1. Pendahuluan
This manual provides essential information for the safe and effective use of the TURCK WKB 3T-4 Cable Assembly. This product is a high-quality industrial cable designed for reliable electrical connections in various applications. Please read this manual thoroughly before installation and operation.
Figure 1: TURCK WKB 3T-4 Cable Assembly featuring a right-angle 1/2-20UNF female connector. The cable is yellow and the connector housing is metallic.
2. Informasi Keselamatan
Always observe the following safety precautions to prevent injury or damage to the product and connected equipment:
- Putuskan Daya: Ensure all power to the system is disconnected before installing, removing, or performing any maintenance on the cable assembly.
- Penanganan yang Tepat: Do not bend, twist, or pull the cable excessively. Avoid sharp edges or abrasive surfaces that could damage the cable jacket.
- Kondisi Lingkungan: Use the cable within its specified voltage, current, and temperature ratings. While rated for indoor/outdoor use, protect connections from direct water ingress unless specifically designed for submersible applications.
- Personil Berkualitas: Pemasangan dan perawatan hanya boleh dilakukan oleh personel yang berkualifikasi dan memahami sistem kelistrikan serta prosedur keselamatan.
- Periksa Sebelum Digunakan: Before each use, visually inspect the cable and connector for any signs of damage, wear, or corrosion. Do not use if damage is observed.
3. Produk Lebihview dan Komponen
The TURCK WKB 3T-4 Cable Assembly is designed for robust industrial connectivity. Key features include:
- Tipe Konektor: Right Angle 1/2-20UNF Female Connector.
- Konfigurasi Kawat: 3-wire cable.
- Panjang Kabel: 4 meters (4M).
- Peringkat Listrik: 4 Amperes (4A), 250 Volts (250V).
- Cable Jacket: AWM PVC (Appliance Wiring Material, Polyvinyl Chloride) for durability and flexibility.
- Warna: Black cable jacket.
- Penggunaan: Cocok untuk aplikasi dalam dan luar ruangan.
4. Pengaturan dan Instalasi
Follow these steps for proper installation of the cable assembly:
- Persiapan: Ensure the mating male connector on your device or system is clean and free of debris. Verify that the system is powered off and de-energized.
- Penyelarasan: Carefully align the right-angle female connector of the WKB 3T-4 cable assembly with the corresponding male connector.
- Koneksi: Gently push the connector together until it seats firmly. The right-angle design allows for connections in confined spaces.
- Koneksi Aman: Rotate the threaded coupling nut on the female connector clockwise until it is hand-tight. Do not overtighten, but ensure a secure connection to prevent accidental disconnection or ingress of contaminants.
- Perutean Kabel: Route the cable in a manner that avoids sharp bends, kinks, or areas where it could be pinched, cut, or exposed to excessive heat or abrasion. Use cable ties or clampjika perlu untuk mengamankan jalur kabel.
- Verifikasi: After installation, visually inspect the connection to ensure it is fully seated and secured.
5. Petunjuk Pengoperasian
The TURCK WKB 3T-4 Cable Assembly functions as a passive electrical conduit, transmitting power and/or signals between connected devices. Once properly installed, its operation is dependent on the connected equipment.
- Ensure the cable is not subjected to stresses beyond its design limits (e.g., excessive pulling force, sharp impacts).
- Verify that the connected devices are operating within the cable's specified voltage and current ratings (4A, 250V).
- The right-angle design is particularly useful for applications where space is limited or where the cable needs to run parallel to a surface immediately after the connection point.
6. Pemeliharaan
Regular maintenance helps ensure the longevity and reliable performance of your cable assembly:
- Pembersihan: Periodically clean the exterior of the cable and connector with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring the connector pins are dry before re-connecting.
- Inspeksi: Regularly inspect the cable jacket for cracks, cuts, abrasions, or discoloration. Check the connector for bent pins, corrosion, or loose components.
- Integritas Koneksi: Periodically check the tightness of the connector's coupling nut to ensure it remains secure.
- Penyimpanan: When not in use, store the cable in a clean, dry environment, away from extreme temperatures and direct sunlight. Avoid coiling the cable too tightly.
7. Penyelesaian masalah
This section addresses common issues you might encounter with the cable assembly.
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| No power/signal transmission | Koneksi longgar Kabel/konektor rusak Incorrect wiring (external to cable) | Ensure connector is fully seated and coupling nut is tight. Inspect cable for visible damage; replace if damaged. Verify wiring of connected devices. |
| Koneksi terputus-putus | Koneksi longgar Korosi pada pin Kerusakan kabel internal | Tighten coupling nut. Clean connector pins carefully (with power off). Replace cable if internal damage is suspected. |
| Connector difficult to mate | Ketidakselarasan Kotoran di konektor Bent pins | Ensure correct orientation and alignment. Clean connector thoroughly. Inspect for bent pins; if found, cable may need replacement. |
8. Spesifikasi
Detailed technical specifications for the TURCK WKB 3T-4 Cable Assembly:
| Atribut | Nilai |
|---|---|
| Nomor Model | WKB 3T-4 |
| Merek | TURKI |
| Jenis Konektor | Right Angle 1/2-20UNF Female |
| Konfigurasi Kawat | 3 Kawat |
| Panjang Kabel | 4 Meters (4M) |
| Peringkat Saat Ini | 4 Amperes (4A) |
| Jil.tage Peringkat | 250 Volts (250V) |
| Bahan Selongsong Kabel | AWM PVC |
| Warna | Hitam |
| Penggunaan Dalam/Luar Ruangan | Dalam Ruangan, Luar Ruangan |
| Membentuk | Bulat |
| Tanggal Pertama Tersedia | 30 April 2020 |
9. Garansi dan Dukungan
TURCK products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official TURCK webkunjungi situs web kami atau hubungi distributor resmi Anda.
For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact TURCK customer service or your local TURCK representative. Contact information can usually be found on the official TURCK weblokasi (www.turck.com).
