Aerocool Trinity Mini TRINITYMINIBKV2 Mini ATX Tower Case User Manual

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your Aerocool Trinity Mini TRINITYMINIBKV2 Mini ATX Tower Case. This compact PC case features a tempered glass side panel and pre-installed FRGB fans, designed for Micro ATX and Mini ITX motherboards. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Figure 1: Aerocool Trinity Mini TRINITYMINIBKV2 PC Case. This image shows the front and side view of the black PC case, highlighting the tempered glass panel and the illuminated FRGB fans.

2. Informasi Keselamatan

• Selalu cabut catu daya dari stopkontak sebelum memasang atau memperbaiki komponen apa pun di dalam casing PC.
• Handle the tempered glass side panel with extreme care. Tempered glass can shatter if dropped or struck with force.
• Avoid exposing the case to extreme temperatures, high humidity, or direct sunlight.
• Keep all small parts, screws, and accessories out of reach of children.
• Pastikan ventilasi yang baik di sekitar casing PC untuk mencegah panas berlebih.
• Jangan mencoba memodifikasi casing atau komponennya, karena hal ini dapat membatalkan garansi Anda dan menimbulkan risiko keselamatan.

3. Isi Paket

Verifikasi bahwa semua item yang tercantum di bawah ini ada dalam paket Anda:

• Aerocool Trinity Mini TRINITYMINIBKV2 PC Case (Black)
• Pre-installed FRGB Fans (2x 12cm front, 1x 12cm rear)
• Accessory Kit (various screws, motherboard standoffs, cable ties)
• User Manual (dokumen ini)

4. Spesifikasi

5. Panduan Pengaturan dan Instalasi

Follow these steps to install your PC components into the Aerocool Trinity Mini TRINITYMINIBKV2 case.

5.1. Mempersiapkan Kasus

1. Letakkan wadah tersebut di atas permukaan yang datar dan stabil.
2. Carefully remove the tempered glass side panel by unscrewing the thumbscrews at the rear of the case. Set the panel aside on a soft, non-abrasive surface.
3. Remove the opposite steel side panel by unscrewing its thumbscrews and sliding it backward.

5.2. Instalasi Motherboard

1. Pasang pelindung I/O (jika belum terpasang di motherboard Anda) ke lubang belakang casing.
2. Align your Micro ATX or Mini ITX motherboard with the pre-installed standoffs inside the case. Ensure the screw holes on the motherboard match the standoffs.
3. Secure the motherboard using the appropriate screws from the accessory kit. Do not overtighten.

5.3. Instalasi Drive Penyimpanan (HDD/SSD)

The case supports various storage configurations. Refer to the case interior for specific drive bay locations.

1. For 3.5" HDDs: Slide the drive into the designated drive cage bays and secure with screws.
2. For 2.5" SSDs: Mount the SSDs onto the dedicated mounting points, typically behind the motherboard tray or on top of the PSU shroud, and secure with screws.

5.4. Instalasi Unit Catu Daya (PSU)

1. Position your PSU into the bottom-mounted PSU shroud area.
2. Sejajarkan PSU dengan lubang sekrup di bagian belakang casing.
3. Secure the PSU using the four screws provided in your PSU's accessory kit or the case's accessory kit.

5.5. Pemasangan Kipas dan Sistem Pendingin

The case comes with two 12cm FRGB fans pre-installed at the front and one 12cm FRGB fan at the rear. These fans provide fixed RGB lighting effects.

• Penggemar Tambahan: The case supports additional fans at the top. Refer to the product specifications for maximum fan sizes and quantities.
• Pendinginan Cair: Radiators can be installed at the front or top of the case, depending on size. Ensure proper clearance with other components.
• Connect all fan power cables to appropriate headers on your motherboard or a fan controller.

5.6. Manajemen Kabel

Effective cable management improves airflow and aesthetics.

• Route cables through the cutouts and grommets behind the motherboard tray.
• Use the included cable ties to bundle and secure cables, keeping them tidy and out of the main airflow path.
• Hubungkan semua kabel daya yang diperlukan dari PSU ke motherboard, GPU, dan drive penyimpanan.
• Connect the front panel I/O cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their respective headers on the motherboard. Refer to your motherboard manual for correct pin assignments.

5.7. Perakitan Akhir

1. Once all components are installed and cables are managed, reattach the steel side panel and secure it with thumbscrews.
2. Carefully reattach the tempered glass side panel and secure it with its thumbscrews.

6. Petunjuk Pengoperasian

6.1. Menghidupkan/Mematikan

• Nyalakan: Press the power button located on the top front panel of the case.
• Matikan: Initiate a shutdown from your operating system. Alternatively, press and hold the power button for several seconds for a forced shutdown (not recommended for regular use).
• Atur ulang: Press the reset button on the top front panel to restart the system.

6.2. FRGB Fan Operation

The pre-installed fans feature Fixed RGB (FRGB) lighting. This means the fans display a fixed spectrum of colors and do not offer customizable lighting effects or synchronization with motherboard RGB software. The lighting will activate automatically when the fans receive power.

7. Pemeliharaan

Perawatan rutin membantu memastikan kinerja optimal dan umur panjang komponen PC Anda.

• Filter Debu: Periodically check and clean any removable dust filters (e.g., at the front, top, or bottom of the case). Use compressed air or rinse with water (ensure completely dry before reinstallation).
• Bagian Luar Casing: Lap permukaan luar dengan lembut, damp kain. Hindari pembersih atau pelarut abrasif.
• Penggemar: Use compressed air to gently clean dust from fan blades. Do not attempt to lubricate or disassemble the fans.
• Pembersihan Interior: With the power off and unplugged, use compressed air to remove dust buildup from internal components.

8. Penyelesaian masalah

Jika Anda mengalami masalah, ikuti langkah-langkah pemecahan masalah umum berikut:

• Tidak Ada Daya:
  • Ensure the PSU is switched on at the back.
  • Periksa semua sambungan daya ke motherboard dan komponen.
  • Verify front panel power switch cables are correctly connected to the motherboard.
• Kipas Tidak Berputar / Lampu RGB Tidak Berfungsi:
  • Periksa sambungan daya kipas ke motherboard atau pengontrol kipas.
  • Ensure FRGB fans are receiving power. Remember, FRGB lighting is fixed and not software controllable.
• Terlalu panas:
  • Ensure all fans are spinning correctly and are oriented for proper airflow (intake/exhaust).
  • Clean any dust filters and internal components.
  • Verify adequate space around the case for ventilation.
• USB/Audio Panel Depan Tidak Berfungsi:
  • Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the correct headers on your motherboard.

9. Garansi dan Dukungan

For warranty information and technical support, please refer to the official AeroCool websitus web atau hubungi penjual Anda. Simpan bukti pembelian Anda untuk klaim garansi.

AeroCool Official Weblokasi: www.aerocool.io