Perkenalan
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell TC-ID 720/1 E Impact Drill. Please read these instructions carefully before using the tool and keep them for future reference.
The Einhell TC-ID 720/1 E is a powerful impact drill designed for various drilling tasks in different materials. It features two functions (drilling and impact drilling), electronic speed control, forward and reverse rotation, and an ergonomic design for comfortable use.
Gambar 1: Einhell TC-ID 720/1 E Impact Drill. This image shows the complete drill assembly with the auxiliary handle and depth stop attached.
Petunjuk Keselamatan
Always observe general safety regulations when using power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Kenakan peralatan pelindung diri yang sesuai, termasuk kacamata keselamatan, pelindung pendengaran, dan sarung tangan.
- Pastikan benda kerja terpasang dengan aman clamped atau diadakan.
- Jaga agar area kerja tetap bersih dan terang.
- Jangan mengoperasikan perkakas listrik di lingkungan yang mudah meledak, seperti di dekat cairan, gas, atau debu yang mudah terbakar.
- Jauhkan anak-anak dan orang di sekitar saat mengoperasikan perkakas listrik.
- Cabut steker dari sumber listrik sebelum melakukan penyesuaian, mengganti aksesori, atau menyimpan perkakas listrik.
- Jangan memaksakan penggunaan perkakas listrik. Gunakan perkakas listrik yang tepat untuk aplikasi Anda.
- Memelihara alat-alat listrik. Periksa ketidaksejajaran atau pengikatan bagian yang bergerak, kerusakan bagian, dan kondisi lain yang dapat mempengaruhi pengoperasian perkakas listrik.
Komponen Lebihview
Familiarize yourself with the main components of your impact drill:
- Chuck Tanpa Kunci: For quick and easy bit changes (1.5 - 13 mm).
- Pegangan Bantu: Memberikan cengkeraman dan kontrol tambahan.
- Pemberhentian Kedalaman: For precise drilling depth adjustment.
- Panggilan Kontrol Kecepatan: Adjusts drilling speed for different materials.
- Function Selector Switch: Toggles between drilling and impact drilling modes.
- Sakelar Maju/Mundur: Changes rotation direction for drilling and screwdriving.
- Tombol Pengunci: Untuk pengoperasian terus-menerus.
- Softgrip Surfaces: Untuk penanganan yang nyaman dan aman.
Gambar 2: Keyless Chuck. This image highlights the 13mm keyless chuck, allowing for quick and tool-free bit changes.
Gambar 3: Depth Stop. This image shows the adjustable metal depth stop, used to control drilling depth precisely.
Pengaturan
- Memasang Pegangan Tambahan: Loosen the auxiliary handle by twisting it counter-clockwise. Slide it over the chuck and position it to your preferred angle for optimal control. Tighten it securely by twisting clockwise.
- Memasang Penghenti Kedalaman: Insert the depth stop rod into the hole on the auxiliary handle. Adjust its position to the desired drilling depth and secure it by tightening the screw on the auxiliary handle.
- Inserting a Drill Bit:
- Pastikan bor dicabut dari sumber listrik.
- Twist the front part of the keyless chuck counter-clockwise to open the jaws.
- Masukkan mata bor sepenuhnya ke dalam chuck.
- Twist the front part of the chuck clockwise to securely tighten the jaws around the drill bit. Ensure the bit is centered and firmly held.
Petunjuk Pengoperasian
1. Memilih Mode Operasi
- Modus Pengeboran: For wood, metal, plastic, and soft materials. Set the function selector switch to the drill symbol.
- Mode Pengeboran Impak: For concrete, masonry, and hard materials. Set the function selector switch to the hammer symbol.
Gambar 4: Two Functions Icon. This icon indicates the drill's capability for both standard drilling and impact drilling.
2. Mengatur Kecepatan
The electronic speed control allows you to adjust the drilling speed according to the material and application. Use the speed control dial to pre-select the maximum speed, and the trigger switch to vary the speed during operation.
Gambar 5: Speed Control Dial. This image shows the dial for adjusting the maximum rotational speed of the drill.
Gambar 6: Speed Electronics Icon. This symbol represents the electronic speed control feature of the drill.
3. Rotasi Maju/Mundur
Use the forward/reverse switch to select the direction of rotation. Forward rotation is for drilling and tightening screws, while reverse rotation is for loosening screws or extracting jammed drill bits.
4. Drilling Procedure
- Ensure the correct drill bit is installed and the auxiliary handle and depth stop are adjusted.
- Select the appropriate operating mode (drilling or impact drilling).
- Plug the drill into a suitable power outlet.
- Hold the drill firmly with both hands, ensuring a stable stance.
- Position the drill bit on the desired drilling point.
- Gently press the trigger switch to start drilling. Apply steady, even pressure.
- Untuk pengoperasian terus menerus, tekan tombol pengunci sambil menekan pelatuk. Untuk melepaskan, tekan pelatuk lagi.
- Once drilling is complete, release the trigger switch and wait for the drill bit to stop rotating before withdrawing it from the workpiece.
Gambar 7: Operating the Drill. This image shows a user demonstrating proper two-handed grip and technique while drilling into a wall.
Pemeliharaan
Regular maintenance ensures the longevity and optimal performance of your impact drill.
- Pembersihan: After each use, clean the tool housing with a soft, damp cloth. Do not use harsh cleaning agents or solvents. Keep ventilation openings clear of dust and debris.
- Perawatan Chuck: Bersihkan rahang chuck secara berkala untuk memastikan mata bor mencengkeram dengan benar.
- Sikat Karbon: If the motor sparks excessively, the carbon brushes may need inspection or replacement. This should be performed by qualified personnel.
- Penyimpanan: Simpan bor di tempat yang kering dan aman, jauh dari jangkauan anak-anak.
- Inspeksi Kabel: Regularly inspect the power cord for any damage. If damaged, have it repaired by a qualified electrician.
Penyelesaian Masalah
Berikut ini beberapa masalah umum dan solusi potensialnya:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Bor tidak dimulai. | No power supply; faulty power cord; defective switch. | Check power connection; inspect power cord; contact service center. |
| Mata bor terlepas dari penjepitnya. | Chuck not tightened sufficiently; chuck jaws worn. | Tighten chuck firmly; replace chuck if worn. |
| Getaran atau kebisingan yang berlebihan. | Bent drill bit; loose components; internal defect. | Replace bent bit; check for loose parts; contact service center. |
| Mesin bor terlalu panas. | Overloading; blocked ventilation slots. | Reduce load; clear ventilation slots; allow tool to cool. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
Spesifikasi
| Fitur | Nilai |
|---|---|
| Merek | Di neraka |
| Nomor Model | 4259848 |
| Masukan Daya | 720 Watt |
| Jil.tage | 230 Volt |
| Ampmarah | 4.3 Sebuah |
| Kecepatan Tanpa Beban | 2800rpm |
| Chuck Size (max) | 13 mm |
| Kapasitas Pengeboran (Kayu) | 30 mm |
| Kapasitas Pengeboran (Logam) | 10 mm |
| Kapasitas Pengeboran (Beton) | 13 mm |
| Dimensi Produk (P x L x T) | Ukuran 28.7x8.8x20.8 cm |
| Berat | 2.07 kg |
| Sumber Daya | Listrik Kabel |
| Fitur Khusus | 2 functions: drilling/impact drilling, electronic speed control, forward/reverse rotation |
Gambar 8: Maximum Chuck Size. This icon indicates the drill's maximum chuck capacity of 13mm.
Gambar 9: Wood Drilling Capacity. This icon illustrates a maximum drilling diameter of 30mm in wood.
Gambar 10: Metal Drilling Capacity. This icon illustrates a maximum drilling diameter of 10mm in metal.
Gambar 11: Concrete Drilling Capacity. This icon illustrates a maximum drilling diameter of 13mm in concrete.
Garansi dan Dukungan
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. Einhell products typically come with a manufacturer's warranty against defects in materials and workmanship.
For technical support, spare parts, or service inquiries, please visit the official Einhell website or contact their customer service department. Keep your purchase receipt and model number (TC-ID 720/1 E, 4259848) handy when contacting support.
