-side or front-to-back at the belt path.

Gambar: Detailed dimensional diagram of the Diono Radian 3R car seat, showing key measurements for installation and fit, including internal and external widths, harness heights, and folded dimensions.

Petunjuk Pengoperasian

Penyesuaian Harness

The 5-point harness system is adjustable to accommodate your child's growth. Ensure the harness straps are at or below the child's shoulders for rear-facing and at or above the child's shoulders for forward-facing. The buckle is designed for easy use, and the included foam harness pads prevent rubbing against the child's neck.

Mode Penguat

Once your child meets the weight and height requirements for booster mode, the internal harness can be stored, and the vehicle's lap and shoulder belt can be used with the car seat. The car seat's design ensures proper belt positioning for older children.

Pemeliharaan

• Meliputi: Machine wash cold and line dry.
• Shell and Components: Bersihkan noda dengan sabun lembut dan air.
• Regularly inspect the car seat for any signs of wear or damage to the straps, buckles, or frame.

Penyelesaian Masalah

If you encounter any issues with installation or usage, first consult the detailed instruction manual provided with your car seat. Ensure all straps are correctly routed and tightened, and that the car seat does not move more than 1 inch at the belt path. For specific concerns, refer to the manufacturer's support resources.

Spesifikasi

Garansi dan Dukungan

For warranty information, product registration, or customer support, please visit the official Diono webKunjungi situs web mereka atau hubungi departemen layanan pelanggan mereka. Simpan bukti pembelian dan nomor seri produk Anda untuk keperluan pertanyaan apa pun.