1. Pendahuluan
This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.
Harap baca manual ini dengan saksama sebelum menggunakan produk untuk memastikan pengoperasian yang aman dan efisien.
2. Informasi Keselamatan
WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.
- Pastikan aliran listrik terputus sebelum pemasangan, pengkabelan, atau perawatan.
- Only qualified personnel should install and service this device.
- Jangan melebihi volume yang ditentukantage dan peringkat saat ini.
- Protect the sensor from mechanical impact and excessive vibration.
- Do not modify the sensor. Unauthorized modifications may void the warranty and compromise safety.
3. Produk Lebihview
The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:
- Model: NI3-EG08K-AP6X-V1131
- Rentang Penginderaan: ukuran 3mm
- Perumahan: M8x1 Barrel, 8mm stainless steel full threading short barrel
- Tipe Keluaran: Normally Open (NO) PNP
- Volume Operasitage: Tegangan 10-30 VDC
- Koneksi: M8 Male Connector (Picofast 3-Pin QD Connector)
- Indikator: 1 LED for operational status
This sensor is designed for reliable detection of metallic targets in industrial environments.
4. Pengaturan dan Instalasi
4.1 Pemasangan
- Select a mounting location where the sensor is protected from physical damage and excessive heat.
- Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
- Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.
4.2 Pengkabelan
The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:
- Pin 1 (Brown): +VDC (10-30VDC)
- Pin 3 (Blue): 0VDC (Ground)
- Pin 4 (Black): Output (PNP, Normally Open)
Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.
5. Operasi
Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:
- MEMIMPIN: Indicates that a metallic object is within the sensing range and the output is active (PNP output is high).
- LED MATI: Indicates no metallic object is detected within the sensing range and the output is inactive (PNP output is low).
The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.
6. Pemeliharaan
The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.
- Pembersihan: Periodically clean the sensor face to remove dust, dirt, or debris that may accumulate and affect sensing performance. Use a soft, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
- Inspeksi: Check wiring and connections for any signs of damage, corrosion, or loose contacts. Ensure the sensor is securely mounted and not subjected to excessive vibration.
- Kondisi Lingkungan: Pastikan lingkungan pengoperasian tetap dalam kisaran suhu dan kelembapan yang ditentukan.
7. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Sensor not detecting objects / LED always OFF |
|
|
| Sensor always ON / LED always ON |
|
|
| Deteksi terputus-putus |
|
|
8. Spesifikasi
| Parameter | Nilai |
|---|---|
| Nomor Model | NI3-EG08K-AP6X-V1131 |
| Pabrikan | Turck |
| Jangkauan Penginderaan | ukuran 3mm |
| Tipe Perumahan | M8x1 Barrel, 8mm stainless steel full threading short barrel |
| Jenis Keluaran | PNP, Biasanya Terbuka (TIDAK) |
| Volume Operasitage | Tegangan 10-30 VDC |
| Koneksi | M8 Male Connector (Picofast 3-Pin QD) |
| Indikator | 1 lampu LED |
| ASIN | B0898TS8W2 |
| Tanggal Pertama Tersedia | 27 Mei 2020 |
9. Garansi dan Dukungan
For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.
For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.
Turck Official Weblokasi: www.turck.com
