1. Pendahuluan
This manual provides detailed instructions for the installation, operation, and maintenance of your Brightever Motion Sensor LED Ceiling Light, Model BVR-MSL-15W-2PACK. This flush mount fixture features a PIR motion sensor, three selectable color temperatures (3000K, 4000K, 5000K), and energy-efficient LED lighting, designed for various indoor and outdoor applications such as hallways, closets, and stairways.
Gambar 1: Depan view of two Brightever Motion Sensor LED Ceiling Lights.
2. Informasi Keselamatan Penting
- PERINGATAN: Risiko sengatan listrik. Putuskan sambungan daya pada sekring atau pemutus arus sebelum memasang atau menyervis.
- Produk ini harus dipasang sesuai dengan kode pemasangan yang berlaku oleh orang yang memahami konstruksi dan pengoperasian produk serta bahayanya.
- Use only copper supply wires rated for 90°C.
- Jangan mencoba memodifikasi perlengkapan. Modifikasi apa pun dapat membatalkan garansi dan menimbulkan bahaya keselamatan.
- Pastikan permukaan tempat pemasangan mampu menopang berat perlengkapan tersebut.
- Jauhkan bahan kemasan dari jangkauan anak-anak.
3. Isi Paket
Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:
- Brightever Motion Sensor LED Ceiling Light (2 units)
- Perangkat Keras Pemasangan (sekrup, mur kawat)
- Instruksi Manual (dokumen ini)
4. Spesifikasi Produk
| Merek | Lebih cerah |
| Nomor Model | BVR-MSL-15W-2PACK |
| Sumber Daya | Mesin Cuci Listrik Berkabel (Terhubung Langsung ke Listrik) |
| Apatage | 15 Watt (Setara dengan 100W Lampu Pijar) |
| Kecerahan | 1200 lumen cahaya |
| Suhu Warna | 3000K (Warm White), 4000K (Daylight White), 5000K (Cool White) |
| Jenis Sensor Gerak | PIR (Inframerah Pasif) |
| Rentang Deteksi Gerakan | 9.8 - 19.6 kaki (3 - 6 meter) |
| Timer Mati Otomatis | 60 seconds (after no motion detected) |
| Sudut Balok | 360° |
| Sudut Deteksi | 120° |
| Jangka hidup | 25,000+ jam |
| Ukuran | 7.5x7.5x7.5 inci |
| Jenis Instalasi | Siram gunung |
| Penggunaan Dalam/Luar Ruangan | Luar Ruangan (Tahan Air) |
5. Pengaturan & Instalasi
Follow these steps to properly install your Motion Sensor LED Ceiling Light. It is recommended to have a qualified electrician perform the installation if you are unfamiliar with electrical wiring.
5.1 Sebelum Instalasi
- Matikan Daya: Locate the circuit breaker controlling the light fixture's location and turn off the power. Verify power is off using a voltage penguji.
- Pilih Suhu Warna: Before mounting, choose your desired color temperature (3000K, 4000K, or 5000K) using the switch located on the back of the fixture. This switch is not accessible after installation.
Figure 2: Adjusting the color temperature switch on the back of the fixture before installation.
Gambar 3: Rinci view of the color temperature selection switch.
5.2 Pengkabelan dan Pemasangan
- Connect the fixture's wires to your household wiring: black to black (live), white to white (neutral), and bare copper to bare copper (ground). Secure connections with wire nuts.
- Align the fixture with the mounting holes in your junction box.
- Secure the fixture to the ceiling using the provided mounting hardware. Ensure it is flush and stable.
- Once secured, turn the light cover clockwise to lock it into place.
- Pulihkan daya pada pemutus arus.
Video 1: User demonstration of unboxing and showing the wiring connections and color temperature switch on the Brightever Motion Sensor LED Ceiling Light. This video provides a visual guide to the internal components and initial setup steps.
Video 2: Official product video demonstrating the installation process of the Motion Sensor LED Ceiling Light, including wiring and securing the fixture to the ceiling.
6. Petunjuk Pengoperasian
6.1 Fungsionalitas Sensor Gerak
The Brightever Motion Sensor LED Ceiling Light is equipped with a PIR (Passive Infrared) motion sensor. The light will automatically turn on when motion is detected within its range and will turn off approximately 60 seconds after no motion is detected. This feature helps conserve energy and provides light only when needed.
- Jangkauan Deteksi: The sensor can detect motion from 9.8 to 19.6 feet (3 to 6 meters).
- Sudut Deteksi: The sensor has a 120° detection angle.
- Sudut Pancaran: The light provides a 360° beam angle for wide illumination.
Figure 4: Motion sensor detection range and angles.
Video 3: User demonstration of the motion sensor LED ceiling lights installed in an attic, showing how they automatically turn on when motion is detected.
Suhu Warna 6.2
The color temperature is set during installation using a switch on the back of the fixture. It cannot be changed during operation without dismounting the fixture. Choose from:
- 3000K: Warm White, ideal for creating a cozy atmosphere.
- 4000K: Daylight White, suitable for general tasks and everyday lighting.
- 5000K: Cool White, best for task lighting and areas requiring high visibility.
Gambar 5: Contohamples of different color temperatures (3000K and 5000K) in various settings.
7. Pemeliharaan
- Pembersihan: Pastikan daya dimatikan sebelum membersihkan. Lap perlengkapan dengan kain lembut, kering, atau sedikit kering.amp kain. Jangan gunakan bahan kimia keras atau pembersih abrasif.
- Penggantian Bohlam: This fixture uses integrated LED components and does not require bulb replacement.
- Inspeksi: Periksa perlengkapan listrik secara berkala untuk melihat tanda-tanda kerusakan atau sambungan yang longgar. Jika ditemukan masalah, putuskan aliran listrik dan konsultasikan dengan teknisi listrik yang berkualifikasi.
8. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu tidak menyala. | Tidak ada daya ke perlengkapan. Pengkabelan yang salah. Sensor gerak terhalang atau rusak. | Periksa pemutus arus dan sakelar dinding. Verify wiring connections (black to black, white to white, ground to ground). Ensure motion sensor is clear and not covered. Test sensor by moving within range. |
| Lampu tetap menyala terus menerus. | Gerakan konstan terdeteksi. Sensor sensitivity too high. Sensor rusak. | Ensure no continuous motion in the detection area. Check if the light is installed in an area with constant air movement or heat sources that might trigger the sensor. Jika masalah berlanjut, hubungi dukungan. |
| Lampu berkedip atau redup. | Sambungan kabel longgar. Masalah catu daya. Kerusakan perlengkapan. | Turn off power and re-check all wiring connections. Consult an electrician to check household power supply. If damaged, discontinue use and contact support. |
| Sensor gerak tidak mendeteksi. | Halangan. Penempatan yang salah. Kerusakan sensor. | Singkirkan semua benda yang menghalangi sensor. view. Ensure the sensor is positioned to cover the desired area (120° detection angle). Jika masalah berlanjut, hubungi dukungan. |
9. Garansi & Dukungan
Brightever products come with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Brightever website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Brightever customer service through the retailer where the product was purchased or via the contact information provided on the Brightever weblokasi.
We proudly stand behind all of our products 100% and value your feedback to ensure a perfect purchase experience.
